On this page
Text · 9OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0630, the docket of AD 2025-18-04. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9ab230b1633a8eac0f79d9f184bee4b229c0c2cb932c9e26db34066745d1936e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '9ab230b1633a8eac0f79d9f184bee4b229c0c2cb932c9e26db34066745d1936e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012 Valid for Version(s): D-3, D-3m.
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE OPTIONAL EQUIPMENT - Rescue Hoist System Determination/Recalculation of performed hoist cycles of the hoist boom assembly For the attention of Revision No. Date of issue Revision 0 2023-01-31 Summary:
This Alert Service Bulletin (ASB) describes a determination/recalculation of the performed hoist cycles of the hoist boom assembly and an applicable transition period.
Compliance:
It is mandatory to comply with this ASB.
Revision 0, 2023-01-31 PAGE 1 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/ installed equipment and parts
a) MBB-BK117 D-3, D-3m, all S/N that were upgraded from MBB-BK117 D-2 to MBB-BK117 D-3*.
* For all other S/Ns the performed hoist cycles of the hoist boom assembly must be known.
b) Hoist boom assembly P/N 44307-500
1.A.2 Non-installed equipment and parts See Section 1.A.1.b).
1.B ASSOCIATED REQUIREMENTS None.
1.C REASON In consideration of new fatigue calculation for external load a dedicated Service Life Limit (SLL) and an additional Inspection (CHK = Check) criterion of the hoist boom assembly were introduced. This ASB describes a determination/recalculation of the performed hoist cycles of the hoist boom assembly and an applicable transition period.
1.D DESCRIPTION Determine and, if necessary, recalculate the performed hoist cycles of the hoist boom assembly. If necessary, inspect the hoist boom assembly.
PAGE 2 of 9 Revision 0, 2023-01-31 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012
1.E COMPLIANCE
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
Not affected.
1.E.2 Compliance in service Helicopters/installed equipment and parts:
Part I: Determination and, if necessary, recalculation of the performed hoist cycles of the hoist boom assembly Within four weeks after receipt of this ASB determine the performed hoist cycles of the hoist boom assembly in accordance with Section 3.B.1.
Part II: Inspection of the hoist boom assembly Definition:
Group 1: Hoist boom assembly with more than or equal to 3330 hoist cycles since manufacturing (Time Since New (TSN)) and without a performed overhaul.
Group 2: Hoist boom assembly with more than or equal to 3330 hoist cycles since the last overhaul (Time Since Overhaul (TSO)).
Group 3: Hoist boom assembly with less than 3330 hoist cycles since manufacturing (TSN) or the last overhaul (TSO).
Compliance:
As transition period within the next 18 months after receipt of this ASB, the following inspection intervals are applicable:
EFFECTIVITY Group 1 and Group 2 The hoist boom assembly must be inspected before the next hoist operation:
- in accordance with Section 3.B.2 and then every 30 hoist cycles of the hoist boom assembly in accordance with Section 3.B.2 until the 18 months after receipt of this ASB have been reached.
or
- in accordance with the ALS.
EFFECTIVITY Group 3 As soon as the 3330 hoist cycles of the hoist boom assembly are reached, the hoist boom assembly must be inspected like Group 1 and Group 2 hoist boom assembly.
EFFECTIVITY All 18 months after receipt of this ASB, the hoist boom assembly must be inspected in accordance with the ALS.
Non-installed equipment and parts:
See Section 1.E.2 - Helicopters/installed equipment and parts.
Revision 0, 2023-01-31 PAGE 3 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012 ASB issued Determine and, if necessary, recalculate the performed hoist cycles of the hoist boom assembly as shown in Section 3.B.1. Obey the SLL in the ALS.
(Within four weeks after receipt of this ASB) 23330 hoist cycles of the No hoist boom assembly since manufacturing Yes Part I (TSN) and without a performed overhaul?
≥ 3330 hoist cycles of the Yes hoist boom assembly since the last overhaul (TSO)?
No (Within 18 months after receipt of this ASB) Before the next hoist operation:
Or The 3330 hoist cycles of the Part II hoist boom assembly are reached within 18 Yes Inspect the hoist boom assembly months after receipt in accordance with Section 3.B.2.
of this ASB?
Within 18 months after receipt of this ASB inspect the hoist boom No assembly every 30 hoist cycles of the hoist boom assembly in accordance with Section 3.B.2.
Inspect the hoist boom assembly in accordance with the ALS.
Flowchart PAGE 4 of 9 Revision 0, 2023-01-31 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012
1.F APPROVAL Approval of this document:
The technical content of this document is approved under the authority of DOA No. EASA.21J.700.
1.G MANPOWER Qualification Mechanic Electrician Pilot Others*
0.5 h (determination/ Estimated recalculation) Man-hours 4 h (inspection, if necessary) * CAMO (or equivalent)
1.H WEIGHT AND BALANCE Not changed.
1.l POWER CONSUMPTION Not affected.
1.J SOFTWARE UPGRADES/UPDATES Not changed.
