On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0656; AD 2019-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0317, the docket of AD 2021-09-07. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Emergency Alert Service Bulletin
- Number
- EC135-67A-039
- Latest revision known
- EC135-67A-039, Revision 1, dated April 23, 2019
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 14OCR
Revision 1, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-0656; AD 2019-17-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c6ae877996964ea7561bed073adbf41955653e22002da18eba521728cba29fad' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'c6ae877996964ea7561bed073adbf41955653e22002da18eba521728cba29fad' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS EASB EC135-67A-039 Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3 635 T1, 635 12+, 635 13, 635 P2+, 635 P3
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE ROTOR FLIGHT CONTROL - Main Rotor Actuator Check of the main rotor actuator (single-axis actuators) For the attention of Revision No. Date of issue Revision O 2019-04-08 Revision 1 2019-04-23 Summary:
Airbus Helicopters Deutschland (AHD) was informed about a hard landing, which was later classified as an accident of the helicopter. The investigation revealed a rupture of the tie bar inside the piston of a longitudinal single-axis actuator of a main rotor actuator (MRA), which resulted in a loss of control of the helicopter. With this Emergency Alert Service Bulletin (EASB), AHD prescribes a fleet-wide check and inspection of all individual axis of the MRA.
Reason for last Revision:
Please replace Revision 0 of the ASB with Revision 1 of this EASB.
With Revision 1 the ASB EC135-67A-039 has been classified as an EASB. Furthermore with Revision 1 of this EASB a corrosion inspection of the tie bar of each individual single-axis actuator of the MRA has been added (See PART III).
If PART II of Revision O has already been accomplished, PART III must be accomplished in addition.
Compliance:
Compliance with this EASB is mandatory.
Revision 1, 2019-04-23 PAGE 1 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039 1 PLANNING INFORMATION
1.A EFFECTIVITY
1.A.1 Helicopters/installed equipment and parts
a) EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3, all S/N.
b) Main rotor actuator P/N L673M20A1005 Main rotor actuator P/N L673M30A2011 Main rotor actuator P/N E673M30A2001 Longitudinal single-axis actuator P/N L673M20A1008 Longitudinal single-axis actuator P/N L673M30A2111 Collective single-axis actuator P/N L673M20A1012 Collective single-axis actuator P/N L673M30A1211 Collective single-axis actuator P/N E673M30A1201 Lateral single-axis actuator P/N L673M20A1011 Lateral single-axis actuator P/N L673M30A2311 MRA with single-axis actuators
1.A.2 Non-installed equipment and parts See Section 1.A.1 b).
1.B ASSOCIATED REQUIREMENTS None.
PAGE 2 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
1.C REASON AHD was informed about a hard landing, which was later classified as an accident of the helicopter. The investigation revealed that the tie bar inside the piston of a longitudinal single-axis actuator of a MRA was ruptured and was displaced, which resulted in a loss of control of the helicopter. The cause for the rupturing of the tie bar is still under investigation.
With Revision O as an initial measure the analysis of the in service fleet was introduced with the ASB. Based on the information of Revision O and the received feedback additional measures have been incorporated with Revision 1 and the ASB has been classified to an EASB.
1.D DESCRIPTION Check the aircraft records of all single-axis actuators of the MRA (PART I). Visual inspect the single-axis actuators for external appearance of corrosion (PART II).
Replace affected single-axis actuator by a serviceable part (PART III).
1.E COMPLIANCE Revision 1 of this EASB published PART I: Check date of manufacturer No Revision 0 accomplished?
Date of last overhaul of the MRA Yes No Determine compliance date for PART III No more actions required Date prior 29th March 2013?
(see Table 1) Yes Yes Component age less than 6 years?
PART II: Visual inspect the MRA No No Perform Part III of this External corrosion visible?
