Service bulletin · Eurocopter

Revision 1U.S. DOT/FAA - Eurocopter ASB SA330-05.98, Revision 1 · 11 pages · 196 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0872; AD 2014-05-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2013-0872 (document 0004) · AD 2014-05-11

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Alert Service Bulletin
Number
SA330-05.98
Latest revision known
SA330-05.98, Revision 1, dated June 5, 2013

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 11OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2013-0872; AD 2014-05-11 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '5521c4ad2477eab74bdeea9c19e2e1c570acaa5c7fdfd9c4d7e4c2d505bb05ed'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98 Civil version (s): J Military version(s): Ba, Ca, Ea, H, L, Jm, S1, Sm

ALERT SERVICE BULLETIN SUBJECT: TIME LIMITS - MAINTENANCE CHECKS Check of tail rotor control turnbuckle ATA: 67 Rotor Flight Controls For the attention of Revision No. Date of issue Revision 0 2013-03-14 Revision 1 2013-06-05 Summary:

The purpose of this ALERT SERVICE BULLETIN is to carry out a visual check for absence of corrosion or crack(s) on the tail rotor control turnbuckles.

Reason for last Revision:

The purpose of Revision 1of this ALERT SERVICE BULLETIN is to specify that the replacement of the turnbuckle related to external corrosion of less than or equal to 0.3 mm is carried out within 6 months following the last compliance with paragraph 3.B.2.c of this ALERT SERVICE BULLETIN.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

Revision 0 2013-03-14 Page 1/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 2OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment All SA330 helicopters equipped with turnbuckles P/N 330A27-5031-20.

1.A.2. Non-installed equipment On turnbuckles P/N 330A27-5031-20.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Revision 0:

EUROCOPTER has been informed of the rupture of one of the tail rotor control turnbuckles due to corrosion damage. The damage was discovered during a flight control check after a MGB replacement. Investigation revealed that missing Mastinox sealant between the turnbuckle tappings and end-fittings led to formation of galvanic corrosion.

In case of corrosion, tail rotor control turnbuckles may break and lead to loss of tail rotor control on the helicopter. In order to prevent a similar occurrence, EUROCOPTER makes it mandatory to check all the tail rotor control turnbuckles to make sure there is no corrosion or crack.

In addition, EUROCOPTER makes the visual check on the turnbuckles every 12 months mandatory.

Revision 1:

The purpose of Revision 1of this ALERT SERVICE BULLETIN is to specify that the replacement of the turnbuckle related to external corrosion of less than or equal to 0.3 mm is carried out within 6 months following the last compliance with paragraph 3.B.2.c of this ALERT SERVICE BULLETIN.

Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with Revision 0.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists of:

- A visual check on all tail rotor control turnbuckles to make sure there is no corrosion or crack.

Revision 0 2013-03-14 Page 2/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 3OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

1.E. COMPLIANCE

1.E.1. Compliance at the works Helicopters/installed equipment:

Not applicable.

Non-installed equipment:

Not applicable.

1.E.2. Compliance in service Helicopters/installed equipment:

Comply with paragraphs 3.A., 3.B.1. and 3.B.2.a. of this ALERT SERVICE BULLETIN, within 110 flying hours or no later than within 3 months from receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date mentioned in the page footer.

Following compliance with paragraph 3.B.2.a., interpret the results for each of the two turnbuckles:

- If there are cracks or corrosion, replace the turnbuckle as per paragraph 3.B.2.d. before resuming flights.

- If there are no cracks and no corrosion, comply with paragraph 3.B.2.b.1.

Following compliance with paragraph 3.B.2.b.1., interpret the results:

If there are cracks, replace the turnbuckle as per paragraph 3.B.2.d. before resuming flights.

- If there are no cracks and no corrosion, reinstall the turnbuckle as per paragraph 3.B.3. before resuming flights.

- If there are no cracks but corrosion is found, comply with paragraph 3.B.2.b.2.

Following compliance with paragraph 3.B.2.b.2., interpret the results:

- If there is corrosion to a depth of over 0.3 mm. replace the turnbuckle as per paragraph 3.B.2.d. before resuming flights.

If there is corrosion to a depth less than, or equal to 0.3 mm:

. Carry out corrosion treatment as per paragraph 3.B.2.c.

. Reinstall the turnbuckle as per paragraph 3.B.3. before resuming flights.

