Service bulletin · Airbus Helicopters

Revision 2Airbus ASB No EC155-34A033 Rev 2 (IBR) · 15 pages · 305 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1099; AD 2020-15-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2019-1099 (document 0005) · AD 2020-15-01

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
EC155-34A033
Latest revision known
EC155-34A033, Revision 2, dated January 30, 2018

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 15OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2019-1099; AD 2020-15-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'f8b4e2d9de7d2d4fa872602aac85c65633de450f636278984d8d87702dde8960'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 Civil versions: B, B1

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE NAVIGATION - Attitude and Heading Reference System (AHRS) Modification of the wiring of the FLIGHT/GROUND logic (connector 11 ALPHA) Corresponds to modifications 365A084754.00 and 365A084754.01 For the attention of Revision No. Date of issue Revision O 2017-07-19 Revision 1 2017-10-09 Revision 2 2018-01-30 Summary:

The purpose of this ALERT SERVICE BULLETIN is to correct the connections of the FLIGHT/GROUND logic of the primary reference system Attitude and Heading Reference System AHRS), the FCDS (Flight and Control Display System) and the SSCVFDR (Combined Voice and Flight Data Recording System) by modifying the connection and, as per configuration, by modifying the wiring of connector 11 ALPHA.

Reason for last Revision:

The purpose of the revision of this ALERT SERVICE BULLETIN is to clarify the information in the post installation verification procedure, notably for AFCS messages: "FLIGHT DETECT" and "GROUND DETECT" which are displayed shortly on the VEMD, and are therefore difficult to perceive by the operator.

Compliance:

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

Revision 0 2017-07-19 Page 1/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters POST MOD 0722B51 and PRE MOD 0731B89 (SSCVFDR upgraded following standard ED112), and PRE MOD 365A084754.00, OR Helicopters POST MOD 0722B51 and POST MOD 0731B89 (SSCVFDR upgraded following standard ED112), and PRE MOD 365A084754.00 and 365A084754.01.

NOTE Refer to the Aircraft Individual Inspection Record (or RIC AMS) to identify the actual modification status of the aircraft.

1.A.2. Non-installed equipment or parts Not applicable.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Revision 0:

During a flight test for repair, a difference was found in the attitude indications provided by AHRS and displayed on the pilot and copilot PFD (Primary Flight Display) and the standby horizon during rapid turn changes of the helicopter.

This difference of indication is due to a wiring anomaly in the FLIGHT/GROUND logic from the management card of FLIGHT/GROUND states, as the AHRS have a different dynamic according to the FLIGHT or GROUND state of the helicopter.

The analysis of this incident showed that the AHRS were receiving the same FLIGHT/GROUND signal of the same position sensor of the landing gear whereas each AHRS must receive information from a different source to avoid displaying erroneous attitudes and vertical speed on both PFD. This absence of segregation in the acquisition of the FLIGHT/GROUND information also affects the FCDS (Flight Control Display System) system which includes FCDM (Flight Control Display Module), SMD45 pilot screens, and for helicopters POST MOD 0731B89, the recorder L3-COM FA5001-ED112.

To correct the existing common mode in the acquisition of the FLIGHT/GROUND information used by the AHRS, the FCDS system and the recorder L3-COM FA5001-ED112, Airbus Helicopters developed the modifications:

- 365A084754.00 which consists in re-allocating the electronic card outputs by modifying the connection to connector 11 ALPHA (helicopters PRE and POST MOD 0731B89),

- 365A084754.01 which consists in modifying the wiring of connector 11 ALPHA (helicopters POST MOD 0731B89).

Revision 0 2017-07-19 Page 2/15 Revision 2 2018-01-30 This document is available on the Internet: www.airb licopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 Revision 1:

The purpose of the revision of this ALERT SERVICE BULLETIN is to specify the configurations of helicopters concerned and to update information in the post installation verification procedure.

Revision 1 does not affect compliance with the previous revision of this ALERT SERVICE BULLETIN for POST MOD 0722B51 helicopters having applied successfully the procedure of the previous revision.

Revision 2:

The purpose of the revision of this ALERT SERVICE BULLETIN is to clarify the information in the post installation verification procedure, notably for AFCS messages: "FLIGHT DETECT" and "GROUND DETECT" which are displayed shortly on the VEMD, and are therefore difficult to perceive by the operator.

Figure 2 has been updated: terminal 6 has become terminal 2 on 11ALP2-DP1.

Revision 2 does not affect compliance with the previous revision of this ALERT SERVICE BULLETIN for POST MOD 0722B51 helicopters on which the procedure of the previous revision was successfully complied with.

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

Helicopters POST MOD 0722B51 and PRE MOD 0731B89: (compliance with modification 365A084754.00)

- modifying the connection to connector 11 APLHA,

- performing the associated tests.

