On this page
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 2 proposed ADs.
Text · 22OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0873; AD 2021-26-14 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b1c649a3c30f6a94f7a281c3656bdb5cb879925d90826ffcfa60994a4c335c75' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b1c649a3c30f6a94f7a281c3656bdb5cb879925d90826ffcfa60994a4c335c75' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. EC225-05A038 Civil version: LP
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TIME LIMITS - MAINTENANCE CHECKS Visual check of the splicing of frame X5295 ATA: 53 For the attention of Revision No. Date of issue Revision 0 2014-04-15 Revision 1 2021-02-09 Summary:
The purpose of this ALERT SERVICE BULLETIN is to perform:
- The rail support cut-out, if it has not been carried out under Service Bulletin No. 05-019 (MOD 332A081354.00) or MOD 0728090 (Manufacturer level), and
- A periodic visual check on the extended aluminum splice at frame X5295.
Compliance with this ALERT SERVICE BULLETIN cancels the instructions given in Service Bulletin No. 05-019.
Reason for last Revision:
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to:
- update the applicability in paragraph 1.A.1. to cancel the instructions of this ALERT SERVICE BULLETIN for POST MOD 0728463 helicopters,
- make the embodiment of modification 0728463 mandatory when a crack is discovered on the splice.
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
ASB EC225-05A038 Revision 0 2014-04-15 Page 1/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters on which the extended aluminum splice has been installed at frame X5295 through:
- MOD 0726517, or,
- Service Bulletin No. 53-003 (PRE MOD 0726493 and POST MOD 0726517), And PRE MOD 0728463.
NOTE 1 Refer to the aircraft individual inspection log book (MOD record) to identify the actual configuration of the helicopter.
NOTE 2 Service Bulletin No. 53-003 consists in applying MOD 0726517 or MOD 0726493 depending on airframe configuration.
NOTE 3 MOD 0726493 consists in installing a reinforced steel splice equivalent to MOD 0728463.
NOTE 4 MOD 0728463 is applicable through Service Bulletin No. 53-061 (Procedure for replacing the RH and LH splices under plates and brackets from the Main Gear Box (MGB) bars).
1.A.2. Non-installed equipment Not applicable.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
Revision 0 2014-04-15 Page 2/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
1.C. REASON Revision 0:
Airbus Helicopters has been informed of a case of cracks in the splice and frame X5295 on an AS332 L2 helicopter on which Service Bulletin No. 53-003 (MOD 0726517 - Aluminum Splice - Modified splicing of frame X5295) had been complied with 6600 hours ago.
These cracks were discovered during detailed inspection of the frame as part of the Major Inspection.
This is the first reported case of cracks in the frame and splice following compliance with Service Bulletin No. 53-003.
Service Bulletin No. 05-019 (Rail support cut-out for visual check on frame X5295 splicing) had not been complied with on this aircraft.
Compliance with Service Bulletin No. 05-019 Revision 3 or previous would have revealed the crack in the splice and facilitated its repair, limiting the damage to frame X5295, which could induce a crack in the frame.
Considering that the applicable maintenance (detailed check of frame X5295) is scheduled only at 9600h // 16 years (Major Inspection), it alone does not suffice to ensure the integrity of the frame.
Consequently, Airbus Helicopters makes the rail support cut-out as well as the periodic visual check on the splicing of frame X5295 mandatory and cancels the instructions given in Service Bulletin No.05-019.
Revision 1:
Airbus Helicopters introduced MOD 0728463 to replace the aluminum splices with reinforced steel splices.
This modification reduces the risk of cracks and cancels the instructions of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
- Application of MOD 332A081354.00: rail support cut-out Then,
- Visual check for cracks.
And
- Embodiment of MOD 0728463 when a crack is discovered on the splice.
Revision 0 2014-04-15 Page 3/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service Helicopters/installed equipment or parts:
Comply with Flow Chart 1 below:
Rail cut-out produced?
Yes (MOD 332A081354.00 available through Service Bulletin No No. 05-019 or MOD 0728090 Inspection of the splice performed every 110 flying hours following receipt of Yes Splice installed before No Revision 0 as per § 3.B.3. A/C TSN = 12000 flying hours ?
Yes TSN of the splice less No than or equal to 1650 flying hours Comply with Comply with Flow Chart 3 Flow Chart 2 Revision 0 2014-04-15 Page 4/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038 Flow Chart 2:
TSN of the splice less than or equal to 1650 flying hours Rail support cut-out and Borescope inspection of the check of the splice at of the splice as per § 3.B.5. frame at 1700 flying hours Or 1700 flying hours of the splice as per § 3.B.1.,
3.B.2., 3.B.3. and 3.B.4.
