On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 17
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0398; AD 2013-18-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'daed447cc76ba18842323beb30af85c6121fc3116228d31f8805727785337c01' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'daed447cc76ba18842323beb30af85c6121fc3116228d31f8805727785337c01' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
SERVICE BULLETIN EC135 CHANGE INSTRUCTION NO. 2 FOR EC135-26A-003 PAGE1of12011-12-19 Date: First issue: 2011-03-24 Revision01: 2011-05-16 Revision02: 2011-12-19 Please replace Revision 01 of Alert Service Bulletin EC135-26A-003 with Revision 02.
Revision02 distinguishes for the retrofit of helicopters with double fire extinguishing system, whetheranairconditioningsystemisinstalledornot.
Onhelicopterswithdoublefireextinguishingsystemandairconditioning,Revision02mustbe accomplishedbyJune30,2012atthe latest.All otherhelicopters -- including helicopterswith double fire extinguishing system but without airconditioning system -- are not affected by the measuresgiveninthisRevision.
No text on this page: it may be a figure. Open the PDF to see it.
ALERT SERVICE BULLETIN EC135 EC135-26A-003 PAGE 1 of 15 2011-03-24 REVISION 02, 2011-12-19 Fire Protection System - - Engine Fire Extinguishing System - - Retrofit of heat-resistant injection tubes
1. Planning Information A. Effectivity
(1) Helicopters affected: EC135/EC635, all models, S/N 0005 up to and including S/N 0869, equipped with Single engine fire ex tinguishing system Tkz. L262M1808101 )a, L262M1812101 )b and L262M1812102)c.
Installed only on helicopters of the BPOL:
Double engine fire exti nguishing system L262M1813102)d.
)a as part of L262M1802051.
)b as part of L262M1802052 or L262M1802053.
)c as part of L262M1802053V001.
)d as part of L262M1804052 or L262M1804052V001.
(2) Components affected: For single engine fire extingui shing system:
RH tube L262M1810101 LH tube L262M1811801 / L262M1809101 For double engine fire ex tinguishing system:
RH tube L262M1814101 RH tube L262M1808212 LH tube elbow L262M1815206 LH tube L262M1808211.
(3) Spare Parts affected: See 1.A.(2).
B. Concurrent Requirements Not applicable.
C. Reason If the engines catch fire the fire extinguisher injection tubes might deform due to local heat which possibly impairs the fire extinguishing substance feed-through.
With this Alert Service Bulletin ECD therefore describes the retrofit/modification of more heat-resistant injection tubes which comply with the current regulations.
D. Description Remove and modify the injection tubes. Re-install the injection tubes.
This document is available on the internet: www.eurocopter.com/techpub
ALERT SERVICE BULLETIN EC135 EC135-26A-003 PAGE 2 of 15 REVISION 02, 2011-12-19 2011-03-24 E. Compliance
(1) The measures described in this Alert Service Bulletin must be accomplished by March 31, 2012.
(2) The measures for the double engine fire extinguishing system must be accomplished on helicopters without air conditioning i.a.w. Alert Service Bulletins by December 31, 2011 at the latest.
(3) The measures for the double engine fire extinguishing system must be accomplished on helicopters with air conditioning i.a.w. this Alert Service Bulletin by June 30, 2012 at the latest.
(4) Stored spare parts must be modified i.a.w. Section 3. of this Alert Service Bulletin before they are installed on the helicopter.
F . Approval The information or instructions contained in this document refer to change no. 1555. The technical content of this document is approved under the authority of DOA No.
EASA.21J.034.
G. Manpower For installation/removal and modification of the tubes: approx. 4.5 hours.
For installation/removal: Rear structure: approx. 15 hours.
Air conditioning system plate: approx. 20 hours.
H. Weight and Balance Not applicable.
I. Electrical Load Data Not applicable.
J. Software Accomplishment Summary Not applicable.
K. References AMM EC135, AMM EC135/635.
L. Other publications affected The changes to AMM EC135, AMM EC135/635 and to IPC EC135, IPC EC635 which are required as a result of this Alert Service Bulletin will be incorporated with one of the next revisions.
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 3 of 15 2011-03-24 REVISION 02, 2011-12-19 M. Interchangeability ofParts Afterthis Alert Service Bulletin has been accomplished thestandard parts given belowcan be installed:
Single engine fire extinguishing system: -- P/N L262M1811101 (standard) inst ead of modified tubes P/N L262M1809101 and L262M1811801.
-- P/N L262M1810102 (standard) instead of modified tube P/N L262M1810101.
Double engine fire extinguishing system(for HCwithout Air Conditioning System):
-- P/N L262M1814802 (standard) instead of modified tube P/N L262M1814101.
-- P/N L262M1815803 and L262M1815209 (standard) instead of modified tube L262M1815206.
Double engine fire extinguishing system(for HCwith Air Conditioning System):
-- P/N L262M1814802 (standard) instead of modified tube P/N L262M1814101.
-- P/N L262M1815804 and L262M1815209 (standard) instead of modified tube L262M1815206.