Helicopters POST MOD 0722B51 and POST MOD 0731B89: (compliance with modifications 365A084754.00 and 365A084754.01)

- modifying the connection to connector 11 APLHA,

- modifying the wiring to connector 11 APLHA,

- performing the associated tests.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:

Airbus Helicopters makes compliance with the instructions given in paragraph 3. of this ALERT SERVICE BULLETIN mandatory before the delivery of the helicopter.

Non-installed equipment or parts:

Not applicable.

Revision 0 2017-07-19 Page 3/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

1.E.2. Compliance in service The work must be performed on the helicopter by the Operator.

Helicopters/installed equipment or parts:

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

For helicopters POST MOD 0722B51 and PRE MOD 0731B89, comply with paragraph 3 (except for

3.B.2.b.), within 12 months as from receipt of this ALERT SERVICE BULLETIN, issued on the date mentioned in the page footer.

For helicopters POST MOD 0722B51 and POST MOD 0731B89, comply with paragraph 3 (except for

3.B.2.a.), within 12 months as from receipt of this ALERT SERVICE BULLETIN, issued on the date mentioned in the page footer.

Non-installed equipment or parts:

Not applicable.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modifications 365A084754.00 and 365A084754.01, which were approved on July 17, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on July 18, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on October 06, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on January 29, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

1.G. MANPOWER

• For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:

Qualifications: 1 Electrical Technician.

1 Avionics Technician.

Revision 0 2017-07-19 Page 4/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 Time for the operations is indicated for reference, for a standard configuration.

Time for the operations: 2 hours approximately for Electrical Technician for compliance with modification 365A084754.00.

2 hours approximately for Electrical Technician for compliance with modification 365A084754.01.

3 hours approximately for Avionics Technician (with jacking of the helicopter).

Helicopter downtime is estimated at approximately 1 day.

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN:

- AMM: 07.10.00.581: Lifting the Helicopter on Jacks

- AMM: 24.00.00.911: General Safety Instructions - Electrical Power

- AMM: 24.00.00.481: Power Supply - Electrical Power Systems

- AMM: 34.00.00.911: General Safety Instructions - Navigation System

- AMM: 34.23.00.721: Functional Tests - Primary Reference System

- MTC: 20.07.01.201: Handling of helicopters in a hangar and in a prepared area

- MTC: 20.07.02.201: Helicopter parked in a repair shop

- MTC: 20.07.03.406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions

- MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair

- MTC: 20.80.20.101: Contact Insertion and Extraction Method and Tools

- MTC: 20.80.20.441: Installation of electrical cable bundles and optical fibres

1.L. OTHER AFFECTED PUBLICATIONS The modifications will be incorporated in:

- Wiring Diagram Manual (WDM),

- Special Index Modification (SIM).

These documents will be updated during a future revision.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2017-07-19 Page 5/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT For any information concerning modification kits and/or components or for assistance, contact the Sales and Customer Relations Department.

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Components to be ordered for one helicopter POST MOD 0731B89:

New Former Designation Qty Item P/N P/N Instruction Extension 2 E0541-10 Cap 1 E0737B0816 2 NOTE 3 The components listed in the table above concern the modification of the wiring of connector 11ALPHA (modification 365A084754.01). These components are not necessary for helicopters PRE MOD 0731B89.

Revision 0 2017-07-19 Page 6/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 Equipment or parts to be ordered separately for one helicopter POST MOD 0731B89:

New Former Designation Qty P/N Item P/N Instruction Wire, electrical 2 m EN2267-010A002S NOTE 4 The equipment or parts listed in the table above concern the modification of the wiring of connector 11 ALPHA (modification 365A084754.01). Electrical wire (3) is not necessary for helicopters PRE MOD 0731B89.

Consumables to be ordered separately:

As per Work Cards and Tasks mentioned in this ALERT SERVICE BULLETIN.

The consumables can be ordered separately from the KLX AEROSPACE SOLUTIONS company.

Website: https://www.klxaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2017-07-19 Page 7/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Read and comply with the instructions for handling helicopters in a hangar as per MTC Work Card

20.07.01.201.

- Read and comply with the instructions for helicopters parked in a repair shop as per MTC Work Card 20.07.02.201.

- Read and comply with the technical instructions applicable when working on an aircraft electrical circuit and with ground power generating systems as per MTC Work Card 20.07.03.406.

- Read and comply with the instructions on contact insertion and extraction method and tools as per MTC Work Card 20.80.20.101.

- Read and comply with the instructions for installing electrical cable bundles as per MTC Work Card 20.80.20.441.

3.B. WORK STEPS

CAUTION

BEFORE STARTING WORK ON THE ELECTRICAL SYSTEMS, READ TASK 24-00-00-911.

CAUTION

BEFORE STARTING WORK ON THE NAVIGATION INSTALLATIONS, READ TASK 34-00-00-911.

3.B.1. Preliminary steps

- Install suitable access means

- Remove and/or open all cowlings, panels, doors and equipment as required for access to work zones.

