On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0007, the docket of AD 2025-08-08. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0007, the docket of AD 2025-08-08. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus Helicopters
- As issued by
- Eurocopter
- Type
- Emergency Alert Service Bulletin
- Number
- 05.42
- Copies
- 2 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
Also cited in 1 SAIB.
Text · 11OCR
No revision named, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2025-0007, the docket of AD 2025-08-08. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a21ecee5f9de45dadeec160ecf032b77a0b4b491226b4ca5161f8570a1f65d46' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a21ecee5f9de45dadeec160ecf032b77a0b4b491226b4ca5161f8570a1f65d46' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS No. GAZ-05.42 Civil version(s): G, Military version(s): B, C, D, E, F, H, K, L, L1, M, M1, Ma
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE TIME LIMITS - MAINTENANCE CHECKS - Rotors and drive shafts Check of the flanges of the inclined and horizontal drive shafts on the tail rotor transmission ATA: 65 For the attention of Revision No. Date of issue Revision 0 2023-05-31 Summary:
The purpose of this ALERT SERVICE BULLETIN is to:
- Do a repetitive visual inspection of the flanges of the inclined and horizontal drive shafts.
- Make sure that there is no corrosion on the three contact surfaces of the flanges.
- If necessary, replace the drive shafts).
Compliance:
It is mandatory to comply with the instructions contained in this ALERT SERVICE BULLETIN.
Revision 0 2023-05-31 Page 1/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts Helicopters SA341 and SA342 that have inclined drive shaft Part Number (P/N) 341A343100/00/01 and/or horizontal drive shaft P/N 341A341106/00/01/02/03/04/05/06.
NOTE Refer to the Log Card (FM) of the drive shafts to identify the current notification status of the equipment.
1.A.2. Non-installed equipment or parts
- Inclined drive shaft P/N 341A343100/00/01.
- Horizontal drive shaft P/N 341A341106/00/01/02/03/04/05/06.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Airbus Helicopters has been informed about cases of presence of pitting corrosion on contact surfaces of rear drive shaft flanges. Neither cracks nor corrosion were found in the flange jo-bolt holes.
A laboratory analysis (cutting part) was carried out, the exposed surface revealed regions of intergranular failure of the material beneath the surface corrosion pits.
An excessive corrosion on the flange could lead to the loss of the tail rotor drive.
Consequently, the purpose of this ALERT SERVICE BULLETIN is to:
- Do a visual inspection of the flanges of the inclined and horizontal drive shafts.
- Make sure that there is no corrosion on the 3 contact surfaces of the flanges.
- If necessary, replace the drive shafts).
1.D. DESCRIPTION This ALERT SERVICE BULLETIN includes the work steps that follow:
- Remove the inclined and horizontal drive shafts.
- Remove the flexible couplings from the drive shafts.
- Do a visual inspection of the flanges.
- Make sure that there is no corrosion on the three contact surfaces of the flanges.
- Make an analysis of the results.
- If necessary, replace the inclined and/or horizontal drive shaft.
Revision 0 2023-05-31 Page 2/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level Not applicable.
1.E.2. Compliance in service Helicopters/installed equipment or parts:
The operator must do the work on the helicopter.
Check the Time Since New (TSN) (Flight Hours (FH) and calendar) of the inclined and horizontal drive shaft with their Log Cards (FM), not more than 100 FH or 3 months (the first limit you get to is applicable):
- If the TSN of the inclined and/or horizontal drive shaft is less than 1000 FH and less than 34 months:
• Comply with paragraph 3. when you reach 37 months or 1100 FH (the first limit you get to is applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.
Then,
• Comply with paragraph 3. of this ALERT SERVICE BULLETIN every 1100 FH or 37 months (the first limit you get to is applicable).
- If the TSN of the inclined and/or horizontal drive shaft is more or equal than 1000 FH or 34 months:
. Comply with paragraph 3. not more than 100 FH or 3 months (the first limit you get to is applicable) after you received this ALERT SERVICE BULLETIN. Refer to the issue date on the page footer.
