Service bulletin · Eurocopter

Revision 1Airbus Helicopters ASB No. MBB-BK117 C-2-32A-011 Rev 1 · 48 pages · 3.6 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0496, the docket of AD 2021-17-17. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0496 (document 0004) · AD 2021-17-17

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Service Bulletin
Number
C-2-32A-011
Latest revision known
C-2-32A-011, Revision 1

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 48Partly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0496, the docket of AD 2021-17-17. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'e5163afd8dcebfd5b8552c33c6c36830b678d1feb69b3221ea2e7fd0911180e8'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011 Valid for Version(s): C-2, C-2e.

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE LANDING GEAR - Emergency Flotation System Inspection of flotation supply hoses For the attention of Revision No. Date of issue Revision 0 2020-01-07 Revision 1 2020-02-12 Summary:

During maintenance operations on the Emergency Flotation System (EFS) of an AS365 helicopter, the third compartment of the LH front flotation balloon did not inflate.

After analysis, the hose that supplies the gas flow from the cylinder assembly to the related flotation balloon compartment was found clogged.

This Alert Service Bulletin (ASB) provides the instructions for checking that there is no obstruction in the flotation balloon supply hoses of the EFS.

Reason for Revision:

Please replace Revision 0 of this ASB with Revision 1.

With Revision 1 details have been specified more precisely and the revision 1 of the Safran SB has been incorporated.

Revision 1 of this ASB affects compliance with Revision 0 of this ASB.

If Revision 0 of this ASB has been accomplished, please refer to table 3 (respectively table 6) and to Section 1.A.2.b and consider the additional requirements.

Compliance:

Compliance with this ASB is mandatory.

Revision 1, 2020-02-12 PAGE 1 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011 1 PLANNING INFORMATION

1.A NEFFECTIVITY

1.A.1 Helicopters/ installed equipment and parts Affected Parts

a) MBB-BK117 C-2, C-2e, all S/N, equipped with Emergency Flotation System.

AFT R / H FLOAT AERAZUR P/N SERIAL NUMBER 216 997 - 0

DATE OF MANUFACTURE JUL. 2001 Example of an identification tag

b) Parts with the following P/N and for which the emergency flotation system parts have been produced before the issue date of Revision 0 of this ASB:

Emergency flotation Safran equipment Flotation balloon system part P/N designation P/N Affected hose P/N 216694-1 LH FWD Float Assy 216686-0 216679-0 216696-0 LH AFT Float Assy 216688-0 216680-0 216695-1 RH FWD Float Assy 216687-0 216679-0 216787-0 RH AFT Float Assy 216997-0 216680-0 Table 1 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18) PAGE 2 of 11 Revision 1, 2020-02-12 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011 Non-affected S/N

a) S/N excluded (because already checked by Safran Aerosystems):

Emergency Safran Flotation flotation equipment balloon S/N excluded system designation P/N part P/N LH FWD 11, 21, 26, 48, 49, 64, 74, 116, 119, 150, 152, 178, 216694-1 216686-0 180, 182, 188, 193, 195, 196, 198, 208, 210, 211, 213, Float Assy 217, 218, 222, 223, 224, 225, 226, 227 11, 21, 26, 42, 44, 67, 71, 88, 102, 108, 111, 125, 128, LE AFT 138, 142, 151, 166, 173, 177, 183, 186, 188, 189, 190, 216696-0 216688-0 Float Assy 192, 194, 205, 206, 209, 212, 213, 214, 216, 217, 218, 219, 221 RH FWD 10, 20, 25, 28, 46, 73, 111, 114, 126, 133, 142, 143, 216695-1 Float Assy 216687-0 145, 174, 176, 178, 179, 188, 190, 193, 194, 196, 206, 208, 209, 212, 213, 214, 218, 219, 220, 221, 222, 223 10, 20, 27, 43, 45, 68, 72, 88, 101, 106, 109, 126, 128, 216787-0 Float Assy RH AFT 216997-0 139, 140, 144, 167, 174, 175, 178, 184, 186, 189, 190, 192, 204, 206, 208, 209, 210, 214, 215, 216, 217, 218, 219 Table 2 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18)

b) In the following table, S/N can be excluded only if it can be secured that no hoses have been replaced during any MRO action and the flotation balloon was originally delivered together with the helicopter. If this information cannot be secured, then consider that the S/N are affected:

Emergency Safran Flotation Excluded S/N, only if it can be secured that no flotation hoses have been replaced during any MRO equipment balloon system designation P/N action and the flotation balloon was originally part P/N delivered together with the helicopter LH FWD 216694-1 216686-0 112 and higher Float Assy LH AFT 216696-0 216688-0 99 and higher Float Assy RH FWD 216695-1 216687-0 103 and higher Float Assy RE AFT 216787-0 216997-0 99 and higher Float Assy Table 3 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18) NOTE Helicopters on which Safran Aerosystems Service Bulletin No.

