Service bulletin · Airbus Helicopters

Revision 1Airbus Helicopters ASB No. EC155-25A153 Rev 1 · 49 pages · 4.3 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0496, the docket of AD 2021-17-17. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0496 (document 0004) · AD 2021-17-17

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC155-25A153
Latest revision known
EC155-25A153, Revision 1

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 49OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0496, the docket of AD 2021-17-17. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '2b1eeb81ec70ee54c0fa5f2a3ed1af9b8b51740f10947b43b6b0c1a8ae041bbf'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153 Civil version(s): B, B1

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE EQUIPMENT AND FURNISHINGS - Emergency floatation system Inspection of the floatation balloon supply hoses For the attention of Revision No. Date of issue Revision 0 2020-01-07 Revision 1 2020-02-12 Summary:

During maintenance operations on the emergency floatation system of an AS365 helicopter, the third compartment of the LH front floatation balloon did not inflate.

After analysis, the hose that supplies the gas flow from the cylinder assembly to the related floatation balloon compartment was found clogged.

This ALERT SERVICE BULLETIN provides the instructions for checking that there is no obstruction in the floatation balloon supply hoses of the emergency floatation system.

Reason for last revision:

The purpose of revision 1 of this ALERT SERVICE BULLETIN is:

- to update the organization of the effectivity paragraph to improve understanding and to modify exclusion conditions of some floatation balloon S/Nos.,

- to replace "next minor maintenance of the emergency floatation system" with "next scheduled maintenance of the floatation balloon" in the compliance paragraph of this ALERT SERVICE BULLETIN,

- to specify that customers who are able to perform the maintenance of the floatation balloon as per the maintenance documentation can themselves comply with the appended Safran Aerosystems Service Bulletin,

- to modify Safran Aerosystems Service Bulletin in the appendix.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

ASB EC155 25A153 Revision 0 2020-01-07 Page 1/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1. PLANNING INFORMATION

CAUTION

THIS ALERT SERVICE BULLETIN IS WRITTEN

BASED ON THE ORIGINAL HELICOPTER CONFIGURATION (AS DEFINED IN • THE INDIVIDUAL INSPECTION LOG BOOK (RIC)). IT

ALSO TAKES INTO ACCOUNT ALL AIRBUS

HELICOPTERS APPROVED CONFIGURATION

CHANGES MADE AFTER DELIVERY, IF AIRBUS HELICOPTERS WAS INFORMED OF THEM. IT IS

THE RESPONSIBILITY OF THE OPERATOR TO

CHECK THE COMPATIBILITY OF ANY

MODIFICATIONS WITH THE CURRENT HELICOPTER CONFIGURATION.

MODIFICATIONS ARE INCOMPATIBLE, IT IS THE

RESPONSIBILITY OF THE OPERATOR TO DEFINE

THE NECESSARY ADAPTATION WORK AND HAVE

THEM APPROVED BY THE AIR TRANSPORT

AUTHORITIES IN THE COUNTRY CONCERNED,

AND MAKE SURE THAT THEIR AIRWORTHINESS IS FOLLOWED UP.

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts

1.A. 1.a. Affected parts Helicopters equipped with emergency floatation system parts with the following MP/Nos. and for which the emergency floatation system parts have been produced before the first issue date of this ALERT SERVICE BULLETIN:

Emergency floatation system part Safran equipment designation Floatation balloon MP/N MP/N 216118-0 L/H FWD FLOAT ASSEMBLY 216064-0 216119-0 R/H FWD FLOAT ASSEMBLY 216167-0 216120-0 L/H AFT FLOTATION 216166-0 216121-0 R/H AFT FLOTATION 216280-0 Revision 0 2020-01-07 Page 2/49 Revision 1 2020-02-12 This document is available on the Internet: www elicopters.com/techpub

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.A. 1.b. Non-affected S/Nos.