EASB Yes Send Picture of corrosion to AHD Confirm accomplishment of Confirm accomplishment of Confirm accomplishment of PARTI PART I and PART II EASB Revision 1, 2019-04-23 PAGE 3 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
1.E.1 Compliance at H/C manufacturer level Helicopters/installed equipment and parts:
Not affected.
Non-installed equipment and parts:
See Section 1.E.2.
1.E.2 Compliance in service Helicopters/installed and non-installed equipment and parts:
Perform PART I and if required PART Il at the latest two weeks after publication of Revision 0 of the ASB (by the 22th of April 2019).
PARTI Review the aircraft records to determine the "Date of manufacture" / "Date of last overhaul" of the single-axis actuators in accordance with Section 3.B.1. Dependent on the result of PART I accomplish PART Il and PART III.
PARTI EFFECTIVITY Actuators not overhauled.
1. Inspect single-axis actuators which have been manufactured prior to or at 29th of March 2013 for external appearance of corrosion (Section 3.B.2).
2. Send reply form sheet to AHD. Add pictures for corroded actuators.
EFFECTIVITY Actuators overhauled.
3. Inspect single-axis actuators which have been overhauled prior to or at 29th of March 2013 for external appearance of corrosion (Section 3.B.2).
4. Send reply form sheet to AHD. Add pictures for corroded actuators.
PART III
1. If the calendar age of a single-axis actuator is equal or greater than 12 years contact your local Airbus Helicopters representative immediately.
2. If the calendar age of a single-axis actuator is less than 12 years contact your local Airbus Helicopters representative at least two weeks before end of the compliance time given in Table 1.
3. Based on the compliance dates given in Table 1 replace the affected single-axis actuator by a serviceable part (Section 3.B.3).
PAGE 4 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039 Calendar age of the Compliance dates are based on the publishing date single-axis actuator* of Revision 1 of this EASB Single-axis actuator with Single-axis actuator with outer Corrosion signs** no corrosion signs (see Figure 1) (see Figure 2) Return the helicopter back to base within 7 14 years or more 2 weeks days or 5 flight cycles, whichever occurs first 12 years or more, but 2 weeks 1 month less than 14 years 10 years or more, but 1 month 3 month less than 12 years 8 years or more, but less 2 month 6 month than 10 years 6 years or more, but less 4 month 12 month than 8 years Less than 6 years No action required No action required * Based on the Date of last overhaul. Only if no overhaul has been done the Date of manufacture can be used. Reference date for the age determination is the 29th of March 2019.
Note: If a repair (NOT Overhaul) of the actuator can be confirmed by Log Card entry of the component, there is a possibility that the tie bar has been replaced. This can only be checked by AH / Liebherr. In case of positive feedback this repair date can then be used for age determination of the actuator.
If the corrosion of external screws can be removed by light polishing, then it is not considered as corroded. If the pitting on screw heads is still visible after polishing then it is considered as corroded.
Table 1
1.F APPROVAL Approval of this document:
The technical content of this document is approved under the authority of DOA No. EASA.21J.700 Revision 1, 2019-04-23 PAGE 5 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
1.G MANPOWER Qualification Mechanic Electrician Pilot Others
PART I / PART II Man-hours Estimated approx. 2 h * Check of "Date of manufacture" / "Date of last overhaul" and taking pictures.
PART III Man-hours Estimated approx. 7 h ** approx. 4-6 h *** ** Removal / installation of the MRA for inspection.
*** Inspection / replacement of the tie bar of each individual single-axis actuator.
1.H WEIGHT AND BALANCE No effect on weight and balance.
1.l POWER CONSUMPTION Not affected.
1.J SOFTWARE UPGRADES/UPDATES Not changed.
1.K REFERENCES AMM EC135, AMM EC135/635.
1.L OTHER AFFECTED PUBLICATIONS Not affected.
1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
Not affected.
Mixability:
Not affected.
PAGE 6 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
MATERIAL INFORMATION
2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT None.
2.B LOGISTIC INFORMATION None.
2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT None.
2.D MATERIAL TO BE RETURNED None.