Borescope inspection of the frame every 50 flying hours as per § 3.B.5.
Rail support cut-out and check of the splice within 750 flying hours after reaching 1700 flying hours of the splice as per § 3.B.1.,
3.B.2., 3.B.3. and 3.B.4.
Inspection of the splice every 110 flying hours as per § 3.B.3.
Revision 0 2014-04-15 Page 5/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038 Flow Chart 3:
Installation of splice after A/C TSN = 12000 flying hours Or Installation of splice before A/C TSN = 12000 flying hours and TSN of the splice strictly more than 1650 flying hours Rail support cut-out and Borescope inspection of the check of the splice within 50 flying hours following frame performed within Or receipt of Revision 0 as per 50 flying hours following receipt of Revision 0 as per § § 3.B.1., 3.B.2., 3.B.3. and З.В.5. 3.В.4.
Borescope inspection of the frame every 50 flying hours as per § 3.B.5.
Rail support cut-out and check of the splice within 750 flying hours following receipt of Revision 0 as per § 3.B.1., 3.B.2., 3.B.3. and
3.В.4.
Inspection of the splice every 110 flying hours as per § 3.B.3.
Non-installed equipment or parts:
Not applicable.
Revision 0 2014-04-15 Page 6/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
1.F. APPROVAL Approval of modifications:
The information or instructions relate to modification 332A081354.00, which was approved on February 02, 2010 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The information or instructions relate to modification 07 28090, which was approved on February 27, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on April 14, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on April 14, 2014 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on February 03, 2021 under the authority of EASA Design Organization Approval No. 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on February 03, 2021 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:
Qualification: 2 Mechanical Technicians or 2 Airframe Technicians.
The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.
Estimated Man-hours: 40 hours for 2 Technicians for embodiment of modification on LH and RH sides.
NOTE 5 Airbus Helicopters reminds you that the time necessary for complying with paragraphs 3.B.1. and 3.B.4. may vary depending on the helicopter configuration (VIP configuration, external load-carrying provisions etc.).
15 minutes to comply with paragraph 3.B.3. (Rail cut-out performed) for the check.
3 hours to comply with paragraph 3.B.5. for the check.
Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.
Helicopter downtime is estimated at 4 days.
Revision 0 2014-04-15 Page 7/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbush elicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038 1 H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.
Aircraft Maintenance Manual (MMA):
MMA: Task 52-12-00-351: PLUG DOORS - Replacing Side Plug Door Upper Rails Standard Practices Manual (MTC):
MTC: Work Card 20-02-04-402: Riveting - Installation of rivets - retrofitting and repair MTC: Work Card 20-02-09-601: Checking structural parts / components using the dye penetrant procedure - Crack detection MTC: Work Card 20-03-01-102: General repair instructions - Unriveting principle MTC: Work Card 20-03-02-403: General rivet replacement principles - Installation of "JO-BOLT" threaded rivets MTC: Work Card 20-04-04-403: Surface treatment before painting - Touch-up of protective treatment with Alodine 1200 MTC: Work Card 20-04-05-101: Paint and primer application procedure - General information concerning painting means and paint touch-ups MTC: Work Card 20-05-01-222: General sealing procedures - Application of PR 1771 B2 sealant MTC: Work Card 20-08-05-103: General rules applicable to aircraft - Monitoring of parts in operation - marking - service life customization Information Notice (IN):
IN 3447-1-00: Introduction of the digital Service Bulletin reporting service R-TEX IN 3481-1-00: The Marketplace: an AirbusWorld Ordering service
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2014-04-15 Page 8/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information on the price of modification kits and/or components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.
Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to modity.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:
Key Word Qty New P/N Item Old P/N → Instruction Blind rivet 4 ASNA0363T0506 1 Discard Blind bolt 4 ASNA0082B206 4 Discard Revision 0 2014-04-15 Page 9/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038 Consumables to be ordered separately:
As per the Tasks and Work Cards indicated in this ALERT SERVICE BULLETIN and the list below.
Key Word Qty P/N CM Item Sealing compound (PR1771B2) AR DHN1-005-M51 6068 2 Adhesive AR DHS173-143.20 6019 3 You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2014-04-15 Page 10/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL NOTE 1 If you encounter any difficulties complying with this ALERT SERVICE BULLETIN, contact your Airbus Helicopters technical support:
Tel: +33 (0) 4 42 85 99 29 Fax: +33 (0) 4 42 85 99 66 E-mail: support.technical-airframe.ah@airbus.com
3.B. WORK STEPS
3.B.1. Preliminary steps (Figure 1) Install the access equipment.
