Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters Alert Service Bulletin BO105-40A-112 · 8 pages · 356 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-5385, the docket of AD 2025-25-05. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2025-5385 (document 0002) · AD 2025-25-05

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
BO105-40A-112

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 8OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-5385, the docket of AD 2025-25-05. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ac9ef3b6e0aec787132fccc89fd760705ad2a95e223ac9cc597cc14d82e8650c'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112 Valid for version(s): C (C23, CB, CB-4, CB-5), D (DB, DBS, DB-4, DBS-4, DBS-5), S (CS, CBS, CBS-4, CBS-5)

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE FLIGHT CONTROLS - Main Rotor Controls Inspection of the fork lever For the attention of Revision No. Date of issue Revision O 2025-09-23 Summary:

With this Alert Service Bulletin (ASB), Airbus Helicopters prescribes a visual inspection of the fork lever of the mixing lever assembly.

Compliance:

It is mandatory to comply with this ASB.

Export Control:

US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.

GE Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/GE.

Revision 0, 2025-09-23 PAGE 1 of 8 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

PLANNING INFORMATION

1.A EFFECTIVITY

1.A.1 Helicopters/installed equipment and parts

a) BO105 C, D, S, all S/N.

b) Fork lever P/N 105-42122.01 P/N 117-421231.02

1.A.2 Non-installed equipment and parts See Section 1.A.1.b)

1.B ASSOCIATED REQUIREMENTS None.

1.C REASON During a maintenance task, a crack was found on the fork lever of the mixing lever assembly.

Therefore, Airbus Helicopters prescribes a one-time visual inspection for cracks on the fork lever.

1.D DESCRIPTION This ASB provides instructions to visually inspect the fork lever for cracks.

PAGE 2 of 8 Revision 0, 2025-09-23 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - GETEC NotListed

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

1.E COMPLIANCE

1.E.1 Compliance at helicopter manufacturer level This paragraph is left empty by intention.

1.E.2 Compliance in service Helicopters/installed equipment and parts:

Do the one-time inspection of the fork lever, refer to Section 3.B, within 100 Fh (+ 10 Fh margin) or 1 month after receipt of this ASB at the latest (refer to the issue date).

Non-installed equipment and parts:

Do the one-time inspection of the fork lever, refer to Section 3.B, within 1 month at the latest (refer to the issue date) or before installation on the helicopter, whatever occurs first.

1.F APPROVAL Approval of this document:

The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA.21J.700.

1.G MANPOWER The man-hours are an estimate given for information only and for a standard helicopter configuration.

Inspection of the fork lever without removal/installation:

Qualification Mechanic Electrician Pilot Others Estimated 1h - - Man-hours Inspection of the fork lever with removal/installation:

Qualification Mechanic Electrician Pilot Others Estimated 8 h Man-hours

1.H WEIGHT AND BALANCE No effect on weight and balance.

POWER CONSUMPTION Not affected.

1.J SOFTWARE UPGRADES/UPDATES None.

Revision 0, 2025-09-23 PAGE 3 of 8 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US EC NoUScontent - GE EC NotListed

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

1.K REFERENCES Maintenance Manual (MM).

1.L OTHER AFFECTED PUBLICATIONS Not affected.

1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Not affected.

PAGE 4 of 8 Revision 0, 2025-09-23 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US_EC_NoUScontent - GE EC NotListed

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112 2 MATERIAL INFORMATION

2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT None.

2.B LOGISTIC INFORMATION None.

2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT None.

2.D MATERIAL TO BE RETURNED None.

Revision 0, 2025-09-23 PAGE 5 of 8 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US EC_NoUScontent - GE EC NotListed

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL None.

З.В WORK STEPS З.В.1 Preliminary steps NOTE The following inspection can be done on the installed fork lever using a borescope suitable for visual inspections. If a borescope is not available or in case of doubts

(i.e. ability to access the inspection area with the boroscope, suitability of the borescope, uncertain crack indication), it is necessary to remove the control lever for the visual inspection.

1. If necessary, remove the mixing lever assembly (MM 41-66).

3.B.2 Procedure Visually inspect the fork lever (1, Figure 1) for cracks with special attention to the highlighted areas, as shown in Figure 1 (MTC 20-08-05-106).

2. In case of any doubts on the result from the visual inspection, create an Technical Event (TE) on WebTEK for further instructions:

https://technicalservices.airbusworld.helicopters.airbus.com/webtek/ technicalEvent/create

3. If any crack is found replace the fork lever (1) before the next flight as follows:

a. If not removed, remove the mixing lever assembly (MM 41-66).

b. Disassemble the mixing lever assembly (MM 41-67).

c. Replace the fork lever (1).

d. Assemble the mixing lever assembly (MM 41-69).

e. Install the mixing lever assembly (MM 41-70).

f. Do not discard the cracked fork lever until further notice.

g. Create an TE on WebTEK and provide the following data to Airbus Helicopters:

https://technicalservices.airbusworld.helicopters.airbus.com/webtek/ technica Event/create ASB identifier.

- Helicopter version.

- Helicopter S/N

- P/N of the fork lever.

- S/N of the fork lever.

Time since new (TSN) of the fork lever, or of the helicopter if the TSN of the fork lever is unknown.

- Detailed photos of the crack.

h. Proceed with Section 3.C.

PAGE 6 of 8 Revision 0, 2025-09-23 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US EC_NoUScontent - GE EC NotListed

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

4. If no crack is found, inspect the mixing lever assembly for condition, including the corrective actions in the refered MM section (MM 41-3, Section 4.a.).

5. If the inspection shows no irregular results, proceed with Section 3.B.3.

TOP BOTTOM

SIDE SIDE RH side shown.

LH side is identical.

Area to be inspected with special attention.

Figure 1 Revision 0, 2025-09-23 PAGE 7 of 8 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US EC_NoUScontent - GE EC NotListed

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB BO105-40A-112

3.B.3 Final steps

1. If the mixing lever assembly was removed, install the mixing lever assembly (MM 41-70).

З.С COMPLIANCE CONFIRMATION Compliance with this document:

Record compliance with this ASB, with the revision number, in the helicopter documents.

Record compliance with this ASB, with the revision number, in the log card of the equipment (if a log card exists).

Record the compliance with this ASB:

QR-Code or hypertext link Sitt NOTE The recording of compliance with ASB in the SB Insight tool does not replace the recording in the helicopter documents.

ASB BO105-40A-112

3.D OPERATING AND MAINTENANCE INSTRUCTIONS None.

APPENDIX None.

PAGE 8 of 8 Revision 0, 2025-09-23 This document is available on the internet: www.airbushelicopters.com/techpub/ Export Control: US EC_NoUScontent - GE EC NotListed