- In the following table, S/Nos. excluded (because already checked by Safran Aerosystems):

Emergency Safran equipment Floatation balloon floatation system designation MP/N S/Nos. excluded part MP/N 216118-0 L/H FWD FLOAT 216064-0 87, 119, 233, 264, 344, 381, 388, ASSEMBLY 397, 412, 430 216119-0 R/H FWD FLOAT 216167-0 69, 330, 339, 391, 394, 403, 420,

ASSEMBLY 216120-0 L/H AFT FLOTATION 216166-0 157, 163, 167, 170 216121-0 R/H AFT FLOTATION 216280-0 161, 171, 175, 179

- In the following table, S/Nos. can be excluded only if it can be secured that:

• no hose has been replaced during any MRO action, and . the floatation balloon was originally delivered together with the helicopter.

If this information cannot be secured, then consider that the S/Nos. are affected:

Excluded S/Nos., only if it can be secured that no hose has been Emergency Safran equipment Floatation balloon replaced during any MRO action floatation system designation MP/N and the floatation balloon was part MP/N originally delivered together with the helicopter 216118-0 L/H FWD FLOAT 216064-0 406 and higher

ASSEMBLY 216119-0 R/H FWD FLOAT ASSEMBLY 216167-0 403 and higher 216120-0 L/H AFT FLOTATION 216166-0 186 and higher 216121-0 R/H AFT FLOTATION 216280-0 190 and higher NOTE 1 The S/N of the emergency floatation assembly is the same as the S/N of the floatation balloon.

NOTE 2 Helicopters on which Safran Aerosystems Service Bulletin No. 025-69-18 is marked on the Log Cards of the emergency floatation system parts are not concerned.

NOTE 3 Refer to the Log Cards (FM) to identify the current modification status of the equipment.

Revision 0 2020-01-07 Page 3/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.A.2. Non-installed equipment or parts

1.A.2.a. Affected parts In the following table, emergency floatation system parts produced before the first issue date of this ALERT SERVICE BULLETIN and listed below:

Emergency floatation Safran equipment designation Floatation balloon MP/N system part MP/N 216118-0 L/H FWD FLOAT ASSEMBLY 216064-0 216119-0 R/H FWD FLOAT ASSEMBLY 216167-0 216120-0 L/H AFT FLOTATION 216166-0 216121-0 R/H AFT FLOTATION 216280-0 And/or Spare hoses produced before January 2014 and listed below:

- MP/N 200030-1 or,

- MP/N 216187-0.

NOTE 4 Hoses with a visible green "dot" on the base of the checked end fitting (or banjo union) are not concerned.

1.A.2.b. Non-affected S/Nos.

- In the following table, S/Nos. excluded (because already checked by Safran Aerosystems):

Emergency floatation Safran equipment Floatation balloon system part MP/N designation MP/N S/Nos. excluded 216118-0 L/H FWD FLOAT ASSEMBLY 216064-0 87, 119, 233, 264, 344, 381, 388, 397, 412,430 216119-0 R/H FWD FLOAT ASSEMBLY 216167-0 69, 330, 339, 391, 394, 403, 420, 429 216120-0 L/H AFT FLOTATION 216166-0 157, 163, 167, 170 216121-0 R/H AFT FLOTATION 216280-0 161, 171, 175, 179 Revision 0 2020-01-07 Page 4/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

- In the following table, S/Nos. can be excluded only if it can be secured that:

• no hose has been replaced during any MRO action, And . the floatation balloon was originally delivered together with the helicopter.

If this information cannot be secured, then consider that the S/Nos. are affected:

Excluded S/Nos., only if it can be secured that no hose has been Emergency floatation Safran equipment Floatation balloon replaced during any MRO action system part MP/N designation MP/N and the floatation balloon was originally delivered together with the helicopter 216118-0 L/H FWD FLOAT ASSEMBLY 216064-0 406 and higher 216119-0 R/H FWD FLOAT ASSEMBLY 216167-0 403 and higher 216120-0 L/H AFT FLOTATION 216166-0 186 and higher 216121-0 R/H AFT FLOTATION 216280-0 190 and higher NOTE 5 The S/N of the emergency floatation assembly is the same as the S/N of the floatation balloon.

NOTE 6 Emergency floatation system parts on which Safran Aerosystems Service Bulletin No. 025-69-18 is marked on the Log Card are not concerned.

