Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters ASB No. SA365-65.53 Rev 0 · 13 pages · 730 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0517, the docket of AD 2022-10-09. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-0517 (document 0002) · AD 2022-10-09

Manufacturer
Airbus Helicopters
Type
Alert Service Bulletin
Number
SA365-65.53

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 13OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0517, the docket of AD 2022-10-09. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '01b26df849e991f2d2db5bb20bf23dd7d5a1cb2c51c72a2dfd96288b4d785a3d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53 Civil version(s): C1, C2, C3

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE TAIL ROTOR DRIVE - Main gear box Upgrade of non-electrical magnetic plug at pump intake of the MGB Corresponds to modification 0763B19 For the attention of Revision No. Date of issue Revision 0 2020-05-28 Summary:

As a precautionary measure and an enhancement to safety, Airbus Helicopters makes modification 0763B19 mandatory through this ALERT SERVICE BULLETIN to improve the performance in collecting metal particles in the main gear box (MGB). This modification replaces the non-electrical magnetic plug at the pump intake of the MGB with a new non-electrical magnetic plug. The new non-electrical magnetic plug has a higher performance, due to a longer magnetic part and a higher capacity to capture metal particles.

Compliance:

Compliance with this ALERT SERVICE BULLETIN is mandatory.

ASB SA365 65.53 Revision 0 2020-05-28 Page 1/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts MGB of all part numbers (P/N) which satisfy any of the following conditions:

- equipped with non-electrical magnetic plug P/N: 365A32-1711-00 at the MGB pump intake,

- have not embodied modification 0763B19.

PRE MOD POST MOD Non-electrical magnetic plug New non-electrical magnetic plug P/N: 365A32-1711-00 P/N: 365A32-7701-00 MGB pump MGB pump intake intake NOTE 1 Refer to the Log Card (FM) to identify the current modification status of the equipment.

1.A.2. Non-installed equipment or parts

- MGB as listed in paragraph 1.A.1.,

- Non-electrical magnetic plug P/N: 365A32-1711-00.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2020-05-28 Page 2/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

1.C. REASON Airbus Helicopters is proactively reassessing its policy with regard to particle detection in the MGB for its entire product range. A series of analysis was conducted on the MGB of the Dauphin family.

As a precautionary measure and an enhancement to safety, Airbus Helicopters makes modification 0763B19 mandatory through this ALERT SERVICE BULLETIN to improve the performance in collecting metal particles in the MGB. This modification replaces the non-electrical magnetic plug at the pump intake of the MGB with a new non-electrical magnetic plug. The new non-electrical magnetic plug has a higher performance, due to a longer magnetic part and a higher capacity to capture metal particles.

PRE MOD POST MOD Non-electrical magnetic plug New non-electrical magnetic plug P/N: 365A32-1711-00 P/N: 365A32-7701-00 Airbus Helicopters makes compliance with Revision 0 of this ALERT SERVICE BULLETIN mandatory.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN replaces the non-electrical magnetic plug at the pump intake of the MGB with a new non-electrical magnetic plug.

NOTE 2 To replace the non-electrical magnetic plug, the MGB must first be drained. After the modification is completed, the MGB is filled again. A ground run-up is required to complete the filling task.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/installed equipment or parts:

Not applicable.

Non-installed equipment or parts:

Airbus Helicopters makes it mandatory to comply with the instructions of paragraph 3.B.5. of this ALERT SERVICE BULLETIN before the delivery of the MGB.

Revision 0 2020-05-28 Page 3/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

1.E.2. Compliance in service Helicopters/installed equipment or parts:

The work must be performed on the helicopter by the operator.

Comply with paragraph 3. except paragraphs 3.B.5. and 3.D. of this ALERT SERVICE BULLETIN within 110 flight hours (FH) or at the latest within 3 months from receipt of this ALERT SERVICE BULLETIN issued on the date indicated in the page footer.

Non-installed equipment or parts:

The work must be performed on the MGB by the operator.

