On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0905; AD 2021-02-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2015-2714; AD 2015-26-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Alert Service Bulletin
- Number
- EC225-04A012
- Latest revision known
- EC225-04A012, Revision 2, dated November 6, 2019
- Copies
- 2 files of 2 revisions
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 8OCR
Revision 2, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-0905; AD 2021-02-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4d50a4b8918b0905909f9b43934e764cbd1c7b515159de9a1f0098ff9516b8ad' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '4d50a4b8918b0905909f9b43934e764cbd1c7b515159de9a1f0098ff9516b8ad' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB No. EC225-04A012 Civil version(s): LP
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE LIMITATIONS - Energy-absorbing seats Label "Do not stow anything under any seat" ATA: 25 For the attention of Revision No. Date of issue Revision 0 2014-08-26 Revision 1 2017-09-07 Revision 2 2019-11-06 Summary:
Compliance with this ALERT SERVICE BULLETIN consists in affixing a label which indicates that nothing must be stowed under the energy-absorbing seats.
Reason for last revision:
The purpose of revision 2 is to cancel compliance with this ALERT SERVICE BULLETIN for helicopters that have embodied modification 332P085421.00 or 332P085421.01 or 332P085421.02 or 332P085421.03.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2014-08-26 Page 1/8 Revision 2 2019-11-06 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment Helicopters:
- equipped with at least one seat listed in paragraph 1.A.2., whose label indicated in the Appendix is not visible to the occupants of these seats,
- which do not embody the following modifications:
. 0728251 or 332P0884159 or 332P085421.00 or 332P085421.01 or 332P085421.02 or 332P085421.03 (seats in the cabin), and/or . 0728352 or 332P084160 (seats in the cockpit).
- delivered before September 07, 2017 (date of issue of revision 1 of this ALERT SERVICE BULLETIN).
NOTE 1 Modification 0728251 or 332P084159 or 332P085421.00 or 332P085421.01 or 332P085421.02 or 332P085421.03, subject of ALERT SERVICE BULLETIN No. 25A179, consists in affixing a label which indicates that nothing should be stowed under the seats when energy-absorbing seats are installed in the cabin.
NOTE 2 Modification 0728352 or 332P084160, subject of ALERT SERVICE BULLETIN No. 25A203, consists in affixing a label which indicates that nothing should be stowed under the seats when energy-absorbing seats are installed in the
1.A.2. Non-installed equipment Pilot, copilot and/or passenger seats listed in the table below:
Generic Part Number Equipment manufacturer Seat type (MP/N) Sicma Aero Seat Sicma 192 192xx-xx-xx Zodiac Seats France Socea ST102 2510102-xx-xx Sogerma F+E H140 0520-(-0-1) (Fischer + Entwicklungen) F+E (Fischer + Entwicklungen) H160 0718-0-0-0-0
1.B. ASSOCIATED REQUIREMENTS Not applicable.
Revision 0 2014-08-26 Page 2/8 Revision 2 2019-11-06 This document is available on the internet: www.airbu shelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
1.C. REASON Revision 0:
During certification of an energy-absorbing seat with a new Part Number, it was observed that the label which indicates that the space under the seats must remain free was not systematically installed.
Objects stowed under this type of seat may reduce the efficiency of its energy-absorbing function and thus jeopardize the occupant's survival in the event of a crash.
Consequently, and pending a definitive solution, Airbus Helicopters makes it mandatory to affix a label which indicates that nothing must be stowed under the energy-absorbing seats.
Revision 1:
The purpose of Revision 1 of this ALERT SERVICE BULLETIN is to:
- specify the effectivity of this ALERT SERVICE BULLETIN,
- remove the Type "H110" seats.
Revision 1 does not affect compliance with Revision 0 of this ALERT SERVICE BULLETIN.
In addition, Airbus Helicopters has defined mandatory modifications which must be embodied through the following ALERT SERVICE BULLETINS:
- No. 25A179 for seats installed in the cabin and,
- No. 25A203 for seats installed in the cockpit.
Compliance with these ALERT SERVICE BULLETINS cancels this ALERT SERVICE BULLETIN.
Revision 2:
The purpose of revision 2 is to cancel compliance with this ALERT SERVICE BULLETIN for helicopters that have embodied modification 332P085421.00 or 332P085421.01 or 332P085421.02 or 332P085421.03.
1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN consists in:
- preparing one or several (locally made) label(s) which indicate(s) that nothing must be stowed under the energy-absorbing seats,
- affixing this (these) label(s) so that it is (they are) visible to the occupants of these seats.
Revision 0 2014-08-26 Page 3/8 Revision 2 2019-11-06 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
1.E. COMPLIANCE
1.E.1. Compliance at the works Not applicable.
1.E.2. Compliance in service Helicopters/installed equipment:
Comply with paragraph 3. within 110 flying hours, without exceeding 1 month following receipt of Revision 0 of this ALERT SERVICE BULLETIN issued on the date indicated at the bottom of the page.
Non-installed equipment:
When installing a seat, make sure that the label is visible to the occupant.
1.F. APPROVAL Approval of modifications:
Not applicable.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on August 26, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on August 26, 2014 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on September 05, 2017 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on September 05, 2017 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on November 04, 2019 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on November 04, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
Revision 0 2014-08-26 Page 4/8 Revision 2 2019-11-06 This document is available on the internet: www.airbush licopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:
Qualification: 1 Technician.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.
Estimated Man-hours: approximately 15 minutes.
1.H. WEIGHT AND BALANCE Not applicable.
1.. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.
1.K. REFERENCES Not applicable.
1.L. DOCUMENTS AFFECTED Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Not applicable.
Revision 0 2014-08-26 Page 5/8 Revision 2 2019-11-06 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Not applicable.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Not applicable.
2.D. MATERIAL TO BE RETURNED Not applicable.
Revision 0 2014-08-26 Page 6/8 Revision 2 2019-11-06 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL Not applicable.
3.B. OPERATIONAL PROCEDURE
- Prepare a label in accordance with the Appendix.
NOTE According to the number of seats and the configuration, it may be necessary to prepare several labels.
- Affix the label inside the helicopter so that it is visible and legible to the occupant (or occupants) of the seat(s) specified in paragraph 1.A.1.:
. in the cabin: near each emergency exit, next to the emergency exit label, in accordance with the Appendix, . in the cockpit: on the doors.
3.C. RECORD OF COMPLIANCE Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter documents.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2014-08-26 Page 7/8 Revision 2 2019-11-06 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-04A012
4. APPENDIX
- Label (a) marking characteristics:
. text to be marked: "DO NOT STOW ANYTHING UNDER ANY SEAT", . red text on white background or white text on red background, . font size: 6 mm minimum for the labels in the cockpit
9.6 mm minimum for the labels in the cabin
• the marking must not be easily erasable,
• the text is given in English but can be translated into another language, according to the local regulations in force.
- The label (a) must not be easily damaged.
- Examples of labels:
DO NOT STOW ANYTHING
UNDER ANY SEAT
DO NOT STOW ANYTHING
UNDER ANY SEAT
- Location of the labels (a) in the cabin:
. LH side shown below; the RH side is symmetrical
EXIT EXIT EXIT
(a) (a) (a) Revision 0 2014-08-26 Page 8/8 Revision 2 2019-11-06 This document is available on the internet: www.airbu ters.com/techpub/