Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB SA330-52.17 Revision 0 · 36 pages · 1.9 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0785 (document 0002) · AD 2021-19-16

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
SA330-52.17

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 36OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0785, the docket of AD 2021-19-16. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '98fec4659f06e54e645d7c58d1f09fea86488f7036881d60f80e416c70abce11'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 Civil version (s): J Military version(s): L, um, Sm

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE DOORS - Side stairway door VIP door locking improvement Corresponds to modification 0727338 For the attention of Revision No. Date of issue Revision 0 2020-03-11 Summary:

The purpose of this ALERT SERVICE BULLETIN is to improve the locking system of the LH stairway door to make sure that the door is correctly locked when it is in a closed and locked position. A direct visualization system is also installed to allow the operator to visually check that the locking is correct.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

ASB SA330 52.17 Revision 0 2020-03-11 Page 1/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 1- PLANNING INFORMATION

CAUTION

THIS ALERT SERVICE BULLETIN IS WRITTEN

BASED ON THE ORIGINAL HELICOPTER

CONFIGURATION (AS DEFINED IN THE INDIVIDUAL INSPECTION LOG BOOK (RIC)).

IT ALSO TAKES INTO ACCOUNT ALL AIRBUS

HELICOPTERS APPROVED CONFIGURATION

CHANGES MADE AFTER DELIVERY,

IF AIRBUS HELICOPTERS WAS INFORMED THEM. IS THE RESPONSIBILITY

OF THE OPERATOR TO CHECK THE

COMPATIBILITY OF ANY MODIFICATIONS WITH THE CURRENT HELICOPTER CONFIGURATION. IF

MODIFICATIONS ARE NOT COMPATIBLE, IT IS

THE RESPONSIBILITY OF THE OPERATOR TO

DEFINE THE NECESSARY ADAPTATION WORK

AND HAVE THEM APPROVED BY THE AIR

TRANSPORT AUTHORITIES IN THE COUNTRY

CONCERNED, AND TO MAKE SURE THAT THEIR AIRWORTHINESS IS FOLLOWED UP.

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters which satisfy all of the following conditions:

- have embodied modification 0711166 (Stairway door at left hand side of fuselage),

- have not embodied modification 0727338 (VIP door locking improvement).

NOTE 1 Only helicopters POST MOD 0711166 are equipped with the optional VIP door, which is described as LH stairway door.

NOTE 2 Refer to the Individual Inspection Log Book (RIC AMS) and the Aircraft Log Book to identify the current modification status of the helicopter.

1.A.2. Non-installed equipment or parts

- LH stairway door assemblies P/N: 330A22-2400-0502.

- Outside handles P/N: 330A22-2443-20.

- Lock assemblies P/N: 330A22-2442-00.

- Control levers P/N: 330A22-2436-00.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2020-03-11 Page 2/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

•AIRBUS HELICOPTERS ASB No. SA330-52.17

1.C. REASON During an AS532 flight, the LH stairway door opened accidentally. Investigations showed that although the LH stairway door was in the closed position, the door lock was not completely engaged. Thus, Airbus Helicopters introduced modification 0728281 (VIP door locking mechanism improvement) through the following:

- ALERT SERVICE BULLETIN No. 52.00.52 for the AS332 helicopters,

- ALERT SERVICE BULLETIN No. 52.00.26 for the AS532 helicopters,

- ALERT SERVICE BULLETIN No. 52A017 for the EC225 helicopters.

Similarly, Airbus Helicopters introduces modification 0727338 on the SA330 helicopter family through this ALERT SERVICE BULLETIN to improve the locking system of the LH stairway door. A direct visualization system is also installed to allow the operator to visually check that the door lock is correctly engaged when the LH stairway door is in a closed and locked position.

Direct visualization system Door locking system LA stairway door assembly Revision 0 2020-03-11 Page 3/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 One of the improvements to the door locking system, among other design changes, is the removal of the bushing from the door lock. The bushing was identified as the root cause of the incorrect locking due to accumulation of paint between the bushing and the box. The function of the bushing, which has a slot for the locking pin (key) to engage, is now integrated directly in a new box design. A second spring is also installed on the outside handle to make sure that the lever of the locking mechanism is always engaged even if one of the springs is damaged. In addition, visual indicators on the locking mechanism allow immediate detection of any improper locking of the LH stairway door.

Stairway door lock assembly

PRE MOD POST MOD Spring 1 Box Spring 1 Box Indicator Visual Bushing Spring 2 Locking pin (Keys) Bushing

• Locking pin Opening OPEN Box Box Revision 0 2020-03-11 Page 4/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 The direct visualization system is installed by modifying the existing stop support box on the LH stairway door to install a visualization window. A colored fixed blanking cap and a colored flag marker are installed on the control lever. By viewing these colored visual indicators through the visualization window, the operator can visually check from the outside of the helicopter if the door lock is correctly engaged.