1.K REFERENCES AMM 00-10-02, 2-1 ALS Revision 001 (2021.12.14) or later approved ALS revisions Goodrich CMM 25-00-50-1 Revision 3 or later revisions validated by Airbus Helicopters (see List Of Applicable Publication (LOAP)/ORION) IN 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L OTHER AFFECTED PUBLICATIONS Not affected.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
Not affected.
Mixability:
Not affected.
Revision 0, 2023-01-31 PAGE 5 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012 2 MATERIAL INFORMATION
2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT None.
2.B LOGISTIC INFORMATION None.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT None.
2.D MATERIAL TO BE RETURNED None.
PAGE 6 of 9 Revision 0, 2023-01-31 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012
ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Obey the "General Recommendations for Working at helicopters" (AMM 00-10-02, 2-1).
З.В WORK STEPS Part I: Determination and, if necessary, recalculation of the performed hoist cycles of the hoist boom assembly
3.В.1 Determination/Recalculation of the performed hoist cycles of the hoist boom assembly NOTE For hoist cycle definition refer to the ALS.
NOTE Hoist boom assembly which has reached the SLL according to the ALS must be removed from service.
1. Determination of the performed hoist cycles of the hoist boom assembly:
a. If the hoist cycles of the hoist boom assembly are known, proceed with Section 3.C to confirm accomplishment of Part I.
b. If the hoist cycles of the hoist boom assembly are unknown, proceed with Section 3.B.1.2.
2. Recalculation of the hoist cycles of the hoist boom assembly depending on the Flight hours (Fh) or TSN:
a. If the Fh of the hoist boom assembly are known:
- Multiply the hoist boom assembly Fh by two and use the result as hoist cycles for the hoist boom assembly.
Example: The affected hoist boom assembly was installed on a helicopter for 60:10 Fh (round up to the next full Fh).
Total: 61 × 2 = 122 hoist cycles for the hoist boom assembly Proceed with Section 3.B.1.3.
b. If the Fh of the hoist boom assembly are unknown:
- Multiply the TSN (months) of the hoist boom assembly with 50 and use the result as hoist cycles for the hoist boom assembly since manufacturing.
Example: TSN of the affected hoist boom assembly is 8 years and 3 months and 10 days (round up to the next full month) (8 x 12 + 4 = 100 months).
Total: 100 (months) x 50 (hoist cycles of the hoist boom assembly/month) = 5000 hoist cycles for the hoist boom assembly since manufacturing Proceed with Section 3.B.1.3.
Revision 0, 2023-01-31 PAGE 7 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012
3. Only if an overhaul was done:
a. If the Fh since the last overhaul (TSO) of the hoist boom assembly are known:
- Multiply the hoist boom assembly Fh since the last overhaul (TSO) by two and use the result as hoist cycles for the hoist boom assembly since the last overhaul (TSO).
Example: The Fh since the last overhaul (TSO) of the affected hoist boom assembly are 09:05 Fh (round up to the next full Fh).
Total: 10 × 2 = 20 hoist cycles for the hoist boom assembly since the last overhaul (TSO) Proceed with Section 3.B.1.4.
b. If the Fh since the last overhaul (TSO) of the hoist boom assembly are unknown:
- Multiply the TSO (in months) of the hoist boom assembly with 50 and use the result as hoist cycles for the hoist boom assembly since the last overhaul (TSO).
Example: The TSO of the affected hoist boom assembly is 11 months and 12 days (round up to the next full month) (11 + 1 = 12 months).
Total: 12 (months) x 50 (hoist cycles of the hoist boom assembly/ month) = 600 hoist cycles for the hoist boom assembly since the last overhaul
- Proceed with Section 3.B.1.4.
4. Use the flowchart in Section 1.E.2 and proceed as shown in the flowchart.
Part II: Inspection of the hoist boom assembly
3.B.2 Inspection of the hoist boom assembly Inspect the hoist boom assembly in accordance with the Goodrich CMM 25-00-50-1 (6 months inspection).
PAGE 8 of 9 Revision 0, 2023-01-31 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 D-3-85A-012 З.С COMPLIANCE CONFIRMATION Compliance with this document:
Part I: Determination and, if necessary, recalculation of the performed hoist cycles of the hoist boom assembly Record compliance with Part I of this ASB, with the revision number, in the helicopter documents.
Record compliance with Part I of this ASB, with the revision number, in the log card of the equipment (if a log card exists).
Part II: Inspection of the hoist boom assembly Record full compliance with this ASB, with the revision number, in the helicopter documents.
Record full compliance with this ASB, with the revision number, in the log card of the equipment (if a log card exists).
Record the full compliance with this ASB (see IN 3785-1-00 for instructions):
QR-Code or hypertext link NOTE The recording of compliance with ASBs in the SB Insight tool does not replace the recording in the helicopter documents.
ASB MBB-BK117 D-3-85A-012
3.D OPERATING AND MAINTENANCE INSTRUCTIONS None.
4 APPENDIX None.
Revision 0, 2023-01-31 PAGE 9 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/