On this page
Text · 10OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0265, the docket of AD 2021-12-16. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1771840667138285c38e23fe9ae2fc095912e18d54af0051eec9b353ead63872' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1771840667138285c38e23fe9ae2fc095912e18d54af0051eec9b353ead63872' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 Valid for Version(s): D-2, D-2m.
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE ROTOR FLIGHT CONTROL - Main Rotor Actuator Visual Inspection of the main rotor actuator For the attention of Revision No. Date of issue Revision O 2020-07-07 Summary:
Airbus Helicopters was informed about a cracked nut on the piston of a main rotor actuator (MRA) and with ASB MBB-BK117 D-2-67A-008 a one time visual inspection had been prescribed to check the status of the fleet.
With the current Alert Service Bulletin (ASB), Airbus Helicopters prescribes a repetitive visual inspection every 12 months and the replacement if necessary. Furthermore it describes instructions for all operators who have not checked the MRA nut within the last 12 months.
Compliance:
Compliance with this ASB is mandatory (with EASA AD).
ASB MBB-BK117 D-2-67A-015 Revision 0, 2020-07-07 PAGE 1 of 10 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) MBB-BK117 D-2, D-2m, all S/N.
b) Main rotor actuator, all P/N, all S/N.
Nut
1.A.2 Non-installed equipment and parts Main rotor actuator P/N D673M30A1003, all S/N Longitudinal axis P/N D673M30A1102, all S/N Collective axis P/N B673M30A1203, all S/N Lateral axis P/N B673M30A1301, all S/N
1.B ASSOCIATED REQUIREMENTS None.
1.C REASON Airbus Helicopters was informed of increased control forces in the collective axis in flight. The post flight inspection revealed that a nut on the piston of the MRA had cracked and was displaced.
As a corrective measure a repetitive inspection of the nuts on the pistons of the MRA is introduced with this ASB. In addition, instructions for the MRA already in-service are defined.
1.D DESCRIPTION Visual inspection of the nuts on the pistons of the MRA for cracks, damage, black coloring and corrosion.
PAGE 2 of 10 Revision 0, 2020-07-07 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Inspect the MRA with more than O Fh (TSN/TSO/TSI-ASB MBB-BK117 D-2-67A-008) in accordance with Section 3.B.2 before delivery but within the next 3 months after receipt of this ASB at the latest.
1.E.2 Compliance in service Helicopters/installed equipment and parts:
PART I MRA with 0 to 12 months (TSN/TSO/TSI*) - Inspection * according ASB MBB-BK117 D-2-67A-008 Inspect the MRA in accordance with Section 3.B at 12 months (+3 months tolerance).
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback from Airbus Helicopters before the next flight with the affected MRA.
PART I MRA with more than 12 months (TSN/TSO/TSI*) - Inspection * according ASB MBB-BK117 D-2-67A-008 Inspect the MRA in accordance with Section 3.B within the next 3 months after receipt of this ASB.
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback from Airbus Helicopters before the next flight with the affected MRA.
PART III All MRA - Repetitive Inspection Do a repetitive Inspection of the MRA in accordance with Section 3.B every 12 months (+3 months tolerance).
In case of findings (Nuts - NOT OK) report to Airbus Helicopters and wait for feedback from Airbus Helicopters before the next flight with the affected MRA.
Non-installed equipment and parts:
Inspect MRA with more than 0 Fh (TSN/TSO/TSI-ASB MBB-BK117 D-2-67A-008) in accordance with Section 3.B.2 before installation in the helicopter but within the next 3 months after receipt of this ASB at the latest.
1.F APPROVAL Approval of this document:
The technical content of this document is approved under the authority of DOA No. EASA.21J.700.
Revision 0, 2020-07-07 PAGE 3 of 10 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015
1.G MANPOWER Qualification Mechanic Electrician Pilot Others Estimated Man-hours approx. 1 h
1.H WEIGHT AND BALANCE No effect on weight and balance.
