Service bulletin · Eurocopter

No revision namedAirbus Helicopters ASB GAZ-01.36 Rev 0 · 13 pages · 410 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1165, the docket of AD 2021-08-05. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-1165 (document 0004) · AD 2021-08-05

Manufacturer
Airbus Helicopters
As issued by
Eurocopter
Type
Service Bulletin
Number
01.36

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 13OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2020-1165, the docket of AD 2021-08-05. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'fee6c08aeee59aaa69155d3ebc50eb1c2264acc863b79b0783fde7aa7a25b092'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36 Civil versions: J, G Military versions: B, F, H, L, L1, M, Ma, M1

ALERT SERVICE BULLETIN

CORRECTIVE MEASURE LIMITATIONS - Tail Rotor Hub Introduction of a new part number and re-identification of the equipped blades of the Tail Rotor Hub Corresponds to modification 076527 ATA : 65 For the attention of Revision No. Date of issue Revision 0 2018-12-14 Summary:

As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a new part number for these equipped blades.

This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life Mainted or a he Senice Life Limit (TV / SLL) of the equipped blades mentioned in Master Servicing Manual (PRE or MAT/8702).

Compliance:

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

Revision 0 2018-12-14 Page 1/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts SA341/SA342 helicopters, versions B or J or G or B or F or H or L or L1 or M or Ma or M1, with equipped blades P/N 341A335130.04 whose serial numbers are listed in Appendix 4.A., NOTE 1 Refer to the Log Card of the Tail Rotor Hub (TRH) to identify the actual modification status of the helicopter.

1.A.2. Non-installed equipment or parts

- Equipped blade P/N 341A335130.04 whose serial numbers are listed in Appendix 4.A.

- Tail Rotor Hub P/N 341A335200.02 equipped with at least one blade P/N 341A335130.04.

P/N Serial number NOTE 2 The part number and serial number of the equipped blade can be found on:

- the equipped blade,

- Form1 for the equipped blade,

- the Tail Rotor Hub Log Card.

The figure above is provided for reference, to show the location of the part number and serial number on an equipped blade.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

Revision 0 2018-12-14 Page 2/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

1.C. REASON As the manufacturing process for the equipped blades has changed, Airbus Helicopters has introduced a new part number for these equipped blades.

This ALERT SERVICE BULLETIN makes their re-identification mandatory, without affecting the Service Life Limit (TV / SLL) of the Equipped Blades mentioned in Master Servicing Manual (PRE or MAT/8702).

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- checking the part number of the equipped blades of the Tail Rotor Hub (341A335130.04 + serial number) and the associated Tail Rotor Hubs,

- completing the Tail Rotor Hub Log Card,

- re-identifying the equipped blades of the Tail Rotor Hubs concerned.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Helicopters/ Installed equipment or parts:

Not applicable.

Non-installed equipment or parts:

Before delivery of the equipped blades refer to Form1 to check the serial part number and the serial numbers of the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

- for the serial numbers concerned:

• comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN, . edit a new Form 1.

Before delivery of the Tail Rotor Hub refer to log card for the Tail Rotor Hub to check the part number and the serial numbers of the equipped blades. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

- for the serial numbers concerned, Airbus Helicopters makes compliance with paragraph 3. of this ALERT SERVICE BULLETIN mandatory.

1.E.2. Compliance in service Helicopters/installed equipment or parts:

Airbus Helicopters makes compliance with this ALERT SERVICE BULLETIN mandatory.

The work on the helicopter is to be performed by the operator.

Revision 0 2018-12-14 Page 3/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

- Within 12 months from receipt of this ALERT SERVICE BULLETIN, issued on the date indicated in the page footer, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of the installed equipped blades. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

. Completion of the documentation .. For the serial numbers concerned, comply with paragraph 3.B.1. of this ALERT SERVICE BULLETIN .. For the serial numbers not concerned, no additional action is required.

- No later than the next disassembly of the Tail Rotor Hub:

. Re-identification of the equipped blades .. For the serial numbers concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.

