Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters EASB EC135-67A-043 Rev 0 · 9 pages · 312 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0519, the docket of AD 2022-10-51. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-0519 (document 0003) · AD 2022-10-51

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC135-67A-043

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 9OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0519, the docket of AD 2022-10-51. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '77d9b205b693936d9db67bca0ece89c59af905a87fb7555889f9ce2ed473a4a4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 Valid for Version(s): T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 12+, 635 13, 635 P2+, 635 P3

EMERGENCY

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE ROTOR FLIGHT CONTROL - Tail Rotor Controls Inspection for Conformity of the Flexball For the attention of Revision No. Date of issue Revision O 2022-04-29 Summary:

With this Emergency Alert Service Bulletin (EASB), Airbus Helicopters introduces a one-time inspection for conformity of the Flexball to replace it if necessary.

Compliance:

It is mandatory to comply with this EASB.

Revision 0, 2022-04-29 PAGE 1 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 1 PLANNING INFORMATION

1.A EFFECTIVITY

1.A.1 Helicopters/installed equipment and parts

a) EC135 T1, T2, T2+, T3, P1, P2, P2+, P3, 635 T1, 635 T2+, 635 T3, 635 P2+, 635 P3, S/N 0001 up to S/N 1999 inclusive.

b) Flexball P/N 76CF-8716 Flexball

1.A.2 Non-installed equipment and parts See 1.A.1.b).

1.B ASSOCIATED REQUIREMENTS None.

1.C REASON Airbus Helicopters was informed by the supplier about a non-conformity during its production of the Flexball. This non-conformity can lead to increased friction inside the Flexball up to jamming, which can result in a malfunction during operation.

Analysis revealed that only specific Flexballs, that were manufactured after November 22, 2021, are affected (see Section 4.A).

1.D DESCRIPTION Examine the documents. If necessary, inspect for conformity of the Flexball and replace it.

1.E COMPLIANCE

1.E.1 Compliance at helicopter manufacturer level Helicopters/installed equipment and parts:

Airbus Helicopters makes it mandatory to comply with the instructions of Section 3.

of this EASB before the delivery of the helicopter.

PAGE 2 of 9 Revision 0, 2022-04-29 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 Non-installed equipment and parts:

Airbus Helicopters makes it mandatory to comply with the instructions of Section

3.B.4 of this EASB before the delivery or installation of the equipment.

1.E.2 Compliance in service Helicopters/installed equipment and parts:

Airbus Helicopters makes it mandatory to comply with the instructions of Section 3.

of this EASB before the next flight of the helicopter. If an affected Flexball, as shown in Section 4.A, is installed, one ferry flight to the maintenance center is permitted.

Non-installed equipment and parts:

Airbus Helicopters makes it mandatory to comply with the instructions of Section

3.B.4 of this EASB before installation or before August 31, 2022 whichever occurs first.

1.F APPROVAL Approval of this document:

The technical content of this document is approved under the authority of DOA No. EASA.21J.700.

1.G MANPOWER Qualification Mechanic Electrician Pilot Others*

0.5 h

0.5 h (inspection) Estimated 8 h Man-hours (replacement per unit, it necessary) * CAMO (or equivalent)

1.H WEIGHT AND BALANCE Not changed.

1.l POWER CONSUMPTION Not affected.

1.J SOFTWARE UPGRADES/UPDATES None.

1.K REFERENCES IN 3643-1-00: Introduction of the digital Service Bulletin reporting service R-TEX AMM.

Revision 0, 2022-04-29 PAGE 3 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043

1.L OTHER AFFECTED PUBLICATIONS Not affected.

1.M INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:

Not affected.

Mixability:

Not affected.

PAGE 4 of 9 Revision 0, 2022-04-29 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 2 MATERIAL INFORMATION

2.A MATERIAL: PRICE - AVAILABILITY - PROCUREMENT None.

2.B LOGISTIC INFORMATION None.

2.C MATERIAL REQUIRED PER HELICOPTER/COMPONENT Material supplied by the operator:

The Flexball could be affected by a replacement. If so, it can be ordered at Airbus Helicopters, Dept. Spares Order Administration.

Please reference the following number in the customer order: EASB-EC135-67A-043 No. Keyword Qty New P/N Old P/N Rem 1 76CF-8716 1 Flexball 1 76CF-8716 Remark:

A = Send back to the supplier as shown in Section 2.D.