Direct visualization system

PRE MOD POST MOD Stop Stop support box support box Fixed Control blanking lever - cap Flag marker Control Visualization lever window Compliance with this ALERT SERVICE BULLETIN cancels the instructions in the EMERGENCY ALERT SERVICE BULLETIN No. 52.16 revision 1. This information will be officialized by revision 2 of the EMERGENCY ALERT SERVICE BULLETIN No. 52.16.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN modifies the LH stairway door, including:

- removal of the LH stairway door,

- replacement of stairway door lock, which includes transferring the barrel from the old stairway door lock to the new stairway door lock,

- installation of a direct visualization system, which includes:

cutting of the stop support box to create a visualization window, . replacement of the upper lock control lever,

• installation of a flag marker and a fixed blanking cap.

- installation of new internal and external labels,

- installation of the LA stairway door.

NOTE 3 Transferring the barrel from the old stairway door lock to the new stairway door lock allows the operator to use the old set of keys with the new stairway door lock.

Revision 0 2020-03-11 Page 5/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Not applicable.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

The work must be performed on the helicopter by the operator.

Comply with paragraph 3. except paragraphs 3.B.5. and 3.D. of this ALERT SERVICE BULLETIN, within 12 months from receipt of this ALERT SERVICE BULLETIN issued on the date indicated in the page footer.

Non-installed equipment or parts:

The work must be performed on non-installed equipment by the operator.

Before installing the LH stairway door assembly identified in paragraph 1.A.2. of this ALERT SERVICE BULLETIN, Airbus Helicopters recommends modifying stocks without exceeding 12 months from receipt of this ALERT SERVICE BULLETIN issued on the date indicated in the page footer.

On receipt of this ALERT SERVICE BULLETIN, discard stocks of outside handle P/N: 330A22-2443-20, lock assembly P/N: 330A22-2442-00 and control lever P/N: 330A22-2436-00 as per paragraph 3.B.5. of this ALERT SERVICE BULLETIN.

The build-up of stocks for compliance with this ALERT SERVICE BULLETIN is left to the operator's initiative.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0727338 revision B, which was approved on May 22, 2019 by EASA for civil version helicopters subject to an Airworthiness Certificate.

The information or instructions relate to modification 0727338, which was approved on June 04, 2019 by the Airbus Helicopters Airworthiness Department for export military versions.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 11, 2020 under the authority of EASA Design Organization Approval No.21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on March 11, 2020 by the Airbus Helicopters Airworthiness Department for export military versions.

Revision 0 2020-03-11 Page 6/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:

Qualification: - 1 Mechanical Technician,

- 1 Airframe Technician.

• Toniguinged Man hours are indicated for refere. The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter Estimated Man-hours: - 6 hours for the Mechanical Technician,

- 2 hours for the Airframe Technician.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at 1 day (excluding drying time for paint and curing time for sealing compound).

1.H. WEIGHT AND BALANCE The change in weight and moment is negligible.

1.l. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.

Maintenance Manual (MDE):

MDE: 52.12.401: Removal - Installation of the side stairway door MDE: 52.12.601: Checking the side stairway door Standard Practices Manual (MTC):

MTC: 20-02-05-404: Assembly by screws and nuts - Joining MTC: 20-02-06-409: Safetying with Loctite compound - Safetying and locking assemblies MTC: 20-04-01-102: Use of cleaning products on individual parts and on helicopters - Cleaning MTC: 20-04-04-403: Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment before painting MTC: 20-04-05-402: Application of Epoxy primer P05 - P20 - Paint and primer application procedure MTC: 20-04-05-422: Application of polyurethane finish paint (1500-M) - Paint and primer application MTC: 20-05-01-212: Implementation of Sealing compound CM 6232 - General sealing procedures MTC: 20-07-01-201: Handling of helicopters in a hangar and in a prepared area - Handling Revision 0 2020-03-11 Page 7/36 This document is available on the Internet: www.airbu elicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-401: Instructions applicable during maintenance operations on mechanical assemblies - MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-102: Rules in force applicable for repair and maintenance of aircraft - General rules MTC: 20-08-05-103: Monitoring of parts in operation - marking - service life customization - General rules MTC: 20-09-02-901: Preservation and packing methods of airborne equipment - Preservation Documents in the Appendix will not be updated.

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF NOT, IT IS

THE OPERATOR'S RESPONSIBILITY TO OBTAIN

THE DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.

Publications already updated:

This modification has been integrated into the following manuals:

- Index of Modifications (SIM),

- Maintenance Manual (MDE).

These documents are distributed as per subscription.

Publications to be updated:

Revision of the Illustrated Parts Catalog (IPC) will be updated on the customer's order.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

PRE MOD and POST MOD LH stairway door assemblies are not interchangeable.

PRE MOD and POST MOD outside handles are not interchangeable.

PRE MOD and POST MOD lock assemblies are not interchangeable.

PRE MOD and POST MOD control levers are not interchangeable.

Mixability:

Not applicable.

Revision 0 2020-03-11 Page 8/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price Components will be delivered free of charge by the Airbus Helicopters Puma Program Department. To know the pricing conditions, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Delivery lead times will be indicated by Sales and Customer Relations Department on the operator's request.

