On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0893; AD 2020-23-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0893; AD 2020-23-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- Type
- Alert Service Bulletin
- Number
- EC225-25A207
- Latest revision known
- EC225-25A207, Revision 2, dated March 21, 2019
- Copies
- 2 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 13OCR
Revision 2, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2018-0893; AD 2020-23-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '359c846e9b60366a510ab67e5bba0a5890e06bacf78e1ff1d6f0caaf4f64f9b3' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '359c846e9b60366a510ab67e5bba0a5890e06bacf78e1ff1d6f0caaf4f64f9b3' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB No. EC225-25A207 Civil version(s): LP
ALERT SERVICE BULLETIN
CORRECTIVE MEASURE EQUIPMENT AND FURNISHINGS - Emergency flotation gear Installation of flotation gear rear fittings with spherical leveling washers Corresponds to modification 0728456 For the attention of Revision No. Date of issue Revision 0 2018-04-04 Summary:
This ALERT SERVICE BULLETIN consists in installing spherical leveling washers and longer screws to attach the rear upper fittings of the LH and RH emergency flotation gear.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2018-04-04 Page 1/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters which are equipped with emergency flotation gear and which have not had modification 0728456 embodied.
NOTE Refer to the aircraft individual inspection record (MOD record) to identify the actual configuration of the helicopter.
1.A.2. Non-installed equipment or parts Not applicable.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Airbus Helicopters has been informed of several cases of rupture of the lower screws of the rear upper fitting on the LH emergency flotation gear.
The rupture is due to a tapering gap under the screw heads.
Rupture of the screws could lead to incorrect deployment of the emergency flotation gear in the event of ditching, and thus to instability of the helicopter on the water surface.
Airbus Helicopters introduced a check to be carried out every 15 flying hours through ALERT SERVICE BULLETIN No. 05A047 to ensure the presence of the lower screws of the rear upper fitting on the RH and LH emergency flotation gear.
Airbus Helicopters has introduced a modification (0728456) which eliminates the tapering gap under the screw heads.
Compliance with this ALERT SERVICE BULLETIN cancels the requirement for compliance with ALERT SERVICE BULLETIN No. 05A047.
1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in installing spherical leveling washers and longer screws to attach the rear upper fittings of the LH and RH emergency flotation gear.
Revision 0 2018-04-04 Page 2/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Airbus Helicopters makes compliance with the instructions given in paragraph 3. of this ALERT SERVICE BULLETIN mandatory.
1.E.2. Compliance in service The work on the helicopter is to be performed by the operator.
Helicopters/installed equipment or parts:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Comply with paragraph 3. of this ALERT SERVICE BULLETIN no later than 12 months following receipt of this ALERT SERVICE BULLETIN, issued on the date indicated at the bottom of the page.
Non-installed equipment or parts:
The establishment of stocks of spares related to compliance with this ALERT SERVICE BULLETIN is left to the initiative of the operator.
1.F. APPROVAL Approval of modifications:
The information or instructions relate to modification 0728456, which was approved on December 16, 2016 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN No. 25A207 Revision 0 was approved on April 03, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN No. 25A207 Revision 0 was approved on April 03, 2018 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:
Qualification: 1 Aircraft Structure Technician.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations: approximately 16 hours for the Aircraft Structure Technician.
The estimated helicopter downtime is approximately 2 days.
Revision 0 2018-04-04 Page 3/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
1.H. WEIGHT AND BALANCE Weight: + 0.082 kg.
Longitudinal moment: + 0.56 m.kg.
After work completion, record weights and moments in Section 6.2 of the Flight Manual (PMV).
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
MMA: 24-00-00-611: General Instructions - General MMA: 25-62-01-052: Removal-Installation of Flotation Gear Fittings - Emergency Flotation Gear MMA: 25-62-01-064: Removal-Installation of the Rear Cradle Assembly - Emergency Flotation Gear MTC: 20.02.05.404: Joining by bolts and nuts - Joining MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning of parts MTC: 20.04.01.401: Cleaning of mechanical parts - Cleaning of parts MTC: 20.04.04.405: Touch-up of cadmium-plated surfaces (cadmium-plating with a swab) - Surface treatment before painting MTC: 20.05.01.211: Sealing compound Mastinox 6856 K (CM 518) and 6856 H - General sealing procedures MTC: 20.05.01.223: Use of Sealing compound PR 1776 B2 / 1776 S - General sealing procedures MTC: 20.05.01.227: Application of Jointing Compound CA 1010 - General sealing procedures MTC: 20.07.02.201: Helicopter parked in a repair shop - Safety instructions MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair - Technical instructions Revision 0 2018-04-04 Page 4/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
1.L. OTHER AFFECTED PUBLICATIONS
CAUTION
THE USER OF THIS SERVICE BULLETIN MUST
ENSURE THAT ALL THE MAINTENANCE
DOCUMENTS REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE.
OTHERWISE, IT IS THE USER'S RESPONSIBILITY
TO OBTAIN THE DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.
The modification will be incorporated into the following manual: MMA.
This document will be issued subsequently.
The update of the IPC documentation shall be subject to a customer order.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:
PRE MOD and POST MOD parts are not interchangeable.
Mixability:
It is authorized to mix PRE MOD and POST MOD screws and washers on the LH and RH sides.
The mixing of screws and washers PRE MOD and POST MOD on the same side is prohibited.
Revision 0 2018-04-04 Page 5/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT For any information concerning the kits and/or components or for assistance, contact the Airbus Helicopters Network Sales & Customer Relations Department.
Airbus Helicopters' Super Puma Program Department will advise customers of availability times for kits or components.
Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.