Then, . Comply with paragraph 3. of this ALERT SERVICE BULLETIN every 1100 FH or 37 months (the first limit you get to is applicable).
Non-installed equipment or parts:
The operator must do the work on non-installed equipment.
Before you install the inclined and/or horizontal drive shaft identified in paragraph 1.A.2., check their Log Card (FM) TSN (FH and calendar):
- If the TSN of the inclined and/or horizontal drive shaft is less than 1000 FH and less than 34 months:
. The inclined and/or horizontal drive shaft can be installed on the helicopter.
- If the TSN of the inclined and/or horizontal drive shaft is more or equal than 1100 FH or 37 months:
• Comply with paragraph 3.B.6.
1.F. APPROVAL The technical content of this document is approved under the authority of the Design Organization Approval ref. EASA. 21J.700.
The technical content of this document is approved under the prerogatives of the recognition of design capability ref. FRA21J-002-DGA for French Government helicopters.
The technical content of this document is approved by Airbus Helicopters Airworthiness Department for export military versions.
Revision 0 2023-05-31 Page 3/11 This document is available on the Internet: www.a elicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
1.G. MANPOWER
• Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have this qualification:
Qualification: 1 Mechanical Technician The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated man-hours: 4 hours for the Mechanical technician to do the inspection of the flanges.
The helicopter downtime is an estimate given for information only and for a standard helicopter configuration.
The estimate of the helicopter downtime is 4 hours (excluding time to replace the drive shaft(s)).
1.H. WEIGHT AND BALANCE Not applicable.
1.I. POWER CONSUMPTION Not applicable.
1.J. SOFTWARE UPGRADES/UPDATES Not applicable.
1.K. REFERENCES These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Manuel d'entretien (MAT 8701):
MAT 8701: 52.00.401: Dépose - pose de l'arbre oblique MAT 8701: 52.00.403: Dépose - pose de l'arbre horizontal Manuel de réparation (MRR) (MAT 8703):
MRR: 52.10.851 : ARBRE DE TRANSMISSION OBLIQUE: Replacement des disques flexibles sur brides d'arbre de transmission oblique MRR: 52.30.851: ARBRE DE TRANSMISSION HORIZONTAL ET DE LIAISON: Replacement des disques sur brides fixe et coulissante de l'arbre de transmission horizontal Repair Manual (MRR):
MRR: 52.10: INCLINED SHAFT: Replacing flexible discs on the inclined transmission shaft flange MRR: 52.30: HORIZONTAL SHAFT AND CONNECTING SHAFTS: Replacement of flexible discs on the fixed and sliding flanges of the horizontal shaft Maintenance Manual (MDE):
MDE: 65.40.401: TAIL ROTOR TRANSMISSION - Removal - Installation of the inclined drive shaft MDE: 65.40.403: TAIL ROTOR TRANSMISSION - Removal - Installation of the horizontal drive shaft Revision 0 2023-05-31 Page 4/11 This document is available on the Internet: www.airbi elicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42 Standard Practices Manual (MTC):
MTC: 20-04-04-403: Touch-up of the Alodine 1200 protection (Bonderite M-Cr 1200) - Surface treatment before painting MTC: 20-07-03-406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair - Technical instructions MTC: 20-08-05-101: Drafting and updating the log card (FM) - General rules applicable to aircraft MTC: 20-90-03-104: Detection by dye penetrant inspection - Corrosion detection MTC: 20-90-05-401: Alodine 1200 treatment (aluminium alloys) - Repairs Information Notice (IN):
IN: 2832-1-00: GENERAL - Procedure for returning parts to Airbus Helicopters for overhaul/repair/technical investigation/core unit return IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
1.L. OTHER AFFECTED PUBLICATIONS Not applicable.
1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.
Revision 0 2023-05-31 Page 5/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For information about the price of the modification kits and/or components, or for aid, contact the Airbus Helicopters Network Sales and Customer Relations Department.