Non-installed equipment or parts:

For an equipped blade alone:

- Before installation, refer to Form 1 to check the part number and the serial number of the equipped blades in stock. Compare the serial number of the equipped blade with the list of serial numbers in Appendix 4.A., to determine whether it is concerned:

• for the serial number concerned, comply with paragraph 3.B.2. of this ALERT SERVICE BULLETIN.

For Tail Rotor Hub:

- Before installation, refer to the Tail Rotor Hub Log Card to check the part number and the serial numbers of the equipped blades in stock. Compare the serial numbers of the equipped blades with the list of serial numbers in Appendix 4.A. to determine whether they are concerned:

• for the serial numbers concerned, comply with paragraph 3. of this ALERT SERVICE BULLETIN.

Revision 0 2018-12-14 Page 4/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

1.F. APPROVAL Approval of modifications:

The information or instructions relate to modification 076527 which was approved on November 30, 2018 by the EASA for helicopters of civil versions subject to an Airworthiness Certificate.

The information or instructions relate to modification 076527 which was approved on December 14, 2018 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The information or instructions relate to modification 076527 which was approved on December 14, 2018 by the Airbus Helicopters Airworthiness Department for export military versions.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on December 14, 2018 under the authority of EASA Design Organization Approval No. 21J.700 for civil version helicopters subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision O was approved on December 14, 2018 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on December 14, 2018 by the Airbus Helicopters Airworthiness Department for export military versions.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualification:

Qualification:

- 1 Mechanical Technician.

The time for the operations is indicated for reference, for a standard configuration.

Time for the operation:

- Approximately 30 minutes for the Mechanical Technician (for an equipped blade removed).

1.H. WEIGHT AND BALANCE Not applicable.

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

Revision 0 2018-12-14 Page 5/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:

MTC: 20.02.07.403: Use of Vernelec 43022 varnish - Electrical bonding, MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning, MTC: 20.04.04.403: Touch-up of protective treatment with ALODINE 1200 - Surface treatment before painting, MTC: 20.08.05.101: Drafting and updating the Log Card (FM) General rules applicable to aircraft, MTC: 20.08.05.103: Monitoring of parts in operation - marking - service life customization - General rules applicable to aircraft, MTC: 20.60.00.401: General Recommendations - Blades standard practices, MDE: Maintenance Manual, PRE or MAT/8702: Master Servicing Manuel.

1.L. OTHER AFFECTED PUBLICATIONS The modification will be integrated into the followings manuals:

- PRE - Section 5.99 (for versions J and G),

- PRE - Section 5.11.01 (for versions H, L1 and L),

- MAT/8702 (for versions B, F, M, Ma and M1).

These documents will be issued again at a later date.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Interchangeability:

Tail Rotor Hub equipped blades P/N 341A335130.04 and P/N 341A335130.06 are interchangeable.

Mixability:

Mixing Tail Rotor Hub equipped blades P/N 341A335130.04 and P/N 341A335130.06 is permitted.

Revision 0 2018-12-14 Page 6/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Not applicable.

2.B. LOGISTIC INFORMATION Not applicable.

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Consumables to be ordered separately:

As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:

Designation Qty Consumable P/N Item Cleaning agent AIR METHYL ETHYL KETONE 217 Chemical transformation agent A/R ALODINE1200 316 2 Varnish A/R ECS2228.10 514 3 The products can be ordered separately from the company KLX AEROSPACE SOLUTIONS.

Internet address: https://www.klxaerospace.com/klxaero/ Telephone: +1.305.925.2600 AOG: +1.305.471.8888 Special tools:

As per the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:

Designation Qty Tool P/N or equivalent Item Vibration scriber Commercial reference ZZ

2.D. EQUIPMENT OR PARTS TO BE RETURNED Not applicable.

Revision 0 2018-12-14 Page 7/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Read and comply with the general instructions concerning standard practices applicable to blades as per Work Card 20.60.00.401 (MTC).