- Remove upper rail (b) ((g) RH side) of the door (remove the rivets over approximately 1.5 meters (4.92 ft) as per Sub-Task 52-12-00-031-001 of MMA Task 52-12-00-351.
- Remove the footsteps above the rails.
Remove the cover strips from the doors.
3.B.2. Cutting out the junction profiles (Corresponds to MOD 332A081354.00) (Figures 1, 2 and 3) Remove the rivets (a) (Figure 1) from the LH and RH sides as per MTC Work Card 20-03-01-102.
Position a plate (e.g.: titanium plate) between junction profile (d) ((e) RH side) and splice (c) ((f) RH side) in a manner that will protect the splice (c) ((f) RH side).
- Produce a cut-out in junction profile (d) ((e) RH side) in accordance with the dimensions specified on Figure 2.
- Install the rivets (1) (Figure 2) by interlaying sealing compound (2) as per MTC Work Card 20-02-04-402.
NOTE 2 If it is difficult to install the rivets due to insufficient access, Airbus Helicopters proposes the use of blind bolts P/N ASNA0082B206 (4) as a variant, in accordance with MTC Work Card 20-03-02-403.
Deburr and round off sharp edges on junction profile (h) (i) RH side).
Apply anticorrosive agent ALODINE to the machined zones as per MTC Work Card 20-04-04-403.
Perform paint touch-ups as per MTC Work Card 20-04-05-101.
Apply a bead of sealing compound (2) around the edge of Areas Y (Figure 3).
Re-bond the door seal with adhesive (3) if necessary.
Identify junction profile (h) (U) RH side) in accordance with paragraph 3.C.
3.B.3. Visual check for cracks (Figure 3) Visually check that there are no cracks in the splice (c) ((f) RH side) in the areas previously cleared in paragraph 3.B.2. (Area Y, Figure 3).
. If no cracks are found, leave as is.
. If a crack is found, comply with Service Bulletin No. 53-061 before resuming flights.
Revision 0 2014-04-15 Page 11/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. EC225-05A038
3.B.4. Final steps (Figure 1) Install the cover strips of the doors.
Install the footsteps above the rails.
- Install upper rail (b) ((g) RH side) of the door as per Sub-Task 52-12-00-431-001 of MMA Task 52-12-00-351.
- Remove the access equipment.
3.B.5. Visual check for cracks on frame X5295 and on inner skin NOTE 3 The procedure given in paragraph 3.B.5. describes the operation for one side. It must be carried out:
- For Areas 1 and 2 on both the RH and LH sides of frame X5295.
- For Area 3:
. On the RH side of frame X5295 for all helicopters, at the attachment provision for the hoist jib or for the optional "exhaust gas deflector" (DDJ) equipment.
. On the LH side of frame X5295 for helicopters equipped with the optional "exhaust gas deflector" (DDJ) equipment.
3.B.5.a. Preliminary steps As per Figure 4:
- Provide access to Areas 1, 2 and 3 of frame X5295 (See NOTE 3).
- Visually check that there are no cracks in Areas 1, 2 and 3, specified below, on frame X5295 and on the inner skin. If in doubt, carry out a dye-penetrant inspection as per MTC Work Card 20-02-09-601.
. If necessary, remove the binding clamps to move away the electrical harnesses during the visual or borescope check and remove the sound-proofing blankets.
3.B.5.b. Inspection of Areas 1, 2 and 3 DETAILS of Areas 1, 2 and 3
a) As per Figure 5, DETAILS of Area 1, at the plate attachment screws and the four screws of the MGB bar attachment fitting, on the forward and rear parts of frame X5295 and on the skin.
b) As per Figure 6, DETAILS of Area 2, at the sliding cowling rail attachment screws on the forward and rear parts of frame X5295 and on the skin.
c) As per Figure 7, DETAILS of Area 3, on the RH side of frame X5295, at the attachment screw holes for the hoist jib or the optional "exhaust gas deflector" (DDJ) equipment, on the forward or rear parts of frame X5295 and at rivet A, where the crack in the frame has been detected in the last incident (rivet taking up all the loads following a crack in the splice)
c) As per Figure 8, DETAILS of Area 3, on the LH side of frame X5295, at the attachment screw holes for the optional "exhaust gas deflector" (DDJ) equipment, on the forward or rear parts of frame X5295 and at rivet A, where the crack in the frame has been detected in the last incident (rivet taking up all the loads following a crack in the splice) Revision 0 2014-04-15 Page 12/22 Revision 1 2021-02-09 This document is available on the Internet: www.airbushelicopters.com/techpub/