On this page
ADs that cite it · 2
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 17OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0135, the docket of AD 2021-10-21. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'efa75e5f8a5732acb0034408594384ab21a46d44c5fc1bb3c3445812ed13dd8a' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'efa75e5f8a5732acb0034408594384ab21a46d44c5fc1bb3c3445812ed13dd8a' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007 Valid for Version(s): C-2, C-2e.
ALERT SERVICE BULLETIN SUBJECT: MAIN ROTOR SYSTEM - Swashplate Removal of the swashplate bellows and retrofit of the deflection ring of the swashplate For the attention of Revision No. Date of issue Revision 0 2014-03-31 Revision 1 2014-08-04 Revision 2 2015-07-30 Revision 3 2016-02-08 Revision 4 2016-05-23 Revision 5 2017-07-25 Summary:
With this Alert Service Bulletin (ASB), Airbus Helicopters Deutschland (AHD) prescribes the removal of the swashplate bellows and the retrofit of the deflection ring of the swashplate.
Reason for last Revision:
Please replace Revision 4 of this ASB with Revision 5.
With Revision 5 of this ASB the removal of the swashplate bellows and a repetitive inspection of the swashplate every 400 Fh remains unchanged. Furthermore with Revision 5 the retrofit of the deflection ring of the swashplate is prescribed, if not already performed with Revision 3. The repetitive inspection of the swashplate every 100 Fh has been deleted with Revision 5 and must no longer be performed.
Compliance:
The removal of the swashplate bellows contained in this ASB is mandatory (part of EASA AD).
AHD considers that the retrofit of the swashplate deflection ring and the 400 Fh inspection contained in this ASB are both essential (not part of EASA AD).
Revision 5, 2017-07-25 PAGE 1 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment
(a) MBB-BK117 C-2, C-2e, up to S/N 9800 inclusive.
(b) Swashplate P/N B623M2002101 P/N B623M2002102 Deflection ring P/N 105-41902.06 Swashplate bellows P/N B623M20X2240 or P/N 105-10113.05 or P/N 4638305043
1.A.2. Non-installed equipment Swashplate P/N B623M2002101 Deflection ring P/N 105-41902.06 Swashplate bellows P/N B623M20X2240 or P/N 105-10113.05 or P/N 4638305043
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON During a postflight check on a BO105, it was detected that the lower clamp of the swashplate bellows was missing. Prior to this, the loose clamp caused damage to the swashplate bearing ring.
Therefore with Revision 0 a new fixation of the swashplate bellows with cable ties was introduced. After the introduction of the new fixation, AHD was informed about several cases where the swashplate bellows fixed with cable ties became loose and separated from the swashplate.
To prevent damage caused by a separated bellows on the tail rotor blades, with Revision 2 of this ASB the removal of the swashplate bellows was prescribed. Furthermore, a repetitive inspection of the swashplate every 100 Fh and every 400 Fh was prescribed.
With this Revision 3 of this ASB, AHD prescribes the installation of a new swashplate bellows and a new deflection ring for the swashplate.
After Revision 3 was published, AHD was informed about several cases where the cable ties in the lower bellows fold have dislodged. Further investigations showed a non-conformity issue with the bellows manufacturer's tooling of swashplate bellows P/N B623M20X2240.
Therefore with Revision 4 of this ASB, AHD prescribed the removal of the swashplate bellows and a repetitive inspection of the swashplate every 100 Fh and every 400 Fh.
PAGE 2 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007 Based on the experience from the fleet flying without bellows, AHD decided to approve the design of the swashplate without bellows and to remove the 100 Fh inspection interval. To improve and ensure the equality of the swashplate design in the fleet AHD also decided to prescribe the retrofit of the deflection ring, of the swashplate, which was already introduced with Revision 3 of the ASB.
Therefore, with Revision 5 of this ASB, AHD prescribes the removal of the swashplate bellows, the retrofit of the deflection ring of the swashplate and a repetitive inspection of the swashplate every 400 Fh.
1.D. DESCRIPTION Remove the swashplate bellows. Retrofit the deflection ring of the swasplate. Do a repetitive inspection of the swashplate every 400 Fh.
Revision 5, 2017-07-25 PAGE 3 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
1.E. COMPLIANCE Receipt of this ASB Yes Swashplate bellows installed?
No Remove the swashplate bellows within 400 Fh No Swashplate P/N (+ 40 Fh tolerance) after B623M2002101 receipt of Revision 4 of installed?
this ASB, refer to Section 3.B.1 Yes Retrofit the deflection ring of the swashplate within 400 Fh (+ 40 Fh tolerance) after receipt of this ASB, refer to Section 3.B.2.
Confirm accomplishment of this ASB Do a repetitiv inspection of the swashplate every 400 Fh (+ 40 Fha tolerance) after the removal of the swashplate bellows, refer to section З.В.З PAGE 4 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
1.E.1. Compliance on the manufacturer's site Helicopters/installed equipment:
(a) The swashplate bellows must be removed before a helicopter is delivered at the latest, refer to Section 3.B.1.
