On this page
Text · 8
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-1106, the docket of AD 2025-20-06. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '39bafbbde31712598c1b155bcef98461803a5968b5b1bfba7b9095b48392ccce' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '39bafbbde31712598c1b155bcef98461803a5968b5b1bfba7b9095b48392ccce' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SB MBB-BK117 D-2-21-016 PAGE 1 of 8Revision 0, 2021-07−27
This document is available on the internet: www.airbushelicopters.com/techpub/ Valid for Version(s): D-2, D-2m.
SERVICE BULLETIN
PROTECTIVE MEASURE AIR CONDITIONING - Cooling System Temporary replacement of the condenser outlet grid Revision No. Date of issue Revision 0 2021‐07-27 Summary:
With this Service Bulletin (SB), Airbus Helicopters offers the temporary replacement of the condenser outlet grid from the exhaust cowlings by condensor outlet covers.
Compliance:
Airbus Helicopters recommends to comply with this SB.
SB MBB-BK117 D-2-21-016 PAGE 2 of 8
Revision 0, 2021-07−27 This document is available on the internet: www.airbushelicopters.com/techpub/ 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) MBB‐BK117 D-2, D-2m, all S/N with optional equipment Air Conditioning System (ACS).
b) Condenser outlet grid LH P/N D211M1821302 Condenser outlet grid RH P/N D211M1822302
PRE SB POST SB A View A View A A Condenser outlet grid LH D211M1821302 RH D211M1822302 Condenser outlet cover LH D211M1821402 RH D211M1822402
1.A.2 Non-installed equipment and parts Not affected.
1.B ASSOCIATED REQUIREMENTS None.
1.C REASON During test flights it has been detected that the current design of the ACS condenser outlet grid has an effect on the performance of the static ports in dedicated flight conditions. With this SB the condenser outlet grid are temporarily replaced by condenser outlet covers. This replacement decreases the ACS performance by approximately 15 %.
1.D DESCRIPTION Remove the condenser outlet grid. Install the condenser outlet covers.
SB MBB-BK117 D-2-21-016 PAGE 3 of 8Revision 0, 2021-07−27
This document is available on the internet: www.airbushelicopters.com/techpub/
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Not affected.
1.E.2 Compliance in service Helicopters/installed equipment and parts:
Airbus Helicopters recommends to comply with Section 3.B of this SB during one of the next maintenance inspections in relation to your operational availabilities/constraints.
Non-installed equipment and parts:
Not affected.
1.F APPROVAL Approval of modification(s):
The information or instructions contained in this document refer to change no. 7109.
The change is approved under the authority of DOA No. EASA.21J.700.
1.G MANPOWER Qualification Mechanic Electrician Pilot Others Estimated Man‐hours approx. 20 h - - -
1.H WEIGHT AND BALANCE Not changed.
1.I POWER CONSUMPTION None.
1.J SOFTWARE UPGRADES/UPDATES Not changed.
1.K REFERENCES IN 3643-I-00 : Introduction of the digital Service Bulletin reporting service R-TEX IN 3481-I-00 : The Marketplace: an AirbusWorld eOrdering service AMM, MTC, SRM.
SB MBB-BK117 D-2-21-016 PAGE 4 of 8
Revision 0, 2021-07−27 This document is available on the internet: www.airbushelicopters.com/techpub/
1.L OTHER AFFECTED PUBLICATIONS Publications to be updated:
The changes to AMM and IPC which are necessary as a result of this SB will be incorporated with one of the next revisions.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
PRE MOD and POST MOD components are interchangeable.
Mixability:
Do not use PRE MOD and POST MOD components together.
SB MBB-BK117 D-2-21-016 PAGE 5 of 8Revision 0, 2021-07−27
This document is available on the internet: www.airbushelicopters.com/techpub/ 2 MATERIAL INFORMATION
2.A MATERIAL: PRICE ‐ AVAILABILITY ‐ PROCUREMENT Information on price and availability of necessary material kit SB-117D2-21-016-2C will be provided by Airbus Helicopters, Dept. Spares Order Administration on request.
2.B LOGISTIC INFORMATION None.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Material kits to be ordered for one helicopter or one assembly:
Material kit SB-117D2-21-016-2C in accordance with design document D211M5001887.
No. Keyword Qty New P/N Old P/N Rem.
1 Condenser outlet cover LH 1 D211M1821402 - - Condenser outlet grid LH 1 - D211M1821302 A 2 Condenser outlet cover RH 1 D211M1822402 - - Condenser outlet grid RH 1 - D211M1822302 A 3 Blind rivet 48 MBBN3012M3203 - - 48 - MBBN3012M3203 A Remark:
A = Airbus Helicopters does not take back parts with old part numbers.
Consumables to be ordered separately:
WARNING
RESPECT THE SAFETY DATA SHEET OF THE MANUFACTURER.
No. Keyword Qty.(approx.) Specification(if not otherwise stated, refer to AMM 01-00-00, 2-1) CM Rem.