3.B. WORK STEPS NOTE The serial number of an equipped blade remains unchanged following the application of this ALERT SERVICE BULLETIN.

3.B.1. Fill in the Tail Rotor Hub Log Card

- On the Log Card:

• cross out the part number of the equipped blade, leaving it legible, . note the new part number,

• record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.

3.B.2. Re-identification of the equipped blades

- Clean the area containing the part number and serial number of the equipped blades using the cleaning agent (1) as per Work Card 20.04.01.102 (MTC).

- Using a vibration scriber (zz) and as per Work Card 20.08.05.103 (MTC):

. cross out the part number 341A335130.04, leaving it legible, . mark the new part number 341A335130.06 under the serial number.

- Protect the vibration scribed zones using chemical conversion material (2) as per Work Card

20.04.04.403 (MTC).

- Apply varnish (3) as per Work Card 20.02.07.403 (MTC).

Equipped blade Serial number 341A 33 5130.06 2 3 Figure 1

- Record compliance with this ALERT SERVICE BULLETIN as per paragraph 3.C.

Revision 0 2018-12-14 Page 8/13 This document is available on the Internet: www.airbus :opters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

3.C. COMPLIANCE CONFIRMATION Compliance with this document:

- For installed equipment or parts:

When complying with paragraph 3.B.1.:

. record compliance with paragraph 3.B.1. of this ALERT SERVICE BULLETIN, with the revision number on the Tail Rotor Hub Log Card.

. note: « paragraph 3.B.2. of the ALERT SERVICE BULLETIN No. 01.36 must be complied with mandatorily during the next disassembly of the Tail Rotor Hub» on the Tail Rotor Hub Log Card.

When complying with paragraph 3.B.2.:

• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number on the Tail Rotor Hub Log Card

- For non-installed equipment or parts:

• record complete compliance with this ALERT SERVICE BULLETIN, with the revision number, on the Tail Rotor Hub Log Card.

Identification of modifications on equipment or parts:

Identify the equipped blades of the Tail Rotor Hub using the table below and Work Card 20.08.05.103 (MTC):

Designation Former P/N New P/N MOD Type of marking Equipped blade 341A335130.04 341A335130.06 - Vibration scribing Revision 0 2018-12-14 Page 9/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:

Not applicable.

Maintenance instructions:

Refer to the Master Servicing Manual (PRE or MAT/8702) in effect.

Refer to the Maintenance Manual (MDE) in effect.

For versions J and G:

The deadlines for new part numbers for the equipped blades on the Tail Rotor Hub in the Airworthiness Limitations Section 5.99 of the Master Servicing Manual (PRE) are identical to the former part numbers. The Airworthiness Limitations Section 5.99 of the Master Servicing Manual (PRE) will incorporate the new part numbers as part of a future revision.

For versions H, L1 and L:

The deadlines for new part numbers for the equipped blades on the Tail Rotor Hub in the Airworthiness Limitations Section 5.11.01 of the Master Servicing Manual (PRE) are identical to the former part numbers.

The Airworthiness Limitations Section 5.11.01 of the Master Servicing Manual (PRE) will incorporate the new part numbers as part of a future revision.

For versions B, F, M, Ma and M1:

The deadlines for new part numbers for the equipped blades on the Tail Rotor Hub in the MAT/8702 are identical to the former part numbers. The MAT/8702 will incorporate the new part numbers as part of a future revision.