• Replace the turnbuckle as per paragraph 3.B.2.d. within 6 months following the last compliance with paragraph 3.B.2.c. of this ALERT SERVICE BULLETIN.

NOTE A flow chart describing compliance with paragraph 3. and used to interpret the results is also available in Appendix 1.

Then, Comply with paragraph 3. at intervals not exceeding 12 months.

Revision 0 2013-03-14 Page 3/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 4OCROpen in PDF

• EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98 Non-installed equipment:

- For new turnbuckles or turnbuckles which have never been installed, no action is required.

- For turnbuckles which have already been installed, comply with paragraphs 3.A. and 3.B.2.a. before installation or no later than within 12 months from receipt of this ALERT SERVICE BULLETIN Revision 0, issued on the date mentioned in the page footer.

Then, interpret the results in the same manner as for installed equipment.

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 14, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 14, 2013 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 14, 2013 by the EUROCOPTER Airworthiness Department for export military versions.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on june 05, 2013 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on june 05, 2013 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on june 05, 2013 by the EUROCOPTER Airworthiness Department for export military versions.

1.G. MANPOWER Qualification:

For compliance with this ALERT SERVICE BULLETIN:

1 Mechanical Technician.

Time for the operations:

4 hours.

Estimated helicopter grounding time:

4 hours Revision 0 2013-03-14 Page 4/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 5OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

1.H. WEIGHT AND BALANCE Not applicable.

1.1. EFFECT ON ELECTRICAL LOADS Not applicable.

1.J. A SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN:

Maintenance Manual:

67.00.301 General instructions

67.20.404 Control Cables Removal - Installation OR 350A General instructions 352G Control Cables Removal - Installation OR Aircraft Maintenance Manual (MMA):

67-00-00-611 General Instructions 67-22-00-061 Control Cables Removal - Installation Standard Practices Manual (MTC):

20.02.06.408 Safetying Turnbuckles

20.04.03.401 General Method for Reconditioning Corroded Metal Surfaces

20.04.04.403 Touch-up of protective treatment with Alodine 1200

20.04.05.402 Use of EPOXY primer P05 - P20 and P50 Revision 0 2013-03-14 Page 5/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 6OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

1.L. DOCUMENTS AFFECTED

CAUTION

THE USER OF THIS ALERT SERVICE BULLETIN

MUST ENSURE THAT ALL MAINTENANCE

DOCUMENTS NECESSARY

MAINTENANCE OF THIS INSTALLATION IS AVAILABLE. OTHERWISE, IS THE

RESPONSIBILITY OF THE USER TO OBTAIN

DOCUMENTS FROM THEIR USUAL EUROCOPTER CONTACT.

Documents to be updated:

The technical information given in this ALERT SERVICE BULLETIN will be integrated into the following manuals: MDE, AMM.

Documents already updated:

Not applicable.

1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Not applicable.

Revision 0 2013-03-14 Page 6/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 7OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

2. MATERIAL INFORMATION

2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT For any information concerning price of kits and/or components, contact the Customer Relations and Sales Department of the EUROCOPTER network.

EUROCOPTER Etablissement de Marignane Direction Ventes et Relations Client (ECR) 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please always specify the mode of transport, the destination and the serial numbers of the aircraft to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.

2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Components to be ordered for one helicopter or one assembly:

New Former Key Word Qty Item P/N PIN → Instruction Turnbuckle 2* 330A27-5031-20 1 * Depending on the condition as specified in paragraph 3.B with a maximum quantity of 2 per helicopter.

Material to be ordered separately:

Key Word Qty New PIN Item Former P/N → Instruction Locking Pin 4 651-91-4D54 2 Work Card 67.20.404 Work Card 352G Lock Washer 4 330A27-5030-20 Task 67-22-00-061 Products to be ordered separately:

New Former Key Word Qty Item P/N P/N → Instruction MASTINOX sealant AIR 6856 K 4

2.D. MATERIAL TO BE RETURNED Not applicable.

Revision 0 2013-03-14 Page 7/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 8OCROpen in PDF

EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Comply with the General Instructions (refer to paragraph 1.K.).

3.B. OPERATIONAL PROCEDURE

3.B.1. Preliminary steps Remove the two tail rotor control turnbuckles (a) (refer to paragraph 1.K.) (Figure 1).

