On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 13OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0887, the docket of AD 2022-02-13. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a8112962328368edaf0294b03818984e8473892fc503a1b4d3142be73b2c17e5' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a8112962328368edaf0294b03818984e8473892fc503a1b4d3142be73b2c17e5' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC120-53A017 Civil version(s): B
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE FUSELAGE - Rear Fuselage Corrosion on the tail boom For the attention of Revision No. Date of issue Revision 0 2020-09-14 Revision 1 2020-11-26 Summary:
The purpose of this ALERT SERVICE BULLETIN is to perform a check for corrosion and cracks at the VHF (Very High Frequency) antenna attachments on the tail boom.
Reason for the last revision:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to provide a repair solution introduced through Service Bulletin No. 53-018 (see paragraph 3.B.2.b.), which must be complied with if corrosion and/or cracks are found at the VHF antenna attachments on the tail boom.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory, except for paragraph 3.D.
ASB EC120-53A017 Revision 0 2020-09-14 Page 1/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts On all EC 120 helicopters.
1.A.2. Non-installed equipment or parts Tail booms, all Part Numbers.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Revision 0:
Corrosion was found on the external tail boom skin, under the VHF antenna (Figure 1).
This galvanic type corrosion is due to:
- a contact between the aluminium skin and the stainless steel antenna attachment inserts,
- the protection which is not sufficient.
Corrosion propagation cannot be detected without removing the VHF antenna and requires thorough inspection.
If this corrosion is not detected, the tail boom can undergo to buckling during severe landing.
Consequently, Airbus Helicopters makes it mandatory to check the previously specified areas for corrosion.
Revision 1:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to provide a repair solution introduced through Service Bulletin No. 53-018 (see paragraph 3.B.2.b.), which must be complied with if corrosion and/or cracks are found at the VHF antenna attachments on the tail boom.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with revision 0 of this ALERT SERVICE BULLETIN except for the helicopters on which corrosion and/or cracks were found during compliance with revision 0 of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN consists in:
- removing the VHF antenna,
- making sure that there is no corrosion or crack under the VHF antenna,
- interpreting the results:
. if there is no corrosion and no crack, during reinstallation of the VHF antenna, embodying modification C008A0345050,
• if there is corrosion and/or crack, complying with Service Bulletin No. 53-018 (Repair at the tail boom VHF attachment).
Revision 0 2020-09-14 Page 2/13 Revision 1 2020-11-26 This document is available on the Internet: www.airb elicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service Helicopters/installed equipment or parts:
The work must be performed on the helicopter by the operator.
Comply with paragraph 3. of this ALERT SERVICE BULLETIN within 6 months from receipt of revision 0 of this ALERT SERVICE BULLETIN issued on the date indicated in the page footer.
Non-installed equipment or parts:
Before installing the tail boom identified in paragraph 1.A.2. of this ALERT SERVICE BULLETIN, check stocks and modify when applicable as per paragraph 3.B.2.
1.F. APPROVAL Approval of modifications:
The information or instructions relate to modification C008A0345050, which was approved on September 10, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on September 11, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on November 25, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualification:
Qualification: 1 Airframe Technician.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.
Estimated Man-hours: 4 hours for the Airframe Technician for the inspection and the application of the MOD C008A0345050.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.
Helicopter downtime is estimated at one half-day.
Revision 0 2020-09-14 Page 3/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
1.H. WEIGHT AND BALANCE There is no change in weight and moment.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Standard Practices Manual:
MTC: 20-02-05-404: Assembly by screws and nuts - Joining MTC: 20-02-07-407: Use of conductive paste CHO-LUB E117 - Electrical bonding MTC: 20-04-01-102: Use of cleaning products on individual parts and on aircraft - Cleaning MTC: 20-04-02-401: Chemical stripping of organic surface finishes - Stripping MTC: 20-04-04-403: Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment before painting MTC: 20-05-01-222: Application of PR 1771 B2 sealant - General sealing procedures MTC: 20-05-01-223: Use of Sealing compounds sealing 1776 B2 / 1776 S - General sealing procedures MTC: 20-05-01-401: Use of THIXOFLEX and SLG products - General sealing procedures MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions.
MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft MTC: 20-90-01-106: Pitting corrosion - General information on corrosion MTC: 20-90-03-102: Visual inspection - Corrosion detection Aircraft Maintenance Manual:
AMM: 23-13-02,4-1: Removal / Installation - Antenna on Tail Boom AMM: 23-13-02,5-1: Functional Tests - KY 196A VHF/AM System Information Notice:
IN: 3447-1-00: Introduction of the digital Service Bulletin reporting service R-TEX Service Bulletin:
Service Bulletin No. 53-018 Repair at the tail boom VHF attachment Revision 0 2020-09-14 Page 4/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
TO COMPLY WITH THIS ALERT SERVICE
BULLETIN, THE OPERATOR MUST MAKE SURE
THAT ALL THE MAINTENANCE DOCUMENTS
REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF NOT, IT IS
THE OPERATOR'S RESPONSIBILITY
OBTAIN THE DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.
The modification will be integrated into the:
- Illustrated Parts Catalog (IPC),
- Aircraft Maintenance Manual (AMM),
- Master servicing Manual (MSM).
The MSM and the AMM will be updated during a future revision.
Revision of the IPC document will be updated on the customer's order.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2020-09-14 Page 5/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information on the price of modification kits and/or components, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.
Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to modify.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION Not applicable.