Revision 0 2020-01-07 Page 5/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.B. ASSOCIATED REQUIREMENTS

CAUTION

BEFORE COMPLYING WITH THIS ALERT SERVICE

BULLETIN, CHECK THAT NO ALERT SERVICE

BULLETIN RELATED TO THIS INSTALLATION WAS

ISSUED BETWEEN THE DATE OF APPROVAL OF

THIS ALERT SERVICE BULLETIN AND THE DATE

OF COMPLIANCE WITH THIS ALERT SERVICE BULLETIN ON THE HELICOPTER.

For the emergency floatation systems and / or the floatation balloons listed below, with the hose installed on the helicopter, comply with ALERT SERVICE BULLETIN No. 25A152 in addition to this ALERT SERVICE BULLETIN:

Emergency floatation system part MP/N Floatation balloon MP/N 216118-0 216064-0 216119-0 216167-0

1.C. REASON Revision 0:

During maintenance operations on the emergency floatation system of an AS365 helicopter, the third compartment of the LH front floatation balloon did not inflate.

After analysis, the hose that supplies the gas flow from the cylinder assembly to the related floatation balloon compartment was found clogged.

This ALERT SERVICE BULLETIN provides the instructions for checking that there is no obstruction in the floatation balloon supply hoses of the emergency floatation system.

Revision 1:

The purpose of revision 1 of this ALERT SERVICE BULLETIN is:

- to update the organization of the effectivity paragraph to improve understanding and to modify exclusion conditions of some floatation balloon S/Nos.,

- to replace "next minor maintenance of the emergency floatation system" with "next scheduled maintenance of the floatation balloon in the compliance paragraph of this ALERT SERVICE BULLETIN,

- to specify that customers who are able to perform the maintenance of the floatation balloon as per the maintenance documentation can themselves comply with the appended Safran Aerosystems Service Bulletin,

- to modify Safran Aerosystems Service Bulletin in the appendix.

Revision 1 of this ALERT SERVICE BULLETIN affects compliance with revision 0 of this ALERT SERVICE

BULLETIN If revision 0 of this ALERT SERVICE BULLETIN has been complied with, please refer to paragraph 1.A.2.a.

and the second table of paragraphs 1.A.1.b. and 1.A.2.b. and consider the additional requirements.

Revision 0 2020-01-07 Page 6/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- removing the emergency floatation system parts

- For staff not able to perform the floatation balloon maintenance:

. return the emergency floatation system part to the Safran Aerosystems Service network for compliance with Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

- For staff able to perform the floatation balloon maintenance:

. comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

NOTE 7 The inspection as per Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.) must be performed by the Safran Aerosystems Services network or by staff able to perform the floatation balloon maintenance as per the applicable maintenance documentation.

- installing the emergency floatation system parts.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3. of this ALERT SERVICE BULLETIN before the delivery of the helicopter (or the equipment).

1.E.2. Compliance in service The work must be performed on the helicopter by the operator.

Helicopters/installed equipment or parts:

Case 1: Helicopters operated over water Comply with paragraph 3. of this ALERT SERVICE BULLETIN within 600 flight hours from receipt of the ALERT SERVICE BULLETIN revision O issued on the date indicated in the page footer or at the next scheduled maintenance of the floatation balloon (the first limit reached is applicable).

Case 2: Helicopters not operated over water Comply with paragraph 3. of this ALERT SERVICE BULLETIN at the next scheduled maintenance of the floatation balloon.

Non-installed equipment or parts:

Before installation on the helicopter or on emergency floatation system parts, modify stocks as per paragraph

3.B.5. of this ALERT SERVICE BULLETIN without exceeding 6 months.

Revision 0 2020-01-07 Page 7/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on December 19, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on February 10, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:

Qualification: - 1 Mechanical Technician.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: - 8 hours for the Mechanical Technician (excluding the time for compliance with Safran Aerosystems Service Bulletin No. 025-69-18).

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at one day.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2020-01-07 Page 8/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.