025-69-18 is marked on the Log Cards of the EFS are not concerned.

NOTE Refer to the Log Cards to identify the current modification status of the equipment.

Revision 1, 2020-02-12 PAGE 3 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011

1.A.2 Non-installed equipment and parts Affected Parts

a) Parts with the following P/N and for which the emergency flotation system parts have been produced before the issue date of Revision 0 of this ASB:

Emergency flotation Safran equipment Flotation balloon Hose P/N system part P/N* designation P/N 216694-1 LH FWD Float Assy 216686-0 216679-0 216696-0 LH AFT Float Assy 216688-0 216680-0 216695-1 RH FWD Float Assy 216687-0 216679-0 216787-0 RH AFT Float Assy 216997-0 216680-0 * Emergency flotation system part consists of a flotation balloon and hoses.

Table 4 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18)

b) Safran Aerosystems spare hoses, produced before January 2014 and without a visible green "dot" on the base of the end fitting (or banjo union):

- P/N 216679-0

- P/N 216680-0 NOTE Hoses with a visible green "dot" on the base of the end fitting (or banjo union) are already inspected.

Non-affected S/N

a) S/N excluded (because already checked by Safran Aerosystems):

Emergency Safran Flotation flotation equipment balloon S/N excluded system designation P/N part P/N LH FWD 11, 21, 26, 48, 49, 64, 74, 116, 119, 150, 152, 178, 216694-1 216686-0 180, 182, 188, 193, 195, 196, 198, 208, 210, 211, 213, Float Assy 217, 218, 222, 223, 224, 225, 226, 227 11, 21, 26, 42, 44, 67, 71, 88, 102, 108, 111, 125, 128, 216696-0 LH AFT 216688-0 138, 142, 151, 166, 173, 177, 183, 186, 188, 189, 190, Float Assy 192, 194, 205, 206, 209, 212, 213, 214, 216, 217, 218, 219, 221 RH FWD 10, 20, 25, 28, 46, 73, 111, 114, 126, 133, 142, 143, 216695-1 Float Assy 216687-0 145, 174, 176, 178, 179, 188, 190, 193, 194, 196, 206, 208, 209, 212, 213, 214, 218, 219, 220, 221, 222, 223 10, 20, 27, 43, 45, 68, 72, 88, 101, 106, 109, 126, 128, 216787-0 RH AFT 216997-0 139, 140, 144, 167, 174, 175, 178, 184, 186, 189, 190, Float Assy 192, 204, 206, 208, 209, 210, 214, 215, 216, 217, 218, 219 Table 5 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18) PAGE 4 of 11 Revision 1, 2020-02-12 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011

b) In the following table, S/N can be excluded only if it can be secured that no hoses have been replaced during any MRO action and the flotation balloon was originally delivered together with the helicopter. If this information cannot be secured, then consider that the S/N are affected:

Emergency Safran Flotation Excluded S/N, only if it can be secured that no flotation equipment balloon hoses have been replaced during any MRO system designation P/N action and the flotation balloon was originally part P/N delivered together with the helicopter LH FWD 216694-1 216686-0 112 and higher Float Assy LH AFT Float 216696-0 216688-0 99 and higher Assy RH FWD 216695-1 216687-0 103 and higher Float Assy RH AFT Float 216787-0 216997-0 99 and higher Assy Table 6 (assumed from Safran Aerosystems Service Bulletin No. 025-69-18) NOTE EFS parts on which Safran Aerosystems Service Bulletin No. 025-69-18 is marked on the Log Card are not concerned.

1.B ASSOCIATED REQUIREMENTS Not applicable.

1.C REASON During maintenance operations on the EFS of an AS365 helicopter, the third compartment of the LH front flotation balloon did not inflate.

After analysis, the hose that supplies the gas flow from the cylinder assembly to the related flotation balloon compartment was found clogged.

This ASB provides the instructions for checking that there is no obstruction in the flotation balloon supply hoses of the EFS.

1.D DESCRIPTION Remove the Float assembly. Inspect the Float assembly according Safran Aerosystems Service Bulletin No. 025-69-18. Install the Float assembly.

Revision 1, 2020-02-12 PAGE 5 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011

1.E COMPLIANCE

1.E.1 Compliance at H/C manufacturer level Airbus Helicopters makes it mandatory to comply with the instructions of Section 3 of this ASB before the delivery of the helicopter (or the equipment).

1.E.2 Compliance in service Helicopters/installed equipment and parts:

Case 1: Helicopters operated over water.

Comply with Section 3 of this ASB within 600 flight hours from receipt of Revision 0 of this ASB or at the next scheduled inspection of the float assy, whatever comes first.

