Service bulletin · Airbus Helicopters

No revision namedAirbus Helicopters SB SB-AHCA-128 Rev 0 · 7 pages · 2.2 MB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0449; AD 2021-16-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-0449 (document 0004) · AD 2021-16-16

Manufacturer
Airbus Helicopters
Type
Service Bulletin
Number
SB-AHCA-128

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 7OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2021-0449; AD 2021-16-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ed02f61a91c69d506e0c0ae832f9fb346fbc4b51c714eeaae83bf08c412e018b'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128 Effective for version: AS 350 B, BA, B1, B2, B3, D AS 355 E, F, F1, F2, N, NP

SERVICE BULLETIN SUBJECT: EQUIPMENT AND FURNISHINGS Litter Kit Modification of bead chain tether attachment location For the attention of Revision No Date of issue Revision 0 2017-03-24 Summary:

This Service Bulletin defines the required changes to the AS 350 and AS 355 helicopters with the Litter Kit provisions installed as specified in Section 1.A. Effectivity. The change consists of relocating the hole for the screws and washers securing the bead chain tether for the pip pins on the forward bracket assembly.

Compliance:

Compliance with this Service Bulletin is recommended.

Revision 0 2017-03-24 Page 1/7

Page 2OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128

PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment The Service Bulletin is applicable to AS 350 and AS 355 helicopters with the following AHCA Litter Kit installations:

Left-Hand Litter Kit, P/N's 350-200034 or 350-200194 TCCA STC SH94-29 issue 9 or earlier (for AS 350 and AS 355) TCCA Limited STC O-LSH93-0162, issue 2 or earlier (for AS 350, SN's 2738 and 2749) FAA STC SR00406NY, issued March 21, 1996 (for AS 355) FAA STC SR00407NY, amended August 22, 2005 or earlier (for AS 350) ANAC STC 1999S08-14, issued August 17, 1999 (for AS 350) ANAC STC 1999S08-15, issued August 17, 1999 (for AS 350) ANAC STC 1999S08-16, issued August 17, 1999 (for AS 355) EASA STC 10038250, issued January 31, 2012 (for AS 350 and AS 355) DGAC Mexico STC IA-299/2015, issued February 27, 2015 (for AS 350 and AS 355) Right-hand Litter Kit, PN 350-200144 TCCA STC SH96-62 issue 5 or earlier (for AS 350) TCCA O-LSH03-094/D issue 1 (AS 350, SN 3478) TCCA O-LSH96-344/D issue 2 or earlier (for AS 350, SN's 2855 and 2931) FAA STC SR00458NY amended June 16, 2005 or earlier (for AS 350) LBA RC 1024 issued August 24, 1998 (for AS 350)

1.A.2. Non-installed equipment Not applicable.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON The bead chain tethers, securing the pip pins to the forward bracket are relocated to avoid the possibility of improper installation which could result in the chain inhibiting rudder pedal full range of movement.

1.D. DESCRIPTION The screws, washers and nuts securing the bead chain tethers are relocated.

1.E. COMPLIANCE

1.E.1. Compliance at H/C Manufacturer Level Not applicable.

Revision 0 2017-03-24 Page 2/7

Page 3OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128

1.E.2. Compliance in service The work on the helicopter is to be performed by the Operator.

Helicopters/installed equipment:

Following receipt of this Service Bulletin, Airbus Helicopters Canada recommends compliance with Section 3 before next flight, if the Litter Kit is installed.

Non-installed equipment:

Following receipt of this Service Bulletin, Airbus Helicopters Canada recommends compliance with Section 3 before next installation.

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

Not applicable.

1.G. MANPOWER Qualification Mechanic Electrician Pilot Time 1 hour

1.H. WEIGHT AND BALANCE Not applicable

1.I. EFFECT ON ELECTRICAL LOADS Not applicable.

1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD Not applicable.