1 Paint as needed - 421 - 2 Sealing compound as needed - 6056 - The consumables can be ordered from the AirbusWorld Marketplace through e-ordering (see IN 3481-I-00 for instructions).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
2.D MATERIAL TO BE RETURNED None.
SB MBB-BK117 D-2-21-016 PAGE 6 of 8
Revision 0, 2021-07−27 This document is available on the internet: www.airbushelicopters.com/techpub/ 3 ACCOMPLISHMENT INSTRUCTIONS
3.A GENERAL
1. Obey the “General recommendations for working at helicopters” (AMM 00-10-02, 2-1).
2. Only the procedure for the left side is given. Do the same procedure for the right side.
3.B WORK STEPS
3.B.1 Replacement of the condenser outlet grid by condenser outlet covers EFFECTIVITY All helicopters with ACS.
NOTE The procedures to install the condenser outlet cover LH and the condenser outlet cover RH are the same. The procedure that follows gives the installation procedure of the condenser outlet cover LH.
1. Remove the condenser outlet grid LH (1, Fig. 1) (AMM 71-15-00, 4-2).
2. Install the condenser outlet cover LH (5):
a. Clean the exhaust cowling assy LH (2) in the area where the condenser outlet grid LH (1) was installed (MTC 20-04-01-102).
b. Put the condenser outlet cover LH (5) into position on the exhaust cowling assy LH (2).
c. Use a drill bit with a diameter of 3.3 mm to transfer the boreholes from the exhaust cowling assy LH (2) to the condenser outlet cover LH (5).
d. Remove the condenser outlet cover LH (5) from the exhaust cowling assy LH (2).
e. Clean the exhaust cowling assy LH (2) and the condenser outlet cover LH (5) (MTC 20-05-01-101).
f. Apply sealing compound (CM 6056) on the mating surface of the condenser outlet cover LH (5) with the exhaust cowling assy LH (2) (MTC 20-05-01-102).
g. Apply sealing compound (CM 6056) on the new blind rivets (6) (MTC 20-05-01-102).
h. Install the condenser outlet cover LH (5) on the exhaust cowling assy LH (2) with the new blind rivets (6) (SRM 51-00-00, 8-2).
i. Remove the unwanted sealing compound (CM 6056) with a lint-free cloth.
j. If necessary, paint the condenser outlet cover LH (5) in accordance with the color scheme of your helicopter.
k. Clean the area where the exhaust cowling assy LH (2) will be identified with the SB number (MTC 20-04-01-102).
l. Use a permanent marker to identify the exhaust cowling assy LH (2) close to its P/N with the SB number “SB MBB-BK117 D-2-21-016“.
m. Protect the SB number “SB MBB-BK117 D-2-21-016“ with paint (CM 421).
3. If removed, install the exhaust cowling assy LH (2) (AMM 71-15-00, 4-1).
SB MBB-BK117 D-2-21-016 PAGE 7 of 8Revision 0, 2021-07−27
This document is available on the internet: www.airbushelicopters.com/techpub/ Replacement of the condenser outlet grid by a condenser outlet cover Figure 1 1 Condenser outlet grid LH D211M1821302 RH D211M1822302 2 Exhaust cowling assy LH 3 Blind rivet 4 Exhaust cowling assy RH 5 Condenser outlet cover LH D211M1821402 RH D211M1822402 6 Blind rivet MBBN3012M3203 View A Pre SB View A Post SB View B Pre SB B 1 3 X24 2 5 6 X24 2 View C Post SB C Install with sealing compound (CM 6056).
2 2 4 4 A
SB MBB-BK117 D-2-21-016 PAGE 8 of 8
Revision 0, 2021-07−27 This document is available on the internet: www.airbushelicopters.com/techpub/
3.C COMPLIANCE CONFIRMATION Compliance with this document:
NOTE If the exhaust cowling assy LH or RH is replaced by a new one, Airbus Helicopters recommends to comply with this SB again.
Record full compliance with this SB, with the revision number, in the helicopter documents.
Record full compliance with this SB, with the revision number, in the log card of the equipment (if a log card exists).
Record the full compliance with this SB (see IN 3643-I-00 for instructions):
QR-Code or hypertext link SB MBB-BK117 D-2‐21‐016 Identification of modifications on equipment or parts:
Identify the part with the SB number.
Keyword Old P/N New P/N MOD Marking Type Exhaust cowling assy LH - - SB MBB-BK117D-2-21-016 Permanentmarker Exhaust cowling assy RH - - SB MBB-BK117D-2-21-016 Permanentmarker
3.D OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:
After accomplishment of this SB, the pilots must be informed on its content and their attention must be drawn to the fact that the ACS performance is decreased by approximately 15 %.
Maintenance instructions:
None.
4 APPENDIX None.
NOTE The recording of compliance with SBs in the R-Tex tool does not replace the recording in the helicopter documents.