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 4 of 15 REVISION 02, 2011-12-19 2011-03-24
2. MaterialInformation A. Material -- Price andAvailability Information on cost and availability of required retrofit k it SB-135-26A-003-2C1, SB-135-26A-003-2C2, SB-135-26A-003-2C3 and SB-135-26A-003-2C44 will be provided by ECD, Dept. Spares Order Administration on request.
B. SupportInformation The material kits required will be delivered by EUROCOPTER free of cost only when the incomingorderisreceivedbyOctober31,2011.Materialkit sorderedafterOctober31,2011 will be charged with the ruling prices.
InformationNoticeIN2372-I-26hasbeenissuedbyEurocopt erasadditionalinformationto retrofit kits SB-135-26A-003-2C1 and SB-135-26A-003-2C2.
C. MaterialNecessary forEachHelicopter EFFECTIVITY S/N 0005 and S/N 0006 for single engine fire extinguishing system.
Retrofit kit SB-135-26A-003-2C1, based on design documentL262M1812103.
No. New P/N Keyword Old P/N Qty Disposition 1 L262M1810802 RHtubeelbow -- 1 A 2 -- RHtube L262M1810101 1 D 3 L262M1811803 LHtubeelbow -- 1 A 4 L262M1811101 LHtube -- 1 A 4 -- LHtube L262M1809101 1 C 5 GBSM21--23/18SKW4 Clamp -- 4 A 5 -- Clamp DIN3017AL16--27W2--1 2 C 6 L262M10X1201 Blankingcap -- 2 A 7 -- PU-lacquer(CM478) -- a.n.* B 8 -- Hardener(CM479) -- a.n.* B 9 -- Thinner(CM480) -- a.n.* B EFFECTIVITY S/N 0007uptoandincludingS/N 0869forsingleenginefireex tinguishing system.
Retrofit kit SB-135-26A-003-2C2, based on design documentL262M1812103.
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 5 of 15 2011-03-24 REVISION 02, 2011-12-19 No. New P/N Keyword Old P/N Qty Disposition 1 L262M1810802 RHtubeelbow -- 1 A 2 -- RHtube L262M1810101 1 D 3 L262M1811803 LHtubeelbow -- 1 A 4 -- LHtube L262M1811801 1 D GBSM21--23/18SKW4 -- 4 A 5 -- Clamp DIN3017--A--16--27X9 --W2--2 or DIN3017AL16--27W2--1 2 C 6 L262M10X1201 Blankingcap -- 2 A 7 -- PU-lacquer(CM478) -- a.n.* B 8 -- Hardener(CM479) -- a.n.* B 9 -- Thinner(CM480) -- a.n.* B EFFECTIVITY S/N 0005 up to and including S/N 0869 for double engine fire extinguishing system for HCwithout Air Conditioning System.
Retrofit kit SB-135-26A-003-2C3, based on design documentL262M1813103.
No. New P/N Keyword Old P/N Qty Disposition 1 L262M1808215 LHtube -- 1 A 1 -- LHtube L262M1808211 1 C 2 L262M1808216 RHtube -- 1 A 2 -- RHtube L262M1808212 1 C 3 L262M1814803 RHtubeelbow -- 1 A 4 -- RHtube L262M1814101 1 D 5 L262M1815803 LHtubeelbow -- 1 A 5 -- LHtubeelbow L262M1815206 1 D 6 GBSM25--27/18SKW4 Clamp -- 5 A 6 -- Clamp DIN3017AL23--35C6--W4 4 C 7 L262M10X1202 Blankingcap -- 2 A 8 -- PU-lacquer(CM478) -- a.n.* B
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 6 of 15 REVISION 02, 2011-12-19 2011-03-24 No. DispositionQtyOld P/NKeywordNew P/N 9 -- Hardener(CM479) -- a.n.* B 10 -- Thinner(CM480) -- a.n.* B EFFECTIVITY S/N 0005 up to and including S/N 0869 for double engine fire extinguishing system for HCwith Air Conditioning System.
Retrofit kit SB-135-26A-003-2C4, based on design documentL262M1813104.
No. New P/N Keyword Old P/N Qty Disposition 1 L262M1808215 LHtube -- 1 A 1 -- LHtube L262M1808211 1 C 2 L262M1808216 RHtube -- 1 A 2 -- RHtube L262M1808212 1 C 3 L262M1814803 RHtubeelbow -- 1 A 4 -- RHtube L262M1814101 1 D 5 L262M1815804 LHtubeelbow -- 1 A 5 -- LHtubeelbow L262M1815206 1 D 6 GBSM25--27/18SKW4 Clamp -- 5 A 6 -- Clamp DIN3017AL23--35C6--W4 4 C 7 L262M10X1202 Blankingcap -- 2 A 8 -- PU-lacquer(CM478) -- a.n.* B 9 -- Hardener(CM479) -- a.n.* B 10 -- Thinner(CM480) -- a.n.* B *a.n.=asneeded Disposition:
A = New, included in kit.
B = Consumable material, to be ordered from the Interturbinecompany as needed.