Revision 1, 2019-04-23 PAGE 7 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Not applicable.
З.В WORK STEPS PART I
3.В.1 Check the "Date of manufacture" / "Date of last overhaul" EFFECTIVITY Actuators not overhauled.
1. Review aircraft records to determine the "Date of manufacture":
- If the date of manufacture is prior to or at 29th of March 2013 do a visual inspection (Section 3.B.2).
- If the date of manufacture is after this date proceed with Section 3.C.
EFFECTIVITY Actuators overhauled.
2. Review aircraft records to determine the "Date of last overhaul":
- If the date of overhaul is prior to or at 29th of March 2013 do a visual inspection (Section 3.B.2).
- If the date of overhaul is after this date proceed with Section 3.C.
PART II
3.B.2 Visual inspection of the single-axis actuators EFFECTIVITY Actuators installed.
1. De-energize the helicopter electrical system (AMM 24-00-00, 2-1).
2. Remove the transmission fairing (AMM 71-11-00, 4-4).
EFFECTIVITY All.
3. Visual inspect the single-axis actuators for external appearance of corrosion (for examples refer to Figures 1 and 2):
a. If no external appearance of corrosion is detected proceed with Section 3.B.4 PART I!.
b. If external appearance of corrosion is detected proceed with step 4.
PAGE 8 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039 NOTE Visual inspection criteria for "external appearance of corrosion" is for determining the PART III compliance requirements and is not subject to corrective measures as detailed in this EASB.
4. Take pictures of the corroded single-axis actuators.
5. Proceed with Section 3.B.4 PART II.
VIEW A Single-axis actuator - examples of external appearance of corrosion parts
• Figure 1 Revision 1, 2019-04-23 PAGE 9 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039 VIEW A
HR TEXTRON
SERVOVALVE Single-axis actuator - examples of external appearance of non-corrosion parts Figure 2 PAGE 10 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
PART III З.В.З Replacement of affected single-axis actuator by a serviceable part EFFECTIVITY Actuators installed.
1. De-energize the helicopter electrical system (AMM 24-00-00, 2-1).
2. Remove the transmission fairing (AMM 71-11-00, 4-4).
3. Remove the MRA (AMM 67-31-00, 4-1).
EFFECTIVITY All.
4. If necessary, remove the affected single-axis actuator from the MRA (AMM 67-31-00, 4-3).
NOTE A serviceable part is a single-axis actuator having a date of manufacture or date of last overhaul after 29 march 2013 (PART I);
or a single-axis actuator which has passed an inspection (no defects found or repaired, as applicable) in accordance with SB EC135-67-040 or SB EC135H-67-012.
5. Replace the affected single-axis actuator by a serviceable part.
NOTE SB EC135-67-040 describes an inspection of the inner part of the single-axis actuator and the replacement of parts, if necessary.
Only personnel that have received an on the job training by Airbus Helicopters with certificate number OJT SB EC-135-67-040 are allowed to perform SB EC135-67-040.
Revision 1, 2019-04-23 PAGE 11 of 14 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS EASB EC135-67A-039
3.B.4 Final steps PARTI EFFECTIVITY Actuators installed.
1. Install the transmission fairing (AMM 71-11-00, 4-4).
EFFECTIVITY All.
NOTE Please use one reply form sheet for each helicopter/non-installed actuator (3 individual axis / 1 MRA assembly).
2. Report to AHD.
a. Fill out the reply form sheet on page 14 and report to AHD support.vehicle.ahd@airbus.com or
b. Use QR code to report to AHD:
PART III If removed, install the inspected single-axis actuator on the MRA (AMM 67-31-00, 4-4).
EFFECTIVITY Actuators installed.
2. Install the MRA on the helicopter (AMM 67-31-00, 4-2).
3. Install the transmission fairing (AMM 71-11-00, 4-4).
PAGE 12 of 14 Revision 1, 2019-04-23 This document is available on the internet: www.airbushelicopters.com/techpub/