Revision 0 2018-12-14 Page 10/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36

4. APPENDIX

4.A. Tail Rotor Hub Equipped blade (P/N) 341A335130.04 Serial numbers (S/N) M67587 M67631 M67677 M67721 M67764 M67800 M67588 M67632 M67679 M67722 M67766 M67801 M67590 M67634 M67680 M67724 M67767 M67802 M67591 M67636 M67681 M67725 M67768 M67803 M67596 M67637 M67687 M67726 M67769 M67804 M67597 M67639 M67688 M67727 M67770 M67805 M67598 M67641 M67689 M67728 M67771 M67806 M67599 M67642 M67690 M67729 M67772 M67807 M67600 M67644 M67692 M67732 M67773 M67808 M67604 M67645 M67693 M67733 M67774 M67811 M67605 M67646 M67694 M67734 M67775 M67814 M67606 M67647 M67697 M67736 M67776 M67815 M67608 M67648 M67698 M67738 M67777 M67816 M67609 M67649 M67699 M67739 M67778 M67817 M67610 M67650 M67700 M67740 M67779 M67818 M67611 M67651 M67701 M67743 M67780 M67819 M67612 M67652 M67702 M67747 M67781 M67820 M67613 M67656 M67703 M67748 M67782 M67821 M67614 M67657 M67704 M67749 M67783 M67823 M67615 M67658 M67705 M67750 M67784 M67824 M67616 M67659 M67706 M67751 M67785 M67825 M67617 M67660 M67707 M67752 M67786 M67826 M67618 M67661 M67710 M67753 M67787 M68735 M67619 M67662 M67711 M67754 M67788 M68738 M67620 M67663 M67712 M67755 M67789 M68739 M67621 M67664 M67713 M67756 M67790 M68742 M67622 M67667 M67714 M67757 M67791 M68746 M67625 M67668 M67715 M67758 M67793 M68747 M67626 M67669 M67716 M67759 M67794 M68748 M67627 M67670 M67717 M67760 M67796 M68750 M67628 M67671 M67718 M67761 M67797 M68752 M67629 M67672 M67719 M67762 M67798 M68753 M67630 M67676 M67720 M67763 M67799 M68754 Revision 0 2018-12-14 Page 11/13 This document is available on the Internet: www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS ASB No. GAZ-01.36 Serial numbers (S/N) M68755 M68820 M68865 M68927 M69009 M69083 M68759 M68821 M68868 M68929 M69010 M69086 M68760 M68822 M68872 M68930 M69014 M69090 M68761 M68825 M68873 M68932 M69019 M69092 M68762 M68826 M68874 M68933 M69020 M69095 M68763 M68827 M68875 M68934 M69022 M69098 M68765 M68828 M68876 M68935 M69023 M69104 M68766 M68829 M68882 M68936 M69026 M69116 M68768 M68830 M68883 M68937 M69027 M69118 M68769 M68831 M68884 620691 LZ169W M68771 M68832 M68886 M69031 M69122 M68772 M68834 M68888 M68944 M69032 M69124 M68774 M68835 M68889 M68945 M69033 M69125 M68776 M68836 M68893 069W M69128 M68779 M68838 M68894 M69035 M69129 M68781 M68840 M68895 M68951 M69037 M69138 M68782 M68841 M68896 M68961 M69039 M69140 M68783 M68842 M68898 M68965 M69040 M69141 M68784 M68843 M68899 M68968 M69144 M68786 M68844 M68900 M68971 M69146 M68787 M68845 M68903 M68974 10691 M69147 M68790 M68846 M68904 M68978 M69045 M69149 M68792 M68847 M68908 M68981 M69047 M69150 M68793 M68848 M68909 M68984 M69048 M69151 M68795 M68849 M68910 M68985 60690 M69153 M68797 M68850 M68912 M68986 M69050 M69154 M68798 M68851 M68914 M68992 M69052 M69155 M68800 M68853 M68915 M68995 M69053 M69156 M68802 M68854 M68917 M68996 M69054 M69157 M68803 M68855 M68918 M68997 M69059 M69160 M68805 M68856 M68919 M68998 M69061 M69161 M68806 M68857 M68921 M68999 M69067 M69162 M68809 M68858 M68922 M69001 M69068 M69164 M68810 M68860 M68923 M69002 M69074 M69165 M68815 M68861 M68924 M69007 M69075 M69166 M68817 M68864 M68925 M69008 M69082 M69167 Revision 0 2018-12-14 This document is available on the Internet: www.airbush helicopters.com/techpub/