Before installation on helicopter, modify stocks of the MGB as per paragraph 3.B.5. of this ALERT SERVICE BULLETIN without exceeding August 28, 2020.

The build-up of stocks of non-electrical magnetic plug P/N: 365A32-7701-00 for compliance with this ALERT SERVICE BULLETIN is left to the operator's initiative.

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 0763B19, which was approved on June 14, 1991 by Bureau Veritas for civil version helicopters subject to an Airworthiness Certificate.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on May 28, 2020 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following staff qualifications:

Qualification: 1 Mechanical Technician.

Specialist: 1 Pilot.

The Estimated Man-hours are indicated for reference purposes only and based on a standard helicopter configuration.

Estimated Man-hours: - 5 hours for the Mechanical Technician,

- 0.5 hour for the Pilot.

Estimated helicopter downtime is indicated for reference purposes only, based on a standard helicopter configuration.

Helicopter downtime is estimated at 1 day.

Revision 0 2020-05-28 Page 4/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

1.H. WEIGHT AND BALANCE There is no change in weight and moment.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The following documents are required for compliance with this ALERT SERVICE BULLETIN.

Maintenance Manual (MET):

MET: 12.00.601: Check of a magnetic component - Standard maintenance MET: 24.00.300: Instructions - Electrical power generating system MET: 65.00.300: General mechanical instructions - Rotor assemblies MET: 65.32.301: Routine Maintenance: Oil change: Draining and filling the M.G.B. - Engine

- Main gearbox coupling (main drive shaft) assembly Standard Practices Manual (MTC):

MTC: 20-02-06-402: Safetying with lockwire - Safetying and locking assemblies MTC: 20-02-08-410: Installation of seals on mechanical or hydraulic assemblies - Replacement of components on structure and mechanical assemblies MTC: 20-05-01-222: Application of PR 1771 B2 sealant - General sealing procedures MTC: 20-05-01-227: Application of jointing compound CA 1010 - General sealing procedures MTC: 20-07-01-201: Handling of helicopters in a hangar and in a prepared area - Handling MTC: 20-07-02-201: Helicopter parked in a repair shop - Safety instructions MTC: 20-07-03-401: Instructions applicable during maintenance operations on mechanical assemblies - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft MTC: 20-08-05-102: Rules in force applicable for repair and maintenance of aircraft - General rules applicable to aircraft MTC: 20-09-02-901: Preservation and packing methods of airborne equipment - Preservation Safety Information Notice (SIN):

SIN: 3069-S-63: Checking procedure for magnetic plug installation and locking - Main Rotor Drive Revision 0 2020-05-28 Page 5/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

1.L. OTHER AFFECTED PUBLICATIONS

CAUTION

TO COMPLY WITH THIS ALERT SERVICE

BULLETIN, THE OPERATOR MUST MAKE SURE

THAT ALL THE MAINTENANCE DOCUMENTS

REQUIRED FOR THE MAINTENANCE OF THIS INSTALLATION ARE AVAILABLE. IF NOT, IT IS THE

OPERATOR'S RESPONSIBILITY TO OBTAIN THE

DOCUMENTS FROM THE USUAL AIRBUS HELICOPTERS CONTACT.

Publications already updated:

This modification was integrated into the Maintenance Manual (MET).

This document is distributed as per subscription.

Publications to be updated:

Revision of the Illustrated Parts Catalog (IPC) will be updated on the customer's order.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

This ALERT SERVICE BULLETIN prohibits the installation of PRE MOD non-electrical magnetic plugs at the pump intake of POST MOD MGBs.

Mixability:

Not applicable.

Revision 0 2020-05-28 Page 6/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price The magnetic plug is free of charge.

For any information on the price of other components or for assistance, contact the Airbus Helicopters Network Sales and Customer Relations Department.

Availability Delivery lead times will be indicated by the Sales and Customer Relations Department on the operator's request.

Procurement The components will be delivered with special pricing conditions until May 28, 2021.

Order the required quantity from the Airbus Helicopters Network Sales and Customer Relations Department:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the helicopter to modify.