(b) The new deflection ring must be installed before a helicopter is delivered at the latest, refer to Section 3.B.2.
Non-installed equipment:
(a) The swashplate bellows must be removed before a main transmission is delivered at the latest, refer to Section 3.B.1.
(b) The new deflection ring must be installed before a main transmission is delivered at the latest, refer to Section 3.B.2.
(c) The new deflection ring must be installed before a swashplate is delivered at the latest, refer to Section 3.B.2.
1.E.2. Compliance in service Helicopters/installed equipment:
EFFECTIVITY Helicopters with installed swashplate bellows.
(a) Remove the swashplate bellows within 400 Fh (+ 40 Fh tolerance) after receipt of Revision 4 of this ASB, refer to Section 3.B.1.
EFFECTIVITY Helicopters with swashplate P/N B623M2002101.
(b) Retrofit the deflection ring of the swashplate within 400 Fh (+ 40 Fh tolerance) after receipt of this ASB, refer to Section 3.B.2.
EFFECTIVITY All helicopters.
(c) Do a repetitive inspection of the swashplate every 400 Fh (+ 40 Fh tolerance) after the removal of the swashplate bellows, refer to Section 3.B.3.
Non-installed equipment:
(a) The swashplate bellows must be removed before a main transmission is installed on a helicopter at the latest, refer to Section 3.B.1.
(b) The deflection ring of the swashplate must be retrofitted before a main transmission is installed on a helicopter at the latest, refer to Section 3.B.2.
(c) The deflection ring of the swashplate must be retrofitted before the swashplate is installed on a helicopter at the latest, refer to Section 3.B.2.
Revision 5, 2017-07-25 PAGE 5 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
1.F. APPROVAL Approval of modification (s):
The information or instructions contained in this document refer to change no. 4739. The technical content of this document is approved under the authority of DOA No. EASA.21J.700.
1.G. MANPOWER Qualification Mechanic Electrician Pilot Others Estimated approx. 3 n Man-hours
1.H. WEIGHT AND BALANCE Weight: - 0.274 kg Arm longitudinal: + 4451 mm Moment longitudinal: - 1220kgmm Arm lateral: 0 mm Moment lateral: 0 kgmm
1.1. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.
1.K. REFERENCES AMM MBB-BK117 C-2.
1.L. DOCUMENTS AFFECTED Publications already updated:
Not applicable.
Publications to be updated:
The changes to SDS/AMM/MSM MBB-BK117 C-2 and IPC MBB-BK117 C-2 which are required as a result of this Alert Service Bulletin will be incorporated with one of the next revisions.
1.M.INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:
(a) After accomplishment of this ASB the swashplate bellows P/N 105-10113.05, P/N 4638305043 and P/N B623M20X2240 must no longer be installed to the swashplate.
(b) After accomplishment of this ASB the swashplate P/N B632M2002101 must no longer be installed to the helicopter.
Mixability:
Not applicable.
PAGE 6 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS • ASB MBB-BK117 C-2-62A-007
2. MATERIAL INFORMATION
2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Information on price and availability of required material kit SB-117C2-62A-007-2C-2 will be provided by AHD, Dept. Spares Order Administration on request.
2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Material kits to be ordered for one helicopter or one assembly:
Material kit SB-117C2-62A-007-2C-2, refer to design document D632M1001885.
No. Key Word Qty New P/N Old P/N Remark Outer deflection ring 2 B623M2002210 1 105-41902.06 A 2 Name plate 1 MBBN3060E2AS EFFECTIVITY If the upper swashplate bellows must be removed.
Bellows 1 B623M20X2240 or 105-10113.05 or 4638305043 4 Cable tie 2 E0043-6COP 5 Cable tie E0043-2COP Remark:
A = AHD does not take back parts with old part numbers.
Revision 5, 2017-07-25 PAGE 7 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007 Consumable materials to be ordered separately:
Consumable materials to be ordered from KLX Aerospace Solutions. The given CM numbers are refer to the AMM list of consumable materials.
Website: https://www.klxaerospace.com E-mail: integration@klx.com
WARNING
RESPECT THE SAFETY DATA SHEET OF THE MANUFACTURER.
No. Key Word Qty Specification * Remark (approx) 1 Lacquer 5 g 421 2 Lockwire a.n.* 775 or 776 * Specification refer to AMM, 01-00-00, 2-1.
Remark:
A= Can be used alternatively. CM 775 should be preferred.
2.D. MATERIAL TO BE RETURNED Not applicable.
PAGE 8 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL Not applicable.
3.B. OPERATIONAL PROCEDURE
3.B.1. Removal of the swashplate bellows EFFECTIVITY Helicopters with swashplate bellows P/N 105-10113.05 or P/N 4638305043.
