On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 17OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0341; AD 2013-16-19 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ca847c2c5e09a652c9ec59c9995a65dff34ea3d7e8e69972a753d458b577919e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'ca847c2c5e09a652c9ec59c9995a65dff34ea3d7e8e69972a753d458b577919e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026 Civil version: B
ALERT SERVICE BULLETIN SUBJECT: EQUIPMENT AND FURNISHINGS - Emergency floatation gear Protector installation on the rear bracket and the supply couplings For the attention of Revision No. Date of issue Revision 0 2011-07-11 Summary:
During a maintenance operation on the RH emergency floatation gear, a deterioration of the floats has been found. Compliance with the AERAZUR equipment manufacturer Service Bulletin No. 25-69-87 consists in installing protectors on the LH and RH floats of the emergency floatation gear in order to prevent a possible deterioration.
Compliance:
EUROCOPTER renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 1/17 This document is available on the internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment Helicopters with a serial number below or equal to 1632 and fitted with emergency floatation gear P/N:
- RH side (MP/N) 215675-0 or 215675-1 or 215675-2
- LH side (MP/N) 215674-0 or 215674-1 or 215674-2 NOTE Refer to the aircraft individual inspection log book to identify the actual configuration of the helicopter.
1.A.2. Non-installed equipment Emergency flotation gear P/N:
- RH side (MP/N) 215675-0 or 215675-1 or 215675-2
- LH side (MP/N) 215674-0 or 215674-1 or 215674-2
1.B. ASSOCIATED REQUIREMENTS The emergency floatation gears P/N:
- RH side: (MP/N) 215675-0 or 215675-1
- LH side: (MP/N) 215674-0 or 215674-1 must previously be upgraded to (MP/N) 215675-2 and 215674-2 in accordance with paragraphs 2.A. or 2.B.
of the appended AERAZUR equipment manufacturer Service Bulletin 25-69-87.
1.C. REASON During complete overhaul of an emergency floatation gear, the maintenance technicians from the repair station were not able to inflate the RH float in accordance with the instructions given in the Component Maintenance Manual.
The investigations conducted by the repair station have revealed the perforation of one of the compartments of the RH float and several deteriorated areas on the LH and RH floats due to interference with the blunt parts of the bars and the banjo unions.
The perforation of at least one compartment of the LH or RH float may cause the helicopter to tumble during ditching and prevent the complete evacuation of the passengers and the flight crew. Consequently, EUROCOPTER has issued the ALERT SERVICE BULLETIN 05A011 which enabled to check the condition of the emergency floatation gear floats every 300 flying hours. This periodic check has been incorporated in the Maintenance Servicing Manual (MSM).
In order to eliminate interference between the blunt parts of the emergency floatation gear installation and the fabric of the floats, EUROCOPTER renders compliance with the AERAZUR equipment manufacturer Service Bulletin 25-69-87 mandatory, in accordance with this ALERT SERVICE BULLETIN.
Compliance with this ALERT SERVICE BULLETIN 25A026 supersedes the scheduled hour based check according to ALERT SERVICE BULLETIN 05A011.
Revision 0 of this ALERT SERVICE BULLETIN will form the subject of an EASA Airworthiness Directive.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056 Page 2/17 This document is available on the internet: www.eurocopter.com/techpub
• EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN consists in modifying the LH and RH emergency floatation gear assemblies as per paragraph 2 of the AERAZUR equipment manufacturer Service Bulletin No. 25-69-87.
Compliance with this ALERT SERVICE BULLETIN also upgrades all emergency floatation gear assemblies to the latest configuration.
1.E. COMPLIANCE
1.E.1. Compliance at the works Helicopters/installed equipment NOTE 1 Modification approval form FAM No. A00733 is integrated in the new definition of the installation from helicopter serial number 1632.
NOTE 2 This serial number is given for information only, refer to the aircraft individual inspection record (RIC) to identify the actual configuration of the helicopter.
Non-installed equipment Before delivery, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN on the part numbers specified in paragraph 1.A.2.
1.E.2. Compliance in service The operations on the helicopter are to be performed by the operator.
The operations on non-installed equipment are to be performed by the operator or by the supplier according to the configuration of the emergency floatation gear assemblies.
Helicopters/installed equipment Comply with paragraph 3. (except for paragraph 3.B.2.) of this ALERT SERVICE BULLETIN within 300 flying hours or at the latest within 18 months (the first limit reached is applicable) following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page.
Non-installed equipment Comply with paragraph 3.B.2. before installation on the helicopter and according to the requirements, without exceeding 18 months following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the foot of the page.