2.B. LOGISTIC INFORMATION Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:
Designation Qty New P/N Item Former P/N → Instruction Spherical washer kit 332A07-2845-6071 Base washer 12 332A84-1218-20 1 Spherical washer 12 332A84-1218-21 2 Hexagonal head screw 2 22129BC080046L Hexagonal head screw 4 22125BC080054L 4 Self-locking hexagonal nut 6 ASN52320BH080N 5 Equipment or parts to be ordered separately:
Refer to the Work Cards and Tasks referenced in this Service Bulletin.
Revision 0 2018-04-04 Page 6/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207 Consumables to be ordered separately:
Refer to the Work Cards and Tasks referenced in this Service Bulletin and the list below:
Designation Qty Consumable P/N Item Sealing compound 1L ECS7009 CM0518 6 Conducting adhesive 1 kg ECS2129.10 CM6056 7 The consumables can be ordered separately from the KLX AEROSPACE SOLUTIONS company.
Website: https://www.klxaerospace.com/kixaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888
2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.
Revision 0 2018-04-04 Page 7/13 This document is available on the internet: www.airbushelicopters.com/techpub/
F AIRBUS HELICOPTERS ASB No. EC225-25A207
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
- Read and comply with the general electrical instructions as per MMA Task 24-00-00-611.
- Read and comply with the general instructions for using cleaning products on individual parts and on aircraft as per MTC Work Card 20.04.01.102.
- Read and comply with the general instructions for cleaning mechanical parts as per MTC Work Card 20.04.01.401.
- Read and comply with the general instructions concerning the application of Mastinox sealing compound 6856K (CM 518) and 6856 H as per MTC Work Card 20.05.01.211.
- Read and comply with the general instructions for the use of sealing compound PR 1776 B2 / 1776 S as per MTC Work Card 20.05.01.223.
- Read and comply with the general instructions for the application of jointing compound CA 1010 as per MTC Work Card 20.05.01.227.
- Read and comply with the general instructions for a helicopter parked in a repair shop as per MTC Work Card 20.07.02.201.
Unless otherwise indicated, tighten the screws to the standard torque as per MTC Work Card 20.02.05.404.
3.B. WORK STEPS
3.B. 1. Preliminary steps
- Install appropriate access equipment.
- Disconnect all electrical power supplies.
- Remove the equipment and furnishings as required to gain access to the different work areas.
- If necessary, remove the rear cradle assembly as per Sub-task 25-62-01-034-001 of MMA Task 25-62-01-064.
3.B.2. Procedure
3.B.2.a. Replacement of screws and washers (Figure 1, Figure 2) NOTE 1 The procedure is described for the LH side only.
Follow the same procedure on the RH side, with external fitting (b).
- Remove and retain external fitting (a) as per Sub-task 25-62-01-031-001 of MMA Task 25-62-01-052 (Figure 1, Detail A).
- Discard:
. screws (c), (d) and (e), . washers (t),
• nuts (g).
- Install external fitting (a) using (Figure 2 POST MOD):
• base washers (1) (structure side) and spherical washers (2) (screw/nut side), screws (3) and (4) coated with a thin layer of sealing compound (6) on the smooth surface,
• nuts (%).
Revision 0 2018-04-04 Page 8/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207 On external fitting (a):
- Make sure that the washers do not make contact with the welds (Figure 2, Detail A):
• if contact, perform the spotfacing to the diameter of 17 mm (+ 0.1 / + 0.1) with a cutter root radius of 0.5 mm,
• protect the spotfacing(s) as per MTC Work Card 20.04.04.405.
On the internal fitting:
- Make sure that the washers do not make contact with the fitting radius (Figure 2, Detail E):
. if the washers fall in the radius of the bracket, perform the spotfacing to the diameter of 17 mm (+ 0.1 / + 0.1) with a cutter root radius of 0.5 mm,
• protect the spotfacing(s) as per MTC Work Card 20.04.04.405.
- Torque tighten as indicated (Figure 2, Detail A).
- Apply a bead of conducting adhesive (7) to the periphery of the LH rear upper fitting (a).
3.B.3. Final steps NOTE 2 The external paint and markings are at the operator's expense.
- If necessary, install the rear cradle assembly as per Sub-task 25-62-01-434-001 of MMA Task 25-62-01-064.
- Install the equipment and furnishings removed during preliminary steps (paragraph 3.B.1.).
- Clean and recondition the work areas and the helicopter as per MTC Work Card 20.07.03.408.
- Remove the access equipment.
- Return the helicopter to flight configuration.
3.C. COMPLIANCE CONFIRMATION Compliance with this document:
Record full compliance with this ALERT SERVICE BULLETIN, with its revision number, in the helicopter documents.
Tracking of modifications in the documentation:
Record the embodiment of modification 0728456 in the helicopter documents.
Identification of modifications on equipment or parts:
Not applicable.
Revision 0 2018-04-04 Page 9/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:
Not applicable.
Maintenance instructions:
At each fitting installation, comply with the procedure given in paragraph 3.B.2.a.
The Aircraft Maintenance Manual (MMA) will incorporate this modification in a forthcoming revision.
Once this modification has been incorporated in the Aircraft Maintenance Manual (MMA), refer to this manual.
Revision 0 2018-04-04 Page 10/13 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
PRE MOD
LA SIDE
RH SIDE SYMMETRICAL a (LH b (RH) g Figure 1 Revision 0 2018-04-04 Page 11/13 This document is available on the internet: www.a elicopters.com/techpub/
AIRBUS HELICOPTERS ASB No. EC225-25A207
PAGE LEFT BLANK INTENTIONALLY Revision 0 2018-04-04 Page 12/13 This document is available on the internet: www.airbushelicopters.com/techpub/