Availability Contact the Sales and Customer Relations Department to know the delivery lead time.
Procurement Send an order for the necessary quantities to the Airbus Helicopters Network Sales and Customer Relations Department:
Airbus Helicopters Etablissement de Marignane Direction des Ventes et Relation Client 13725 MARIGNANE CEDEX FRANCE In the purchase order, write the information that follows:
- The mode of transport
- The destination
- The serial numbers of the helicopters to change.
2.B. LOGISTIC INFORMATION Not applicable.
Revision 0 2023-05-31 Page 6/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:
Former Key Word Qty New reference Item reference → Instruction Inclined shaft drive AR 341A34310001 1 341A34310000 Replace if Or necessary 341A34310001 Horizontal shaft AR 341A34110606 2 341A34110600 Replace if drive Or necessary 341A34110601 Or 341A34110602 Or 341A34110603 Or 341A34110604 Or 341A34110605 Or 341A34110606 Consumables to be ordered separately:
Refer to the Work Cards given in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
Special tools:
Refer to the Work Cards specified in this ALERT SERVICE BULLETIN and the list below:
Key word Qty Tool reference or equivalent Item Scotch-brite AR commercial ZZ
2.D. EQUIPMENT OR PARTS TO BE RETURNED Use the procedure given in Information Notice No. 2832-1-00 to send the inclined and/or horizontal drive shaft back.
Revision 0 2023-05-31 Page 7/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
3. ACCOMPLISHMENT INSTRUCTIONS
3.А. GENERAL Not applicable.
3.B. WORK STEPS
3.B.1. Preliminary steps
- Disconnect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Install the access equipment.
- Remove the inclined drive shaft (c) (not shown) from the helicopter. Refer to Work Card 65.40.401 (MDE) or Work Card 52.00.401 (MAT 8701).
- Remove the horizontal drive shaft (d) (not shown) from the helicopter. Refer to Work Card 65.40.403 (MDE) or Work Card 52.00.403 (MAT 8701).
3.B.2. Removal of the flexibles coupling from the inclined and horizontal drive shafts
- Remove the two flexible couplings from the inclined drive shaft. Refer to Work Card 52.10.851 (MRR) or
52.10 (MRR).
- Remove the two flexible couplings from the horizontal drive shaft. Refer to Work Card 52.30.851 (MRR) or
52.30 (MRR).
3.B.3. Inspection of the flanges of the inclined and horizontal drive shafts
- Make sure that there is no corrosion on areas (A) of the two flanges (a) (Figure 1):
• Clean the contact surfaces (areas A) (Figure 1) with a scotch-brite (zz).
. Do a visual inspection on the three contact surfaces (areas A) of the two flanges (a) of the inclined drive shaft.
Areas A Figure 1 Revision 0 2023-05-31 Page 8/11 This document is available on the Internet: www.airb elicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
- Make sure that there is no corrosion on areas (A) of the flanges (a) and (b) (Figure 2):
. Clean the contact surfaces (areas A) (Figure 2) with a scotch-brite (zz).
. Do a visual inspection on the three contact surfaces (areas A) of the flange (a) and the flange (b) of the horizontal drive shaft.
Areas A Figure 2
- Make an analysis of the results. Refer to paragraph 3.B.4.
3.B.4. Interpretation of the results For each visually inspected area:
- Make sure that there is no corrosion:
. If there is no corrosion:
.. Do touch-up protection on the cleaned areas (A) of the inclined and horizontal drive shafts. Refer to Work Card 20-04-04-403 (MTC).
.. Install the flexible couplings on the inclined drive shaft. Refer to Work Card 52.10.851 (MRR) or
52.10 (MRR).
.. Install the flexible couplings on the horizontal drive shaft. Refer to Work Card 52.30.851 (MRR) or
52.30 (MRR).
.. Install the inclined drive shaft (c) or (1) (not shown) on the helicopter. Refer to Work Card 65.40.401 (MDE) or Work Card 52.00.401 (MAT 8701).