CM item number i.a.w. list of consumable materials in the AMM.
C = Part with old P/N is discarded.
Discarded parts are not taken back by ECD.
D = Remove the old P/N from the helicopter. Modify and re-identify it i.a.w E.
D. MaterialNecessary forEachSpare
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 7 of 15 2011-03-24 REVISION 02, 2011-12-19 Not applicable.
E. ReidentifiedParts Using a vibrograph, write the new part numbers given below next to the old part numbers when this Alert Service Bulletin is accomplished:
Component OldP/N NewP/N LH tube L262M1811801 L262M1811101 Tube (9, Figure 3) L262M1815209 RH tube L262M1810101 L262M1810102 RH tube L262M1814101 L262M1814802 F. SpecialTooling Not applicable.
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 8 of 15 REVISION 02, 2011-12-19 2011-03-24
3. Accomplishmentinstructions A. Preliminary Work Steps:
NOTE As the plate of the airconditioning system blocks the accessto the LH injectiontubeit,isrequiredtoeitherremovetheplateort oremovetherear structure.
(1) If an airconditioning system is installed on the helicopter,either
(a) completely remove the plate i.a.w. AMM, 21-51-00, 4-1.
or
(b) remove the rear structure i.a.w. AMM, 53-50-00, 4-1.
If necessary remove the aft firewall i.a.w. AMM, 71-32-00, 4-3.
If necessary remove the airconditioning system from the eng ine deck i.a.w.
Figure 5.
(2) If the rear structure is not removed i.a.w. (1)(b): remove battery i.a.w. AMM, 24-30-00,
1-1.
(3) Mark the position of the cutting edges on the installed injection tubes i.a.w. Figure 2 / Figure 4.
(4) Remove the injection tubes i.a.w. AMM, 26-21-01, 4-3. If the rear structure was removed [see (1)(b)] it might be better to additionally saw apart the LH injection tube in the area of the firewall (, Figure 2 / Figure 4).
B. Retrofit of the single engine fire extinguishing system:
(1) Modify the injection tubes:
EFFECTIVITY S/N 0005 and S/N 0006.
(a) Discard LH (long) injection tube. Saw through RH (short) injection tube i.a.w Figure 2 and discard the marked section ( ). Debur cutting edge of the other section ( ).
EFFECTIVITY S/N 0007 up to and including S/N 0869.
(b) Saw through both injection tubes i.a.w Figure 2 and disca rd the marked sections ( ). Debur cutting edges of the other sections ().
(2) Install the injection tubes:
(a) Installthenewandmodifiedinjectiontubessimilarasg iveninAMM,26-21-01, 4-3.
Differing from the details given in the AMM the following work steps must be accomplished (see Figure 1):
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 9 of 15 2011-03-24 REVISION 02, 2011-12-19 -- Slide clamp (3, Figure 1) onto tube (4) and carefully fit tube elbow (2) and tube (4) into one another ().
-- Slide clamp (3, Figure 1) onto tube (5) and carefully fit tube elbow (6) and tube (5) into one another ().
-- Connect tubes and tube elbows using clamp (3, Figure 1). Torque-tighten clamps to 5--6 Nm.
-- Close the tube (7) ends with blanking cap (8).
C. Retrofit of the double engine fire extinguishing system:
NOTE The procedure is effective for helicopters with and for helicopters without air conditioning system.
(1) Modify the injection tubes i.a.w. Figure 4 and discard the marked sections ( ). Debur the cutting edge of the section to be further used ()
(2) Installthenewandmodifiedinjectiontubessimilarasg iveninAMM,26-21-01, 4-3(see Figure 3):
-- Slide clamp (2) onto tube (8) and carefully fit tube elbow (7) and tube (8) into each other ( ).
-- Slide clamp (2) onto tube (1, 9) and carefully fit tube (1, 9) and tube elbow (3) into each other ( ).
-- Connect tubes and tube elbows with clamp (2). Torque-tighten screws of the clamps to 5--6 Nm.
-- Close the ends of the tubes (4, 6) with the blanking cap (5).
D. Conclusive work:
(1) If was previously removed,either
(a) Re-install plate i.a.w. AMM, 21-51-00, 4-1.
or
(b) Re-attach airconditioning system to the engine deck i.a.w. Figure 5.
Re-install aft firewall i.a.w. AMM, 71-32-00, 4-3.
Re-install rear structure i.a.w. AMM, 53-50-00, 4-1.
(2) If removed re-install the battery i.a.w. AMM, 24-30-00,1-1.
E. Confirm accomplishment of this Alert Service Bulletin byan entry in the historical record of the helicopter.
4. Appendix Not applicable.
ALERTSERVICEBULLETIN EC135 EC135-26A-003 PAGE 10 of 15 REVISION 02, 2011-12-19 2011-03-24 Structuralconfigurationoftheinjectiontubesaftermodi ficationof the singleenginefireextinguishingsystem:
S/N0005 /0006:
Position of clamp ”B” on the engine deck (see Figure 1).Clamp”B” Newtubes Carefully puttubesintoone another.