Case 2: Helicopters not operated over water.

Comply with Section 3 of this ASB at the next scheduled inspection of the float assy.

Non-installed equipment and parts:

Before installation on the helicopter or on the Float assembly, check parts in accordance with Section 3.B.3 of this ASB without exceeding 6 months after receipt of Revision 0 of this ASB.

PAGE 6 of 11 Revision 1, 2020-02-12 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS • ASB MBB-BK117 C-2-32A-011 START Check the P/N of the No Float assembly / the related Float, if affected in accordance with table 1 (respectively table 4) Yes Check if the manufacturing date No of the Float assembly is before the publication date of Revision 0 of this ASB Yes Can Check it be secured, if the S/N of the Float that no hoses have been assembly is equal or higher as the replaced during any MRO action and the S/N mentioned in table 3 flotation balloon was originally Yes (respectively Yes delivered together with table 6) the helicopter?

No Check No if the S/N of the Float assembly is mentioned in table 2 (respectively table 5) Yes (already verified by (already verified) Safran) No (not verified) Accomplish Section 3 Accomplish Section 3.C of this ASB of this ASB ASB completed Decision Diagram Figure 1 Revision 1, 2020-02-12 PAGE 7 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011

1.F APPROVAL Approval of this document:

The technical content of this document is approved under the authority of DOA No. EASA.21J.700.

1.G MANPOWER Qualification Mechanic Electrician Pilot Others Estimated approx. 2 h Man-hours (approx. 11 h*) *Including inspection of the hoses.

1.H WEIGHT AND BALANCE No effect on weight and balance.

1.I POWER CONSUMPTION Not affected.

1.J SOFTWARE UPGRADES/UPDATES Not changed.

1.K REFERENCES AMM MBB-BK117 C-2, Component Maintenance Manuals (CMM).

1.L OTHER AFFECTED PUBLICATIONS Not affected.

1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Not affected.

PAGE 8 of 11 Revision 1, 2020-02-12 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS • ASB MBB-BK117 C-2-32A-011 2 MATERIAL INFORMATION

2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Refer to paragraph 2 of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

2.B LOGISTIC INFORMATION Refer to paragraph 2 of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Refer to paragraph 2 of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

2.D MATERIAL TO BE RETURNED Refer to paragraph 3.C of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

Revision 1, 2020-02-12 PAGE 9 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011

ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Not applicable.

З.В WORK STEPS З.В.1 Preliminary steps

1. De-energize the helicopter electrical system (AMM 24-00-00, 2-1).

3.B.2 Procedure

1. Remove the affected Float assembly (AMM 32-15-00, 4-1).

NOTE The inspection as per Safran Aerosystems Service Bulletin No.

025-69-18 (Appendix) must be performed by the Safran Aerosystems Services network or by staff able to perform the float maintenance in accordance with applicable maintenance documentation.

2. For staff not able to perform the float maintenance:

- Return the affected Float assembly to the Safran Aerosystems network for compliance with the Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

For staff able to perform the float maintenance:

- Comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No.

025-69-18 (Appendix).

3. Install the Float assembly (AMM 32-15-00, 4-1).

З.В.З Work steps for non-installed equipment or parts

1. Float assembly:

NOTE The inspection as per Safran Aerosystems Service Bulletin No.

025-69-18 (Appendix) must be performed by the Safran Aerosystems Services network or by staff able to perform the float maintenance in accordance with applicable maintenance documentation.

For staff not able to perform the float maintenance:

- Return the Float assembly to the Safran Aerosystems network for compliance with the Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

For staff able to perform the float maintenance:

- Comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No.

025-69-18 (Appendix).

2. Spare hoses:

a. Accomplish the inspection of the spare hoses in accordance with paragraph 3 of the Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix).

PAGE 10 of 11 Revision 1, 2020-02-12 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB MBB-BK117 C-2-32A-011 З.С COMPLIANCE CONFIRMATION Compliance with this document:

Confirm accomplishment of this ASB by an entry in the historical record of the helicopter.

Confirm accomplishment of this ASB by an entry in the concerned Log Cards.

Please confirm compliance with this ASB/SB:

QR-Code or hypertext link NOTE The recording of compliance with SBs in the R-Tex tool does not replace the recording in the helicopter documents https://www.airbushelicopters.com/techpub/rtex/ZcUNgvV

3.D OPERATING AND MAINTENANCE INSTRUCTIONS None.

4 APPENDIX Safran Aerosystems Service Bulletin No. 025-69-18 Rev.1.

Revision 1, 2020-02-12 PAGE 11 of 11 This document is available on the internet: www.airbushelicopters.com/techpub/

No text on this page: it may be a figure. Open the PDF to see it.