1.K. REFERENCES The following documents are required for compliance with this Service Bulletin:

MTC: 20-02-04-401: Riveting MTC: 20-02-05-404: Joining by bolts and nuts MTC: 20-04-05-101: Paint and primer application procedure MTC: 20-04-04-403: Touch-up of protective treatment with Alodine 1200 MTC: 20-07-03-408: Appearance checks on an aircraft after an inspection or repair Revision 0 2017-03-24 Page 3/7

Page 4OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128

1.L. DOCUMENTS AFFECTED Not applicable.

1.M. INTERCHANGEABILITY OR MIXABILITY OF PARTS Interchangeability:

Not applicable.

Mixability:

Not applicable.

2. MATERIAL INFORMATION

2.A. MATERIAL: PRICE - AVAILABILITY - PROCUREMENT Not applicable.

2.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.

2.C. MATERIAL REQUIRED FOR EACH HELICOPTER/COMPONENT Kits or components to be ordered for one helicopter or one assembly:

Not applicable.

Material to be ordered separately:

Not applicable.

Products to be ordered separately:

Not applicable.

Material supplied by the user:

2 rivets (P/N MS20470AD5-4, or equivalent) Material required for non-installed components:

Not applicable.

Specific tooling:

Not applicable.

2.D. MATERIAL TO BE RETURNED Not applicable.

Revision 0 2017-03-24 Page 4/7

Page 5OCROpen in PDF

AIRBUS AIRBUS HELICOPTERS CANADA LIMITED HELICOPTERS SB-AHCA-128

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL Not applicable.

3.B. OPERATIONAL PROCEDURE

3.B.1. Preliminary steps

(a) If installed, remove the litter from the aircraft.

(b) Remove the forward bracket assembly.

3.B.2. Procedure NOTE: Dimensions are given in millimeters, unless otherwise specified.

NOTE: Use torque per MTC, Chapter 20-02-05-404, unless otherwise specified.

a) Remove the existing screws (P/N LN9038-04010, 2 places), washers (P/N LN9016-04K, 2 or 4 places) and nuts (P/N LN9348-04, 2 places) securing the bead chain tethers to the forward bracket assembly.

Retain hardware for re-installation. Refer to Figure 1.

b) Fill the empty holes with rivets (2 places, MS20470AD5-4, or equivalent). Refer to Figure 1.

Use measurements given in Figure 1 to determine the new hole locations. Refer to reference points a Drill 4.5 millimeter diameter holes (2 places). Deburr, touch up alodine, and prime holes.

Secure the bead chain tethers on the top side of the forward bracket assembly using screws (P/N LN9038-04010, 2 places), washers (P/N LN9016-04K, 2 or 4 places as removed) and nuts (P/N LN9348-04, 2 places) in the new hole locations.

Revision 0 2017-03-24 Page 5/7

Page 6OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128 350-200054 350-200184 LH Forward Bracket Assembly LH Forward Bracket Assembly, Short 50 | 350-200154-01 350-200154-02 RH Forward Bracket Assembly RH Forward Bracket Assembly, Short Existing bead chain tether location.

Fill holes with rivets (P/N MS20470AD5-4, or equivalent) NOTE :

Figure 1 Litter Kit Forward Brackets Revision 0 2017-03-24 Page 6/7

Page 7OCROpen in PDF

AIRBUS

HELICOPTERS AIRBUS HELICOPTERS CANADA LIMITED SB-AHCA-128

3.B.3. Tests Not applicable.

3.B.4. Final steps

(a) Ensure installation is correct and secure.

3.B.5. Ground run-up / flight test Not applicable.

3.B.6. Operational procedure on non-installed equipment Not applicable.

3.C. IDENTIFICATION Identification of this document:

Record compliance with this Service Bulletin in the aircraft records.

Identification of modifications on the documentation:

Not applicable Identification of modifications on the equipment:

Not applicable.

3.D. OPERATING AND MAINTENANCE INSTRUCTIONS Operating instructions:

Not applicable.

Maintenance instructions:

Not applicable.

4. APPENDIX Not applicable.

Revision 0 2017-03-24 Page 717