Procurement Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopters to be modified.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96.

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2020-03-11 Page 9/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

For each helicopter, order the following:

- quantity 01 stairway door lock P/N: 330A22-2442-01,

- quantity 01 kit P/N: 332A08-1666-0572,

- quantity 01 kit P/N: 332A08-0907-0273.

New Old Key Word Qty P/N Item P/N → Instruction Stairway door lock 1 330A22-2442-01 1 330A22-2442-00 Discard Screw ref For reference only 1a For ref only Square drive ref For reference only 1b For ref only Cylinder ref For reference only 1c For ref only Box ref For reference only 1d For ref only Ball end fitting ref For reference only 1e For ref only Lever ref For reference only 1f For ref only Internal handle ref For reference only 1g For ref only Cover ref For reference only 1h For ref only Pin ref For reference only 1j For ref only VIP door lock system 332A08-1666-0572 retrofit kit, including:

External handle 330A22-2443-21 2 330A22-2443-20 Discard Upper cover 332A22-0332-20 3 Lower cover 1 332A22-0333-20 4 Window ref For reference only 4a For ref only Spring support 332A22-0330-20 5 Spring 1 330A22-2494-20 6 Shim 330A22-2411-46 7 Snap ring 23201AM0160T 8 Flat washer 5 23111AG050LE Screw 5 22271BC050014L 10 Hex. self-locking nut 2 ASN52320BH050N 24 Spring pin 3 NSA5319-05-025 43 NOTE 3 Spring pins (43) are required only if there is a need to remove the internal handle (1g) as per paragraph 3.B.2.e. or Appendix 4.B.2.

Revision 0 2020-03-11 Page 10/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 New Old Key Word Qty P/N Item P/N → Instruction VIP door lock system direct 332A08-0907-0273 visual kit, including:

Plexiglass 1 332A22-0326-20 11 Sight well 332A22-0326-01 12 Fixed blanking cap 1 332A22-0326-02 13 Flag marker control 1 332A22-0326-03 14 330A22-2436-00 Discard lever assembly Ball end fitting ref For reference only 14a For ref only Adjustment shim 1 332A22-0326-22 15 Flag marker 332A22-0326-04 16 Countersunk screw 2 22256BC040004L 17 Hex. head bolt 2 22208BC040014L 18 Special wide head bolt 4 A0164TK040S010X 19 Hex. self-locking nut 6 ASN52320BH040N 20 Flat washer 6 23111AG040LE 21 Washer 2 23112AG04OLE 22 Hex. self-locking nut 1 ASN52320BH050N 24 Spring pin 2 NSA5319-05-025 43 Equipment or parts to be ordered separately:

As per Work Cards used in this ALERT SERVICE BULLETIN and, as required, list below:

Key Word Qty New P/N Item Old P/N → Instruction Ext. white label (EN) 1 332A00-0649-AG 25 Ext. white label (FR) 332A00-0649-AH 26 Int. white label (EN) 332A00-0649-AJ 27 Int. white label (FR) 332A00-0649-AK 28 Grip 1 330A22-2491-23 29 NOTE 4 Labels (25) and (27) are in English. Labels (26) and (28) are in French.

Revision 0 2020-03-11 Page 11/36 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA330-52.17 NOTE 5 Internal handle (1g) is chrome-plated. If required, it may be replaced with a custom-painted grip (29). When placing order for the grip (29), specify the custom paint requirements as per helicopter configuration.

Consumables to be ordered separately:

As per Work Cards used in this ALERT SERVICE BULLETIN and, as required, list below:

Key Word Qty P/N CM Item Grease 1 can DCSEA354 CM 115 30 Adhesive 1 pc ASNA4018 CM 683 31 P05 epoxy primer 1 can DHS186-111.20 CM 487 32 Green paint 1 L ECS2018.30-2455 CM 4186 33 Red paint 1 L ECS2018.40-2801 CM 4185 34 Chemical conversion 1 pc ECS2338.10 CM 316 35 material Sealing compound 1 kit ECS6046-1198 CM 6232 36 The consumables can be ordered separately from the following companies:

Aviatec global aviation Website: www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193 8803 630 Fax: +33 1.34.46.45.26 or +49 4193 8803 699 AOG: +49 4193 8803 660 AOG email: aog@aviatec.aero Gaches chimie Website: www.gaches.com Telephone: +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG email: marketplace@gaches.com BDSI Website: https://www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG email: AOGdesk@Boeingdistribution.com NOTE 6 The equivalent part numbers of the consumables can vary between the companies listed above.

Equipment or parts required for non-installed components:

Order as required material listed in paragraph 2.C. "Kits to be ordered for one helicopter or one assembly" of this ALERT SERVICE BULLETIN.

Special tools:

As per Work Cards used in this ALERT SERVICE BULLETIN.

Revision 0 2020-03-11 Page 12/36 This document is available on the Internet: www.a helicopters.com/techpub/