Revision 0 2020-09-14 Page 6/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:
Old Key Word Qty New P/N Item P/N Instruction Screw 22256BC050012L Consumables to be ordered separately:
As per Work Cards indicated in this ALERT SERVICE BULLETIN and the list below:
Key Word Qty P/N Item Conductive past ECS2241.20 132 Sealing compound ECS2339.60 6068 Sealing compound ECS2253.10 6267 Sealing compound ECS2068.10 6240 Cleaning agent A R ECA 3061.10 2996 6 Chemical transformation agent AR ECS2338.10 316 7 The consumables can be ordered separately from the following companies:
Aviatec Global Aviation Website address: www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193.8803.630 Fax: +33 1.34.46.45.26 or +49 4193.8803.699 AOG: +49 4193.8803.660 AOG e-mail: aog@aviatec.aero BDSI Website address: www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG e-mail: AOGdesk@Boeingdist com Gaches Chimie Website address: www.gaches.com Telephone: +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG e-mail: marketplace@gaches.com
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2020-09-14 Page 7/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- As per Work Card 20-02-05-404 (MTC), read and comply with the instructions concerning assembling by screws and nuts.
- As per Work Card 20-04-01-102 (MTC), read and comply with the instructions for the use of cleaning products on individual parts and on aircraft.
- As per Work Card 20-90-03-102 (MTC), read and comply with the instructions for corrosion visual inspection.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies as per Work Card 20-07-03-406 (MTC).
- Install the access equipment.
3.B.2. Procedure (Figures 1 and 2)
3.B.2.a. Check for corrosion under the VHF antenna base support
- Remove the VHF antenna (a) as per Task 23-13-02,4-1 (AMM).
- Discard the screws (c).
- Make sure that there is no aluminum oxide (white powder) on the skin area (b) and on the screw holes (d).
- Clean the skin area (b) using the cleaning agent (6).
- Make sure that there is no pitting corrosion on the skin area (b), on the screw holes (d) and on the edge (e) of the screw holes (d) located between the skin area (b) and the insert (f) (see Figure 2, SECTION D-D) as per Work Card 20-90-01-106 (MTC).
- Make sure that there are no crack on the skin area (b) and on the screw holes (d).
- Interpret the results as per paragraph 3.B.2.b.
3.B.2.b. Interpretation of the results
- If there is no corrosion and no crack:
. comply with paragraph 3.B.2.c.
- If there is corrosion and/or crack:
. comply with Service Bulletin No. 53-018.
3.B.2.c. Embodiment of MOD C008A0345050
- Strip the skin area (b) as per Work Card 20-04-02-401 (MTC).
- Touch up the area (b) using chemical transformation agent (7) as per Work Card 20-04-04-403 (MTC).
- Apply conductive past (2) on the area (b) as per Work Card 20-02-07-407 (MTC).
- Connect the coaxial connector (g).
- Apply sealing compound (4) around the coaxial connector (g) as per Work Card 20-05-01-401 (MTC).
- Install the VHF antenna (a) using screws (1).
- Tighten the screws (1) to the standard torque.
- Apply a bead of sealant (3) around the antenna (a) as per Work Card 20-05-01-222 (MTC).
- Apply sealing compound (5) on the screw heads (1) as per Work Card 20-05-01-223 (MTC).
Revision 0 2020-09-14 Page 8/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
3.B.3. Tests
- Set the helicopter to test condition.
- Perform a functional test as per Task 23-13-02,5-1 (AMM).
3.B.4. Final steps
- Perform an aspect check on the helicopter after inspection or repair as per Work Card 20-07-03-408 (MTC).
- Connect all the electrical power supplies as per Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
3.C. RECORD OF COMPLIANCE Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.
Please confirm compliance with this ALERT SERVICE BULLETIN as per Information Notice No. 3447-1-00:
QR-Code or hypertext link NOTE The recording of compliance with ALERT SERVICE BULLETINS in the R-Tex tool does not replace the recording in the helicopter documents.
ASB EC120-53A017 Tracking of modifications in the documentation:
Record full embodiment of modification C008A0345050 in the helicopter documents.
Identification of modifications on equipment or parts:
Record the embodiment of modification C008A0345050 on the tail boom identification plate (or on the internal skin near the identification plate) using indelible ink as per Work Card 20-08-05-103 (MTC).
Revision 0 2020-09-14 Page 9/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbush helicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:
Not applicable.
Maintenance instructions:
1) For helicopters operating in normal atmospheric conditions:
Comply with paragraph 3. of this ALERT SERVICE BULLETIN at intervals not exceeding 24 months and 73 days.
2) For helicopters operating in tropical and humid or salt-laden atmospheric conditions:
Comply with paragraph 3. of this ALERT SERVICE BULLETIN at intervals not exceeding 12 months and 36 days.
3) At each removal/installation of the VHF antenna, comply with paragraph 3. of this ALERT SERVICE BULLETIN.
The Master Servicing Manual (MSM) and the Aircraft Maintenance Manual (AMM) will integrate these instructions during a future revision.
Following integration of these instructions in the MSM and the AMM, refer to these manuals.
Revision 0 2020-09-14 Page 10/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017 Example of corrosion and aluminium oxide Example of corrosion and aluminium oxide Return to paragraph 1.C Figure 1 Revision 0 2020-09-14 Page 11/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC120-53A017
PAGE LEFT BLANK INTENTIONALLY Revision 0 2020-09-14 Page 12/13 Revision 1 2020-11-26 This document is available on the Internet: www.airbushelicopters.com/techpub/