On this page
Text · 9OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b812892616fecc482994ea55952a6db1eeca994075381da203f396758d2e6238' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'b812892616fecc482994ea55952a6db1eeca994075381da203f396758d2e6238' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS
HELICOPTERS EASB
EMERGENCY
ALERT SERVICE BULLETIN SUBJECT: DOORS - Side stairway door Check for correct locking of the side stairway door For the attention of AIRCRAFT Version(s) CONCERNED NUMBER Civil Military SA330 52.16 Ca, Jm, L, Sm, AS332 52.00.49 C, L, L1, L2 B1, M, M1, AS532 52.00.23 U2, UL EC225 52A014 LP EC725 52A012 AP Revision No. Date of issue Revision 0 2014-11-03 Summary:
Check of the side stairway door locking safety mechanism.
Compliance:
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 0 2014-11-03 Page 1/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment All helicopters equipped with the side stairway door.
1.A.2. Non-installed equipment Side stairway door.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON During an AS532 check-out flight, the amber "DOOR" indicator light came on. Shortly afterwards, the side stairway door opened in flight, tearing off its attachment fittings. The door remained attached to the helicopter by the load compensator system cable. The helicopter landed without further consequences.
Investigations carried out by Airbus Helicopters identified the main cause which may result in the opening of the side stairway door in flight.
Shortly before the incident, the side stairway door of the helicopter involved had been painted. The paint blocked the sliding of the external door handle on the casing of the lock assembly.
The door handles were in the closed position but the locking of the door was not secured by the lock's internal claw engagement system. In-flight vibrations led to the opening of the side stairway door.
NOTE The locking safety of the side stairway door is ensured by a claw inside the lock casing.
The claw engagement system operates due to the action of a return spring during the short travel (≥ 2 mm, .078 in) of the external and internal door handles.
As the in-flight loss of the side stairway door is an unsafe condition, Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.
1.D. DESCRIPTION Compliance with this ALERT SERVICE BULLETIN consists in checking for correct operation of the side stairway door locking safety mechanism.
Revision 0 2014-11-03 Page 2/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
1.E. COMPLIANCE
1.E.1. Compliance at the works Not applicable.
1.E.2. Compliance in service The work on the helicopter is to be performed by the operator.
1.E.2.a. Helicopters/installed equipment:
For helicopters delivered before October 31, 2014:
Comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN as part of the Before First Flight (BFF) of the day inspection:
- If the safety mechanism of the handle of the side stairway door locks automatically, return the helicopter to flight configuration.
- If the safety mechanism of the handle of the side stairway door does not lock automatically:
Comply with paragraph 3.B.2. Before First Flight of the day (BFF).
And, For all helicopters:
Comply with paragraph 3.B.1. after each painting operation on the side stairway door and/or external door handle.
- If the safety mechanism of the handle of the side stairway door locks automatically, return the helicopter to flight configuration.
- If the safety mechanism of the handle of the side stairway door does not lock automatically, comply with paragraph 3.B.2. Before First Flight of the day.
1.E.2.b. Non-installed equipment:
Comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN before installing the side stairway door on the helicopter.
- If the safety mechanism of the handle of the side stairway door locks automatically, leave as is.
- If the safety mechanism of the handle of the side stairway door does not lock automatically, comply with paragraph 3.B.2. before installing the side stairway door on the helicopter.
Revision 0 2014-11-03 Page 3/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
1.F. APPROVAL Approval of this document:
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on November 03, 2014 under the authority of EASA Design Organization Approval No. 21J.056 for helicopters of civil versions subject to an Airworthiness Certificate.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on November 03, 2014 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.
The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on November 03, 2014 by the Airbus Helicopters Airworthiness Department for export military versions.
1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:
Qualification:
- 1 Mechanical Engineering Technician, Or,
- 1 Pilot appropriately trained and certified, in accordance with the local regulations in force.
The time for the operations is given for information purposes, for a standard configuration.
Time for the operations:
- 5 minutes to comply with paragraph 3.B.1.
- Approximately 30 minutes to comply with paragraph 3.B.2.
1.H. WEIGHT AND BALANCE Not affected.
1.I. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.
Revision 0 2014-11-03 Page 4/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:
Standard Practices Manual (MTC):
- MTC: 20.08.05.103: General rules applicable to aircraft - Monitoring of parts in operation - marking - service life customization
1.L. DOCUMENTS AFFECTED Not applicable.
1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Not applicable.
Revision 0 2014-11-03 Page 5/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Not applicable.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Not applicable.
2.D. MATERIAL TO BE RETURNED Not applicable.
Revision 0 2014-11-03 Page 6/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL Not applicable.
3.B. OPERATIONAL PROCEDURE
3.B.1. Check for correct operation of the locking safety mechanism (Figure 1)
- Close the side stairway door (a).
- Set the external door handle (b) to the horizontal "Door closing" position (Detail A, Figure 1).
- Make sure that the safety mechanism locks automatically: (Details C and D, Figure 1):
• Without any action by the operator, the external door handle (b) travels over a distance (R) greater than or equal to (2) 2 mm (.078 in).
NOTE 1 The travel (R) can be measured using a rule (off the shelf).
- Make sure that the locking safety mechanism prevents the external door handle (b) from turning toward the "Door opening" position (Detail B, Figure 1).
NOTE 2 Do not push the external door handle (b) to test the locking safety. Axial thrust applied to the external door handle (b) unlocks the safety mechanism.
- Interpret the results as per paragraph 1.E.2.
3.B.2. Reconditioning the locking safety mechanism (not shown)
- Move the external door handle (b) from the "Locked" to the "Unlocked" position until the safety mechanism locks automatically.
- If it is impossible to recondition the locking safety mechanism by moving the door handle:
Contact the Airbus Helicopters Support and Services Department:
Tel.: + 33 (0)4.42.85.99.29 Fax: + 33(0)4.42.85.99.66 E-mail: Airframe.Technical-Support@airbus.com Revision 0 2014-11-03 Page 7/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB
3.C. IDENTIFICATION Identification of this document:
Record compliance with this ALERT SERVICE BULLETIN Revision 0 in the helicopter documents.
Identification of modifications on the equipment:
Record compliance with this ALERT SERVICE BULLETIN on the side stairway door as per MTC Work Card 20.08.05.103.
NOTE 3 Record compliance with this ALERT SERVICE BULLETIN next to the identification plate of the side stairway door.
Then, After each door painting operation:
Record compliance with paragraph 3.B.1. in the helicopter documents and, if necessary, record compliance with paragraph 3.B.2.
And, Record compliance with this ALERT SERVICE BULLETIN on the side stairway door as per MTC Work Card 20.08.05.103.
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2014-11-03 Page 8/9 This document is available on the internet: www.airbushelicopters.com/techpub
AIRBUS
HELICOPTERS EASB a C-D Q a
• b Locking safety test:
Impossible to move the handle PARA ABRIR EMPUJAR Y GIRAR toward "Door opening" "Locked" position of the safety mechanism "Unlocked" position of the safety mechanism R = R1 - R2 ≥ 2 mm (.078 in) R1 R2 -
THRUST MANUAL OF THE b b PRESSURE SPRING CLOSED a a Figure 1: Check for locking of the safety mechanism Revision 0 2014-11-03 Page 9/9 This document is available on the internet: www.airbushelicopters.com/techpub