3.B.2. Procedure (Figure 1)

3.B.2.a. Visual check for corrosion or crack(s) on tappings and the middle hole (internal surface of turnbuckles) Using an inspection light source, perform a visual check of the tappings and the middle hole of the turnbuckles (a) for absence of corrosion or crack(s):

Areas affected by corrosion may be dirty or show bulges and are covered with powdery deposit or whitish or reddish pits.

Interpret the results as per paragraph 1.E.2.

3.B.2.b. External surface check

3.B.2.b. 1. Visual check for corrosion or crack(s) on external surface Perform a visual check with an inspection light source on the external surface of the turnbuckles (a) for absence of corrosion or crack(s):

Areas affected by corrosion may be dirty or show bulges, the paint has usually faded and is covered with powdery deposit or whitish or reddish pits.

Interpret the results as per paragraph 1.E.2.

3.B.2.b.2. Measurement of the corrosion depth

- For each turnbuckle, if there is corrosion:

. Sand the corroded surface until the corrosion is eliminated and apply the procedure defined in Work Card 20.04.03.401 (MTC) General method for reconditioning corroded metal surfaces.

• Gauge the damaged depth.

- Interpret the results as per paragraph 1.E.2.

3.B.2.c. Corrosion treatment on external surface Perform corrosion treatment as per Work Card:

20.04.03.401 General Method for Reconditioning Corroded Metal Surfaces

20.04.04.403 Touch-up of protective treatment with Alodine 1200

20.04.05.402 Use of EPOXY primer P05 - P20 and P50

3.B.2.d. Replacement of turnbuckle

- Discard the damaged turnbuckles) (a).

- Install the new turnbuckle(s) (1) as per Final steps paragraph 3.B.3.

Revision 0 2013-03-14 Page 8/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 9OCROpen in PDF

• EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

3.B.3. Final steps Visually check the general surface condition of the turnbuckle before installing it (scratches or damage to the paint) and, if necessary, touch up as per paragraph 3.B.2.c.

CAUTION

MAKE SURE END-FITTINGS AND INTERIOR OF

THE TURNBUCKLE ARE COATED WITH MASTINOX SEALANT (4) BEFORE INSTALLATION OF THE TURNBUCKLE.

Install the tail rotor control turnbuckles (a) or (1) (refer to paragraph 1.K.) (Figure 1).

Safety the turnbuckles as per MTC Work Card 20.02.06.408.

3.C. IDENTIFICATION Identification of this document:

Record compliance with this document and the Revision number in the helicopter documents.

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:

Not applicable.

Maintenance instructions:

EUROCOPTER makes compliance with paragraph 3. of this ALERT SERVICE BULLETIN mandatory,at intervals not exceeding 12 months.

Revision 0 2013-03-14 Page 9/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub

Page 10OCROpen in PDF

→ EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

(1) or (a)

(1) or (a)

(4) Figure 1 Revision 0 2013-03-14 Page 10/11 Revision 1 2013-06-05 This document is available on the internet: www ocopter.com/techpub

Page 11OCROpen in PDF

• EUROCOPTER AN EADS COMPANY ASB No. SA330-05.98

4. APPENDIX Check for absence of corrosion or crack(s) on the turnbuckle tappings and middle holes: Paragraph 3.B.2.a.

Presence of NO corrosion or crack(s) on the YES turnbuckle tappings and middle holes?

Check for absence of corrosion or crack(s) on the external surface of the Replace the turnbuckle before resuming flights:

turnbuckles: Paragraph 3.B.2.b.1. Paragraph 3.B.2.d.

Presence of crack(s) on the YES external surface of the turnbuckles?

NO Check the depth of NO Presence of corrosion on the YES Paragraph 3.B.2.b.2. corrosion:

external surface of the turnbuckles?

NO Depth YES > 0.3 mm ?

Reinstall the turnbuckle: - Carry out corrosion treatment:

Paragraph 3.B.3. Paragraph 3.B.2.c.

- Reinstall the turnbuckle: Paragraph 3.B.3.

- Replace the turnbuckle within 6 months Resume flights.

Periodic check at intervals not exceeding 12 months:

Comply with Paragraph 3.

Revision 0 2013-03-14 Page 11/11 Revision 1 2013-06-05 This document is available on the internet: www.eurocopter.com/techpub