2.D MATERIAL TO BE RETURNED Send the removed Flexball back to the supplier:

Triumph Controls France

- Attn. J. Kassardjian - 2 avenue de la Carelle 94290 Villeneuve Le Roi - France Revision 0, 2022-04-29 PAGE 5 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043

ACCOMPLISHMENT INSTRUCTIONS З.А GENERAL Obey the "General Recommendations for Working on helicopters" (AMM 03-10-02, 2-1).

З.В WORK STEPS З.В.1 Examination of the documents of installed equipment and parts

1. Examine the documents to identify if an affected Flexball, as shown in Section 4.A, was installed after November 22, 2021:

a. If an affected Flexball (2, Fig. 1) was installed, proceed in accordance with Section 3.B.3.

b. If the installed Flexball (2) is not listed in Section 4.A, it can be considered as not affected and do not need to be replaced. Proceed in accordance with Section 3.C.

c. If it cannot be identified if an affected Flexball (2) was installed, proceed in accordance with Section 3.B.2.

3.B.2 Inspection for conformity of the Flexball on the helicopter

1. Remove the side channel covers and cable channels as necessary (AMM 52-50-00, 4-3).

2. Examine the S/N on the label (1) of the Flexball (2).

3. Identify if the S/N of the installed Flexball (2) is listed in Section 4.A:

a. If the installed Flexball (2) is affected as shown in Section 4.A, proceed in accordance with Section 3.B.3.

b. If the installed Flexball (2) is not listed in Section 4.A, it can be considered as not affected and do not need to be replaced. Install the removed side channel covers and cable channels as necessary (AMM 52-50-00, 4-3). Proceed in accordance with Section 3.C.

c. If the installed Flexball (2) cannot be identified, proceed in accordance with Section 3.B.3.

3.B.3 Replacement of the Flexball

1. Remove the ball bearing control (AMM 67-20-00, 4-9).

2. Fill out the reply form sheet as shown in Section 4.B.

3. Send the affected Flexball (2) back as shown in Section 2.D.

4. Install a serviceable Flexball (2) (AMM 67-20-00, 4-10).

5. Install the removed side channel covers and cable channels (AMM 52-50-00, 4-3).

6. Proceed in accordance with Section 3.C.

PAGE 6 of 9 Revision 0, 2022-04-29 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 Date P/N TCF: Amdt S/N 1 Label 2 Flexball Inspection for conformity of the Flexball on the helicopter Figure 1 Revision 0, 2022-04-29 PAGE 7 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043

3.B.4 Work steps for non-installed equipment or parts

1. Examine if a Flexball was received after November 22, 2021:

a. If a Flexball was received after November 22, 2021, proceed in accordance with Section 3.B.4.2.

b. If none Flexball was received after November 22, 2021, the Flexballs can be considered as not affected. Proceed in accordance with Section 3.C.

2. Examine if an affected S/N, as shown in Section 4.A, is on stock.

If sO, - fill out the reply form sheet as shown in Section 4.B

- send the affected Flexball back as shown in Section 2.D.

З.С COMPLIANCE CONFIRMATION Compliance with this document:

Record full compliance with this EASB, with the revision number, in the helicopter documents.

Record full compliance with this EASB, with the revision number, in the log card of the equipment (if a log card exists).

Record the full compliance with this EASB (see IN 3643-1-00 for instructions):

QR-Code or hypertext link NOTE The recording of compliance with EASBs in the R-Tex tool does not replace the recording in the helicopter documents.

EASB EC135-67A-043

3.D OPERATING AND MAINTENANCE INSTRUCTIONS None.

4 APPENDIX

4.А List of affected Flexballs Nomenclature P/N S/N Flexball 76CF-8716 1899, 1903, 1904, 1908, 1909, 1910 List of affected Flexballs

4.B Reply form sheet PAGE 8 of 9 Revision 0, 2022-04-29 This document is available on the internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS EASB EC135-67A-043 Reply form sheet for EASB EC135-67A-043 Revision O "Inspection for Conformity of the Flexball" Please completely fill out reply form sheet and send it to the given e-mail.

To Airbus Helicopters

SERVICE BULLETIN GERMANY e-mail: support.technical-bulletins.ahd@airbus.com Address of the operator:

Helicopter S/N:

Flexball P/N: Flexball S/N:

Date: Signature:

Please copy page! Original page remains in EASB!

Revision 0, 2022-04-29 PAGE 9 of 9 This document is available on the internet: www.airbushelicopters.com/techpub/