3.B.2. Procedure (Figure 1)

3.B.2.a. Helicopters POST MOD 0722B51 and PRE MOD 0731B89

- Modify the connection to connector 11 ALPHA as per Figure 1

3.B.2.b. Helicopters POST MOD 0722B51 and POST MOD 0731B89

- Modify the connection to connector 11 ALPHA as per Figure 1.

- Modify the wiring to connector 11 ALPHA as per Figure 2

3.B.3. Final steps

- Carry out appearance checks on an aircraft after an inspection or repair as per MTC Work Card 20.07.03.408.

- Install and/or close all cowlings, panels, doors and equipment removed and/or opened during preliminary steps (paragraph 3.B.1.).

- Remove the access means.

Revision 0 2017-07-19 Page 8/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

3.B.4. Tests For helicopters:

- Perform the "tests following modification of FLIGHT/GROUND wiring on the rear landing gear struts" as per Appendix 4.A

- Perform the functional tests of the primary reference system as per AMM Task 34.23.00.721.

- Reset helicopter into flight condition.

3.C. COMPLIANCE CONFIRMATION Compliance with this document:

Record compliance with this ALERT SERVICE BULLETIN with the Revision number in the helicopter documents.

Tracking of modifications in the documentation:

Helicopters POST MOD 0722B51 and PRE MOD 0731B89:

Record compliance with modification 365A084754.00 in the aircraft documents.

Helicopters POST MOD 0722B51 and POST MOD 0731B89:

Record compliance with modifications 365A084754.00 and 365A084754.01 in the aircraft documents.

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Revision 0 2017-07-19 Page 9/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 PRE MOD 365A084754.00 11ALP2-CP1 11 ALPHA 1UW22E VOL 1 - 1UW25NE .. 1FF4E .

VOL 5 . 1FF45NE . 1UW28E VOL 7 . 1UW29E 11ALP2-DP1 2UW22E VOL 2 2UW25NE 2FF4E VOL 6 2FF45NE POST MOD 365A084754.00 11ALP2-CP1 5 . 1UW22E VOL 5 1UW25NE 7 . 1FF4E VOL 7 1FF45NE 1UW28E VOL 1 1UW29E 11ALP2-DP1 2UW22E VOL 6 6 2UW25NE .. 2FF4E VOL 2 2 2FF45NE Figure 1 Revision 0 2017-07-19 Page 10/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033 POST MOD 0731B89 POST MOD 365A084754.00 PRE MOD 365A084754.01 11 ALPHA 11ALP2-DP1 44N-4 2FF45NE 10DEL33-AP1

- 2UW39E _ 2UW38E 10DEL10-AP1 _ 2RK368E 13R-3 POST MOD 0731B89 POST MOD 365A084754.00 POST MOD 365A084754.01 11ALP2-DP1 44N-4 E - 2FF45NE ¡EPX PERA 10DEL33-AP1

- 2UW39E.

- 2UW38E 10DEL10-AP1

- 2RK368E - R 13R-3 2 Figure 2 Revision 0 2017-07-19 Page 11/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. EC155-34A033

4. APPENDIX

4.A. TESTS FOLLOWING MODIFICATION OF THE FLIGHT/GROUND WIRING ON THE REAR

LANDING GEAR STRUTS Although this ALERT SERVICE BULLETIN has no impact on the AFCS function, a check of the flight/ground logics has been integrated to ensure non-regression of this modification in the AFCS behavior.

Do not use AFCS maintenance mode to display the requested messages.

4.A.1. Preliminary steps

- Energize the helicopter using the electrical power bench as per Sub-task 24-00-00-481-002 of Task 24-00-00-481.

- Make sure that:

• "AP" pushbutton on the APMS control unit shows an amber "OFF",

• following equipment are energized and initialized : FCDM1, FCDM2, ADC1, ADC2, AHRS1, AHRS2, PFD1, PFD2, ICP1 and ICP2

4.A.2. Procedure

CAUTION

DO NOT ACTIVATE THE CVFDR MAINTENANCE COMMAND.

CAUTION

FOR CHECKING THE CVFDR OPERATION, IT IS

NECESSARY TO RESPECT THE RIPS DISCHARGE TIME OF 10 MINUTES.

CAUTION DO NOT ENGAGE THE AUTOPILOT.

CAUTION

DO NOT PRESSURIZE THE HYDRAULIC POWER SYSTEM.

- Jack up helicopter as per Sub-task 07-10-00-581-001 of Task 07-10-00-581.

- Disconnect electrical connectors "9G" (LH landing gear) and "10G" (RH landing gear).

4.A.2.a. LH landing gear to FLIGHT position / RH landing gear to FLIGHT position

- On LH landing gear, make a shunt between "D" and "E" (fixed connector) in order to simulate the FLIGHT position.

- On RH landing gear, make a shunt between "D" and "E" (fixed connector) in order to simulate the FLIGHT position.

- Energize the helicopter electrical system.

Revision 0 2017-07-19 Page 12/15 Revision 2 2018-01-30 This document is available on the Internet: www.airbushelicopters.com/techpub/