NOTE 2 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4.42.85.99.96

2.B. LOGISTIC INFORMATION Not applicable.

Revision 0 2020-05-28 Page 7/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Kits to be ordered for one helicopter or one assembly:

Key Word Qty New Item Old P/N P/N → Instruction Magnetic plug 1 365A32-7701-00 1 365A32-1711-00 Store Magnetic plug ref for reference only 1a For ref only mobile part Magnetic plug ref for reference only 1b For ref only receptacle O-ring 1 PS701-6006-126 2 Equipment or parts to be ordered separately:

Key Word Qty New P/N Item Old P/N → Instruction Lockwire 0.5 m EN3628-0,8 3 Consumables to be ordered separately:

As per Work Cards mentioned in this ALERT SERVICE BULLETIN and the list below:

Key Word Qty P/N Item G-361 grease 0.1 L DCSEA361 CM 149 5 Sealant 1 piece ECS2339-60 CM 6068 6 Interposition sealant 1 tube ECS7009 CM 518 7 The consumables can be ordered separately from the following companies:

Aviatec global aviation Gaches chimie Website: www.aviatec.net Telephone: +33 1.34.46.45.24 or +49 4193.8803.630 Fax: +33 1.34.46.45.26 or +49 4193.8803.699 AOG: +49 4193.8803.660 AOG email: aog@aviatec.aero Website: www.gaches.com Telephone: +33 5.61.31.64.45 Fax: +33 5.61.40.98.63 AOG email: marketplace@gaches.com BDSI Website: https://www.boeingdistribution.com Telephone: +1.305.925.2600 Fax: +1.305.507.7191 AOG: +1.305.471.8888 AOG email: AOGdesk@Boeingdistribution.com Revision 0 2020-05-28 Page 8/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53 NOTE 3 The equivalent part numbers of the consumables can vary between the companies listed above.

Special tools:

As per Work Cards mentioned in this ALERT SERVICE BULLETIN.

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2020-05-28 Page 9/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- As per Work Card 24.00.300 (MET), read and comply with general safety instructions on electrical power.

- As per Work Card 65.00.300 (MET), read and comply with general mechanical instructions on rotor assemblies.

- As per Work Card 20-07-01-201 (MTC), read and comply with instructions on handling of helicopters in a

- As per Work Card 20-07-02-201 (MTC), read and comply with instructions on helicopters parked in a repair shop.

- As per Work Card 20-07-03-401 (MTC), read and comply with instructions applicable during maintenance operations on mechanical assemblies.

- As per Work Card 20-08-05-102 (MTC), read and comply with rules in force applicable for repair and maintenance of aircraft.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Park the helicopter in a maintenance hangar.

CAUTION

BEFORE WORKING ON ELECTRICAL CIRCUITS, READ WORK CARD 24.00.300 (MET).

CAUTION

BEFORE WORKING ON MECHANICAL SYSTEM, READ WORK CARD 65.00.300 (MET).

CAUTION

WHEN WORKING ON MGB, BE CAREFUL NOT TO

SCRATCH OR DAMAGE THE MGB, OR DAMAGE ANY SYSTEMS ADJACENT TO THE MGB.

- Disconnect all electrical power sources.

- Install the appropriate access means.

- Remove and/or open all cowlings, panels and all equipment items to enable adequate access to the various work areas.

- Check the magnetic plug mobile part (a) for metal particles as per Work Card 12.00.601 (MET) (Figure 1, DETAIL A, PRE MOD).

- Drain the MGB (b) as per Work Card 65.32.301 (MET) (Figure 1).

Revision 0 2020-05-28 Page 10/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

3.B.2. Procedure

3.B.2.a. Removal of non-electrical magnetic plug (Figure 1)

- Push and turn by a quarter turn to remove the magnetic plug mobile part (a) from the magnetic plug receptacle (c) (DETAIL A, PRE MOD and DETAIL B).

- Cut and remove the lockwire (d) from the magnetic plug receptacle (c) (DETAIL B).