(a) Remove the cable ties or clamps (2, Fig. 1) and cable ties (3) from the swashplate bellows
(4).
(b) Remove the swashplate bellows (4, Fig. 1) from the swashplate (5) and from the hub-shaft (1).
(c) Discard the swashplate bellows (4, Fig. 1).
3x2 2x2 5 1 Hub-shaft 2 Cable tie or clamp 3 Cable tie 4 Swashplate bellows 5 Swashplate Figure 1 Revision 5, 2017-07-25 PAGE 9 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
• EFFECTIVITY Helicopters with swashplate bellows P/N B623M20X2240.
(d) Remove the cable ties (2, Fig. 2), cable ties (3) and cable ties (5) from the swashplate bellows (4).
(e) Remove the swashplate bellows (4, Fig. 2) from the swashplate (6) and from the hub-shaft (1).
(t) Discard the swashplate bellows (4, Fig. 2).
2x2 3x2 5x3 1 Hub-shaft 2 Cable tie 6 3 Cable tie 4 Swashplate bellows 5 Cable tie 6 Swashplate Figure 2 PAGE 10 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007 EFFECTIVITY Only for helicopters in service.
(9) Take pictures of all inspected parts that follow. Archive the pictures with the log card of the main transmission.
NOTE Use a flashlight and a mirror for the inspection.
(h) Do the inspection of the support tube (11, Fig. 5) as follows:
NOTE In order to inspect the surface of the support tube (11, Fig. 5) use the collective lever to move the swashplate (2) up and down.
1 Clean the support tube (11, Fig. 5).
2 Examine the support tube (11, Fig. 5) for scratches.
- If there are scratches, rework cylindrical area to a max. depth of 0.1 mm with polishing cloth #400. Reworked area must not exceed 10 mm in width, or 3 cm? in area. A minimum separation between any adjacent reworked areas must be 30 mm, and total reworked areas must not exceed 10 percent of the cylindrical area.
Do the inspection of the clamp (9, Fig. 5) for corrosion, damage and correct installation:
1 Replace a corroded or damaged clamp (9, Fig. 5).
2 If necessary install the clamp (9, Fig. 5) correctly on the shield (10).
3 Apply a torque between 0.5 Nm and 0.7 Nm to the screw (8, Fig. 5).
1) Do the inspection of the ball bearings (1, Fig. 5) as follows:
1 Visually inspect the ball bearings (1, Fig. 5) for corrosion.
2 If the ball bearings (1, Fig. 5) show corrosion, contact AHD customer support
(k) Do the inspection of the area under the outer deflection ring (5, Fig. 5) as follows:
1 Remove the lockwires (3, Fig. 5) from the screws (4).
2 Remove the screws (4, Fig. 5).
3 Remove the outer deflection ring (5, Fig. 5).
4 If there are foreign objects, remove the foreign objects.
5 Remove dirt with a lint-free cloth.
6 Lubricate the swashplate bearing, refer to AMM, 62-31-00, 3-1.
Z Install the outer deflection ring (5, Fig. 5) with the screws (4).
8 Apply a torque between 4 Nm and 6 Nm to the screws (4, Fig. 5).
9 Safety the screws (4, Fig. 5) with new lockwire (CM 776) (3), refer to MTC, 20-02-06-402.
Revision 5, 2017-07-25 PAGE 11 of 17 This document is available on the internet: www.airbushelicopters.com/techpub/
AIRBUS HELICOPTERS ASB MBB-BK117 C-2-62A-007
3.B.2. Retrofit of the outer deflection ring
CAUTION
MAKE SURE NOT TO DAMAGE THE DRIVING LINK
PARTS AND THE ROTOR MAST DURING THE REMOVAL OF THE OUTER DEFLECTION RING.
(a) Remove the lockwire (4, Fig. 3) from the hexagon head screws (3).
(b) Remove the twelve hexagon head screws (3, Fig. 3) from the swashplate (1). Store the hexagon head screws (3) for reuse.
CAUTION
MAKE SURE THAT NOT CHIPS FALL INTO THE
SWASHPLATE OR ONTO BENEATH LYING COMPONENTS.
(c) Protect the swashplate (1, Fig. 3) with a cloth.
(d) Cut the outer deflection ring (2, Fig. 3) in two pieces using a metal snips or a suitable tool.
(e) Remove the outer deflection ring (2, Fig. 3) from the swashplate (1).
(t) Discard the outer deflection ring (2, Fig. 3).
Swashplate 2 Outer deflection ring 3 Hexagon head screw 4 Lockwire 4x6 2/2 Store hexagon head screws for reuse.
The outer deflection ring must be cut in two pieces for the removal.
Figure 3 PAGE 12 of 17 Revision 5, 2017-07-25 This document is available on the internet: www.airbushelicopters.com/techpub/