1.F. APPROVAL Approval of modifications The information or instructions relate to FAM No. A00733 which was approved on February 28, 2011.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 3/17 This document is available on the internet: www.eurocopter.com/techpub
• EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026 Approval of this document The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 08, 2011 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
1.G. MANPOWER EUROCOPTER recommends that compliance with this ALERT SERVICE BULLETIN be ensured by personnel with the following qualification:
Qualification: 1 Mechanical Engineering Technician.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: Approximately 1 hour for a Mechanical Engineering Technician for the removalinstallation of the emergency floatation gear assembly.
For compliance with the AERAZUR equipment manufacturer Service Bulletin No. 25-69-87, refer to paragraph 1.F of the latter.
1.H. WEIGHT AND BALANCE After completion of the work, record the weight and moment values on the PMC.
- Weight: + 0.36 kg
- Moment: Negligible moment deviations.
1.I. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.
1.K. REFERENCES The following documents are necessary for compliance with this ALERT SERVICE BULLETIN.
- AMM: 25-67-00, 3-1: General instructions - Emergency floatation gear
- AMM: 25-67-00, 4-1: Removal / Installation - Emergency floatation gear
1.L. DOCUMENTS AFFECTED EUROCOPTER will incorporate FAM No. A00733 in the following document:
- Illustrated Parts Catalog (IPC) The affected document will be updated as part of a future revision.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 4/17 This document is available on the internet: www.eurocopter.com/techpub
→ EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability Equipment items pre modification and equipment items post modification are not interchangeable.
Mixability Mixability of the emergency floatation gears pre modification:
- RH side (MP/N) 215675-0 or 215675-1 or 215675-2
- LH side (MP/N) 215674-0 or 215674-1 or 215674-2 and emergency floatation gear assemblies post modification (MP/N) 215674-3 and 215675-3 is forbidden on the landing gear assembly between the RH side and the LH side.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 5/17 This document is available on the internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Refer to paragraph 1.G. of the appended AERAZUR equipment manufacturer Service Bulletin No. 25-69-87.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Kits or components to be ordered for one helicopter or one assembly:
Refer to paragraph 1.G. of the appended AERAZUR equipment manufacturer Service Bulletin No. 25-69-87.
New Former Key word Qty Item PIN PIN Instruction 215674-0 or LH emergency floatation gear 215674-3 1 215674-1 or 215674-2 215675-0 or RH emergency floatation gear AIR 215675-3 2 215675-1 or 215675-2 Products to be ordered separately:
Refer to the Tasks and Work Cards referenced in this ALERT SERVICE BULLETIN:
The products can be ordered separately from the INTERTURBINE AVIATION LOGISTICS company.
Website: http://www.interturbine.com Telephone: +49.41.91.809.300 AOG: +49.41.91.809.444
2.D. MATERIAL TO BE RETURNED Not applicable.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 6/17 This document is available on the internet: www.eurocopter.com/techpub
• EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL Read and comply with the General instructions - Emergency floatation gear as per AMM Task 25-67-00, 3-1.
3.B. OPERATIONAL PROCEDURE
3.B.1. Operational procedure on installed equipment (Figure 1) Remove the LH emergency floatation gear assembly (a) and the RH emergency floatation gear assembly
(b) as per AMM Task 25-67-00, 4-1.
Refer to paragraph 2 of the appended AERAZUR equipment manufacturer Service Bulletin No. 25-69-87 in order to modify the emergency floatation gear assemblies.
Install the LH emergency floatation gear assembly (1) and the RH emergency floatation gear assembly (2) as per: AMM Task 25-67-00, 4-1.
3.B.2. Operational procedure on non-installed equipment Refer to paragraph 2 of the appended AERAZUR equipment manufacturer Service Bulletin No. 25-69-87.
3.C. IDENTIFICATION Identification of this document:
Record compliance with this document in the helicopter documents.
Identification of modifications on the equipment Refer to the paragraph Identification (page 8/8) of the appended AERAZUR equipment manufacturer Service Bulletin No. 25-69-87.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 7/17 This document is available on the internet: www.eurocopter.com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026 a Figure 1: Emergency floatation gears Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 8/17 This document is available on the internet: www.eurocopter.com/techpub
→ EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
4. APPENDIX AERAZUR equipment manufacturer Service Bulletin No. 25-69-87 attached as an appendix (08 pages).
Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 9/17 This document is available on the internet: www.eurocopter.com/techpub
→ EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
AERAZUR ZODIAC
AEROSPACE 61 rue Pierre Cure - BP 1 - 78960 PLAISIR CEDEX - France Tel: + 33 1 61 34 23 23 - Fax: + 33 1 61.34.24.23 http://www.zociacaerospace.com CAGE Code: F6101
SERVICE BULLETIN EQUIPEMENT(S):
FLOAT ASSY P/N 215674 (LHS) & P/N 215675 (RHS) SUBJECT :
Protectors' installation onto the rear bracket and supply coupling Date: 14/02/2011 SB 25-69-87 ED 10 Page 1/8 Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 10/17 This document is available on the internet: www.eurocopter.com/techpub
→ EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
AERAZUR ZODIAC
AEROSPACE 61 rue Pierre Curie - BP1 - 78960 PLAISIR CEDEX - France Tel: + 33 1 61 34 23 23 - Fax: + 33 1 61.34.24.23 http://www.zociacaerospace.com CAGE Code: F6101
1. Application data.
A. Applicability L/H Float Gear ARZ P/N: 215674-0 EC P/N: 7050A4256000 L/H Float Gear ARZ P/N : 215674-1 EC P/N: 7050A4256005 UH Float Gear ARZ P/N: 215674-2 EC P/N: 7050A4256007 R/H Float Gear ARZ P/N: 215675-0 EC P/N: 7050A4256001 R/H Float Gear ARZ P/N : 215675-1 EC P/N: 7050A4256006 R/H Float Gear ARZ P/N : 215675-2 EC P/N: 7050A4256008 B. Aim Protect conditioned floats from abrasion induced by metallic parts, supply couplings or rear brackets.
C. Compliance The implementation of this Service Bulletin is recommended.
D. Description
- Upgrade of the LHS & RHS emergency floats gears referenced 215674-0/1 and 215675-0/1 respectively to 215674-2 and 215675-2
- Add protectors onto the rear bracket and all supply couplings.
E. Approval Technical information contained in this manufacturer's Service Bulletin were approved by EUROCOPTER under the prerogatives awarded by the EASA Design Organization Approval N° 21J.056, only for the EUROCOPTER helicopter range concerned.
F. Labour The upgrade of the LHS & RHS emergency floats gears referenced 215674-0/1 and 215675- 0/1 respectively to 215674-2 and 215675-2, prior to this Service Bulletin application, will take 8 hours per float gear.
- 30 minutes per float gear are necessary to apply this Service Bulletin in the frame of a routine inspection (refer to CMM AERAZUR N°25-69-32).
G. Parts, Prices & leadtime In order to apply beforehand the upgrade of the LHS & RHS emergency floats gears prior to this Service Bulletin, in other words, emergency floats gears referenced 215674-0/1 and 215675-0/1 respectively upgraded to 215674-2 and 215675-2, you will first have to contact AERAZUR.
In order to apply this Service Bulletin onto a float gear, protectors mentioned herein below must be purchase to ZODIAC SERVICES Company.
Prices and lead time for parts will be quoted on demand by ZODIAC SERVICES Company at the following coordinates:
Date: 14/03/2011 SB 25-69-87 ED 10 Page 2/8 Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 11/17 This document is available on the internet: www.eurocopte com/techpub
EUROCOPTER AN EADS COMPANY ASB No. EC120-25A026
AERAZUR AEROSPACE ZODIAC 61 rue Pierre Cure - BP 1 - 78960 PLAISIR CEDEX - France Tel: + 33 1 61 34 23 23 - Fax : + 33 1 61.34.24.23 http://www.zociacaerospace.com CAGE Code: F6101 zodiacservices.communication@zodiacaerospace.com Zodiac Services EUROPE: +33 1 64 86 69 69 Zodiac Services US : +1 678 228 8153 Zodiac Services ASIE: +65 6579 2230
AERAZUR AERAZUR AERAZUR AERAZUR Float Gear Rear bracket's Main supply Supply coupling's protector coupling's protector protector P/N Qty P/N Qty P/N Qty P/N 215674-2 1 220865-0 1 220866-0 4 218576-0 215675-2 1 220865-0 1 220866-0 4 218576-0 H. Tools, Prices and Leadtime Not Applicable
1. Weight and Mass Inertia (CGs) Addition of all protectors induces a weight increase of:
- +180g per Float gear, either L/H or R/H.
J. Impact on Electrical consumption None.
K. Applicable Documents / References This Service Bulletin works in relation to the following AERAZUR Equipment Evolution Sheet (FEE):
08018 when considering both P/N 215674 (L/H) & P/N 215675 (R/H) float gears.
L. Other Applicable Documents Modification described within this Service Bulletin will induce the Component Maintenance Manuals (CMM) to rev up:
25-69-32 when considering both P/N 215674 (L/H) & P/N 215675 R/H float gears, M. Modification Cross reference tables Not applicable.
Date: 14/03/2011 SB 25-69-87 ED 10 Page 3/8 Revision 0 2011-07-11 Approved under EASA DOA No. 21J.056. Page 12/17 This document is available on the internet: www.eurocopter.com/techpub