1.J POWER CONSUMPTION Not affected.
1.J SOFTWARE UPGRADES/UPDATES Not changed.
1.K REFERENCES AMM MBB-BK117 D-2 PAGE 4 of 10 Revision 0, 2020-07-07 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015
1.L OTHER AFFECTED PUBLICATIONS Publications already updated:
Not applicable.
Publications to be updated:
ALS MBB-BK117 D-2.
AMM MBB-BK117 D-2.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2020-07-07 PAGE 5 of 10 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 2 MATERIAL INFORMATION
2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT None.
2.B LOGISTIC INFORMATION None.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT None.
2.D MATERIAL TO BE RETURNED None.
PAGE 6 of 10 Revision 0, 2020-07-07 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015
ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Not applicable.
З.В WORK STEPS
3.B.1 Preliminary steps
1. Obey the „General recommendations for Working at helicopter" (AMM 00-10-20, 2-1).
2. Affix a placard in the cockpit which says that the controls must not be moved.
3. Open the crest cowling (AMM 71-11-00, 4-1).
3.B.2 Procedure NOTE The visual inspection requires a flashlight and a mirror. The nuts must not be removed for the inspection.
1. Visualy inspect the nuts (1, Fig. 1) on the pistons of the MRA (2) for cracks, damage, black coloration and corrosion (for condition refer to Figure 2):
a. If there are no findings, no feedback to Airbus Helicopters is necessary, proceed with Section 3.B.3.
b. If there are findings, take a photo of the affected nut and of the MRA and report to Airbus Helicopters with the reply form sheet in the appendix to support.vehicle.ahd@airbus.com. Wait for feedback from Airbus Helicopters before the next flight with the affected MRA.
DETAIL A 1X3 - 1 Nut 2 Main rotor actuator Visual inspection MRA Figure 1 Revision 0, 2020-07-07 PAGE 7 of 10 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 New Nut - OK Used Nut - OK slight dark coloration Used Nut - NOT OK black coloration and corrosion NOTE: Other shape and form of the nut depending on manufacturer is possible.
Conditions of nut Figure 2 PAGE 8 of 10 Revision 0, 2020-07-07 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 З.В.З Final steps
1. Close the crest cowling (AMM 71-11-00, 4-1).
2. Remove the placard in the cockpit.
З.С COMPLIANCE CONFIRMATION Compliance with this document:
Record full compliance with this ASB, with the revision number, in the helicopter documents.
Record full compliance with this ASB, with the revision number, in the log card of the equipment (if a log card exists).
Please confirm compliance with this ASB:
QR-Code or hypertext link NOTE The recording of compliance with ASB in the R-Tex tool does not replace the recording in the helicopter documents ASB MBB-BK117 D-2-67A-015
3.D OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:
None.
Maintenance instructions:
Until incorporation into the ALS and into the AMM the repetitive inspection of the MRA must be repeated in accordance with the measures mentioned in Section 3.B.
4 APPENDIX
4.А Reply form sheet "FINDINGS" Revision 0, 2020-07-07 PAGE 9 of 10 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-2-67A-015 Reply form sheet for ASB "Inspection of MRA"
FINDINGS Nuts - NOT OK Description:
Photo of nut and MRA attached: L Address of operator:
Helicopter S/N:
Helicopter Flight hours (Fh):
Main rotor actuator S/N:
Longitudinal axis S/N: _TSN/TSO:
Lateral axis S/N: TSN/TSO:
Collective axis S/N: TSN/TSO:
Environmental conditions in which the helicopter is operated:
• Salty Desert Urban Mountain
- Others:
Send the filled out reply form sheet to:
Airbus Helicopters Deutschland GmbH Customer Support: e-mail: support.vehicle.ahd@airbus.com Date:_ Signature:
-OR REPLY VIA QR CODE:
PAGE 10 of 10 Revision 0, 2020-07-07 This document is available on the internet: www.airbushelicopters.com/techpub/