- Loosen and remove the magnetic plug receptacle (c) (DETAIL A, PRE MOD).

- Remove and discard the o-ring (e) from the magnetic plug receptacle (c) (DETAIL A, PRE MOD).

- Store the magnetic plug mobile part (a) and magnetic plug receptacle (c) as per Work Card 20-09-02-901 (MTC).

- Clean the area.

3.B.2.b. Installation of new non-electrical magnetic plug (Figure 1)

- Remove the magnetic plug mobile part (1a) from the magnetic plug receptacle (1b) of the magnetic plug (1) (DETAIL A, POST MOD).

- Install the o-ring (2) on the magnetic plug receptacle (1b) as per Work Card 20-02-08-410 (MTC).

- Lubricate the screw thread of the magnetic plug receptacle (1b) with grease (5).

- Apply a layer of interposition sealant (7) on the flat mating surface between the MGB (b) and the magnetic plug receptacle (1b) as per Work Card 20-05-01-227 (MTC) (DETAIL A, POST MOD).

- Install and tighten the magnetic plug receptacle (1b) on the MGB (b).

- Safety the magnetic plug receptacle (1b) on the MGB (b) with lockwire (3) as per Work Card 20-02-06-402 (MTC) (DETAIL C).

- Apply a bead of sealant (6) along the mating surfaces between the magnetic plug receptacle (1b) and the MGB (b) as per Work Card 20-05-01-222 (MTC) (DETAIL A, POST MOD).

CAUTION

MAKE SURE THAT MAGNETIC PLUG MOBILE PART (1a) IS CORRECTLY LOCKED AS PER SAFETY INFORMATION NOTICE NO. 3069-S-63 (SIN).

- Install the magnetic plug mobile part (1a) on the magnetic plug receptacle (1b) (DETAIL A, POST MOD and DETAIL C).

3.B.3. Final steps

- Fill the MGB (b) as per Work Card 65.32.301 (MET) (Figure 1).

- Clean and restore the work zones and helicopter as per Work Card 20-07-03-408 (MTC).

- Install again or close all cowlings, panels and equipment removed and/or opened during preliminary steps (paragraph 3.B.1. of this ALERT SERVICE BULLETIN).

- Remove the access means.

- Connect all electrical power sources.

- Set the helicopter to flight condition.

3.B.4. Ground run-up / flight test Perform a ground run-up after filling of the MGB as required in the Work Card 65.32.301 (MET) used in this ALERT SERVICE BULLETIN.

Revision 0 2020-05-28 Page 11/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. SA365-65.53

3.B.5. Work steps for non-installed equipment or parts Stock retrofitting Replace the non-electrical magnetic plug on the MGB listed in paragraph 1.A.2., as per paragraph 3.B.2. of this ALERT SERVICE BULLETIN.

Stock replacement, stock discard, and stock build-up The build-up of stocks of non-electrical magnetic plug P/N: 365A32-7701-00 is incumbent on the Operator.

3.C. COMPLIANCE CONFIRMATION Compliance with this document:

- Record full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the Log Card (FM) as per Work Card 20-08-05-101 (MTC).

- Please confirm compliance with this ALERT SERVICE BULLETIN:

QR-Code or hypertext link NOTE The recording of compliance with this ALERT SERVICE BULLETIN in the R-Tex tool does not replace the recording in the helicopter documents.

ASB SA365 65.53 Tracking of modifications in the documentation:

Record modification 0763B19 and the ALERT SERVICE BULLETIN number on the Log Card (FM) of the MGB as per Work Card 20-08-05-101 (MTC).

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:

Not applicable.

Maintenance instructions:

Scheduled Refer to Maintenance Program (PRE) and Airworthiness Limitations (5.99), in effect.

Unscheduled Refer to the Maintenance Manual (MET) revision 40 of date code 07-19, or newer revision.

Revision 0 2020-05-28 Page 12/13 This document is available on the Internet: www.airbushelicopters.com/techpub/