Aircraft Maintenance Manual (AMM):

AMM: 24-00-00-911: General Safety Instructions - Electrical Power AMM: 25-62-01-061: Removal/Installation - Containers AMM: 25-62-01-721: Functional Tests - Emergency Floatation Gear Control Circuits Standard Practices Manual (MTC):

MTC: 20-07-01-201: Handling of helicopters in a hangar and in a prepared area - Handling MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-102: Rules in force applicable for repair and maintenance of aircraft - General rules applicable to aircraft

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF NOT, IT IS

THE OPERATOR'S RESPONSIBILITY TO OBTAIN

THE DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2020-01-07 Page 9/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Refer to paragraph 2. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

2.B. LOGISTIC INFORMATION Refer to paragraph 2. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Refer to paragraph 2. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

2.D. EQUIPMENT OR PARTS TO BE RETURNED Refer to paragraph 3.C. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

Revision 0 2020-01-07 Page 10/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- As per Task 24-00-00-911 (AMM), read and comply with the general safety instructions for electrical power.

- As per Work Card 20-07-01-201 (MTC), read and comply with the instructions for handling helicopters in a hangar and in a prepared area.

- As per Work Card 20-07-02-201 (MTC), read and comply with the safety instructions for parking the helicopter in a repair shop.

- As per Work Card 20-07-03-406 (MTC), read and comply with the technical instructions applicable when working on an aircratt electrical circuit and power generating systems.

- As per Work Card 20-08-05-102 (MTC), read and comply with the general rules in force applicable to the repair and maintenance of aircraft.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Install the appropriate access equipment.

- Disconnect all the electrical power supplies.

- Remove all the equipment and furnishings to enable adequate access to the work area.

3.B.2. Procedure

- Remove the emergency floatation system part as per Task 25-62-01-061 (AMM).

- For staff not able to perform the floatation balloon maintenance:

. return the emergency floatation system part to the Safran Aerosystems network for compliance with Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

- For staff able to perform the floatation balloon maintenance:

. comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

NOTE 1 The inspection as per the Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.) must be performed by the Safran Aerosystems Services network or by staff able to perform the floatation balloon maintenance as per the applicable maintenance documentation.

- Install the emergency floatation system part on which Safran Aerosystems Service Bulletin No. 025-69-18 is marked on the Log Card as per Task 25-62-01-061 (AMM).

3.B.3. Tests

- Set the helicopter to test condition.

- Connect all the electrical power supplies again.

- Energize the helicopter electrical power systems.

- Perform the functional tests of the control circuits of the emergency floatation system parts as per Task 25-62-01-721 (AMM).

- De-energize the helicopter electrical power systems.

Revision 0 2020-01-07 Page 11/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-25A153

3.B.4. Final steps

- Clean the work areas and the helicopter as per Work Card 20-07-03-408 (MTC).

- Install the equipment and furnishings removed during preliminary steps (paragraph 3.B.1.).

- Clear the access equipment.

- Set the helicopter to flight condition.

3.B.5. Work steps for non-installed equipment or parts

3.B.5.a. Check of the emergency floatation system spare parts

- For staff not able to perform the floatation balloon maintenance:

. return the emergency floatation system part to the Safran Aerosystems network for compliance with Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

- For staff able to perform the floatation balloon maintenance:

. comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

NOTE 2 The inspection as per the Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.) must be performed by the Safran Aerosystems Services network or by staff able to perform the floatation balloon maintenance as per the applicable maintenance documentation.

3.B.5.b. Check of the spare hoses For the spare hoses listed in paragraph 1.A.2., comply with paragraph 3.C. of Safran Aerosystems Service Bulletin No. 025-69-18 (Appendix 4.A.).

3.C. RECORD OF COMPLIANCE Compliance with this document:

- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.

- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the - Po care compliane Log Card (FM) of the emergency floatation system part.

And/or Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the Log Card (FM) of the floatation balloon.

- Please confirm compliance with this ALERT SERVICE BULLETIN:

QR-Code or hypertext link NOTE 3 The recording of compliance with ALERT SERVICE BULLETINS in the R-Tex tool does not replace the recording in the helicopter documents.

ASB EC155 25A153 Revision 0 2020-01-07 Page 12/49 Revision 1 2020-02-12 This document is available on the Internet: www.airbushelicopters.com/techpub