.. Install the horizontal drive shaft (d) or (2) (not shown) on the helicopter. Refer to Work Card 65.40.403 (MDE) or Work Card 52.00.403 (MAT 8701).
.. Comply with paragraph 3.B.5.
- If there is corrosion:
.. Send back the inclined drive shaft (c) and/or horizontal drive shaft (d) to Airbus Helicopters. Refer to paragraph 2.D.
.. Install an airworthy inclined drive shaft (1) (not shown) and/or install an airworthy horizontal drive shaft (2) (not shown).
.. Comply with paragraph 3.B.5.
3.B.5. Final steps
- Do an aspect check on the helicopter after inspection or repair. Refer to Work Card 20-07-03-408 (MTC).
- Connect all the electrical power supplies. Refer to Work Card 20-07-03-406 (MTC).
- Remove the access equipment.
Revision 0 2023-05-31 Page 9/11 This document is available on the Internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
3.B.6. Work steps for non-installed equipment or parts
3.B.6.a. Removal of the flexibles coupling from the inclined and horizontal drive shafts
- Remove the flexible coupling from the inclined drive shaft (c) (not shown). Refer to Work Card 52.10.851 (MRR) or 52.10 (MRR).
- Remove the flexible coupling from the horizontal drive shaft (d) (not shown). Refer to Work Card 52.30.851 (MRR) or 52.30 (MRR).
3.B.6.b. Inspection of the flanges of the inclined and horizontal drive shafts
- Make sure that there is no corrosion on areas (A) of the two flanges (a) (Figure 3):
. Clean the contact surfaces (areas A) (Figure 3) with a scotch-brite (zz).
. Do a visual inspection on the three contact surfaces (areas A) of the two flanges (a) of the inclined drive shaft (c) (not shown).
Areas A Figure 3
- Make sure that there is no corrosion on areas (A) of the flanges (a) and (b) (Figure 4):
• Clean the contact surfaces (areas A) (Figure 4) with a scotch-brite (zz).
. Do a visual inspection on the three contact surfaces (areas A) of the flange (a) and the flange (b) of the horizontal drive shaft (d) (not shown).
a Areas A Figure 4
- Make an analysis of the results. Refer to paragraph 3.B.6.c.
Revision 0 2023-05-31 Page 10/11 This document is available on the Internet: www. airbu elicopters.com/techpub/
AIRBUS HELICOPTERS No. GAZ-05.42
3.B.6.c. Interpretation of the results For each visually inspected area:
- Make sure that there is no corrosion:
. If there is no corrosion:
.. Do touch-up protection on the cleaned areas (A) of the inclined and horizontal drive shafts. Refer to Work Card 20-04-04-403 (MTC).
.. Install the flexible couplings on the inclined drive shaft. Refer to Work Card 52.10.851 (MRR) or
52.10 (MRR).
.. Install the flexible couplings on the horizontal drive shaft. Refer to Work Card 52.30.851 (MRR) or
52.30 (MRR).
.. The inclined drive shaft (c) and the horizontal drive shaft (d) can be installed on the helicopter.
If there is corrosion:
.. Send back the inclined drive shaft (c) and/or horizontal drive shaft (d) to Airbus Helicopters. Refer to paragraph 2.D.
.. Replace the inclined drive shaft (c) and/or horizontal drive shaft (d) with an airworthy inclined drive shaft (1) (not shown) and/or install an airworthy horizontal drive shaft (2) (not shown).
3.C. RECORD OF COMPLIANCE
- Record the full compliance with this ALERT SERVICE BULLETIN, with the revision number, in the Log Card (FM). Refer to Work Card 20-08-05-101 (MTC).
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link NOTE recording compliance ALERT SERVICE BULLETINS in SB Insight tool does not replace the recording in the helicopter documents.
ASB SA341-05.42 ASB SA342-05.42
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.
Revision 0 2023-05-31 Page 11/11 This document is available on the Internet: www.airbushelicopters.com/techpub/