On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 44
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-1113, the docket of AD 2021-11-18. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7672b128c102ff9e92c14745801c4b72107cfa09582525337abf1278b84f67a4' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '7672b128c102ff9e92c14745801c4b72107cfa09582525337abf1278b84f67a4' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
@A300-600
SERVICE BULLETIN
SUMMARY AIRBUS
CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1 This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
MANDATORY
MANDATORY ATA SYSTEM: 32 TITLE: LANDING GEAR - MAIN GEA R - CHANGE BARREL/HINGE ARM PIN
WITH NEW WET PRIMER-IMPREGNATED PIN **CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION MAJOR 13859S22952 MINOR None NOTE : As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES Three cases of cracks on Main Landing Gear (MLG) barrel/hinge arm pin have been reported to Airbus.
These cracks initiate on the inner diameter of the barrel/hinge arm pin following an overload leading to the connecting rod bushes fracture.
The aim of this modification is to replace the existing barrel/hinge arm pin with a new barrel/hinge arm pin that has wet primer impregnation applied by the manufacturer to fill the chrome plating micro-cracks in order to improve corrosion protection.
This Service Bulletin is published to advise all operators of A300-600 aircraft of the issue of SAFRAN LANDING SYSTEMS Service Bulletin No 470-32-841 wh ich installs a new impr oved hinge arm pin.
This Service Bulletin offers the possibility to operators to perform this replacement in shop through SAFRAN LANDING SYSTEMS Service Bulletin No 470-32-841 or on-wing.
After the removal of the barrel/hinge arm pin, either in shop or on-wing, a visual inspection of bushes and of the removed barrel/hinge arm pin shall be performed. After this step, the pre-MOD barrel/hinge arm pin shall be sent to SAFRAN workshop for dimensional analysis as per VSB 470-32-840.
DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 1 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
SUMMARY In case the MOD in embodied on wing, the removal of the pre MOD barrel/hinge arm pin and the installation of the post MOD one shall be done as per AMM task 32-11-11 Page Block 401 whereas the inspection of the bushes and of the removed barrel/hinge arm pin shall be done as per AMM task 32-11-11 Page Block 601.
The accomplishment of this Service Bulletin introduces new barrel/hinge arm pins with improved corrosion protection in workshop and cancels the need to apply AOT A32W008-16.
This Modification Service Bulletin concerns the airworthiness limitations of Airworthiness Limitation Section (ALS) Part 1 which is introduced within the A/C maintenance program under the operator responsibility. Please download the relevant ALS Variation on AirbusWorld.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY (1)
CANCELS INSPECTION SB NO
POTENTIAL AD YES
A/C OPERATION AFFECTED NO
RELIABILITY AFFECTED NO
PAX COMFORT AFFECTED NO
COST SAVING NO
ETOPS AFFECTED NO
STRUCTURAL LIFE EXTN NO
VENDOR SB INVOLVED YES
AIRCRAFT JACKING YES NOTE
(1) : Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
QTY PER A/C
PRICE PER
A/C (USD)
MAIN PARTS Equipment BFEA01 1 See SB Barrel/Hinge arm pins
EFFECTIVITY This Service Bulletin is applicable to this (these) operator(s) :
14S AAW ABR AHK BCS FDX IRA IRM KAC MNB MRJ MSR QSM
SOP SUD TAR TNO UPS URS UTP
CONCURRENT REQUIREMENTS None
REFERENCES / REPERCUSSIONS TFU
32.11.00.023 OEB None AOT A32W008-16 SIL None ISI None
LINE MAINTENANCE AFFECTED No
LIFE LIMIT None OTHER None DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 2 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
SUMMARY
NATURE OF THE WORK
AIRCRAFT NO
EQUIPMENT YES
MANPOWER Task 326120-831-801-001: OPTION 1 - Replacement of the Barrel/Hinge Arm Pin in shop in accordance with VSB
TOTAL MANHOURS
79.50
ELAPSED TIME (HOURS)
15.00 Additional manhours relat ed to Vendor SB; refer to:
Remove the LH and RH Barrel/Hinge Arm Pins on Bench
SAFRAN LANDING SYSTEMS SAS Service Bulletin No. 470-32-841 Install the New LH and RH Barrel/Hinge Arm Pins on Bench
SAFRAN LANDING SYSTEMS SAS Service Bulletin No. 470-32-841 Task 326120-831-802-001: OPTION 2 - Modification of the Barrel/Hinge Arm Pin on Wings
TOTAL MANHOURS
22.75
ELAPSED TIME (HOURS)
10.50
APPENDICES Appendix 01 - Manpower Gantt Chart Appendix 02 - Manpower Gantt Chart DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 3 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
SUMMARY **CONF ALL B
LH SHOWN
RH SYMMETRICAL A B
REPLACEMENT OF THE
BARREL/HINGE ARM PIN Z731 Z741 A D_SB_326120_5_SAAA_01_01 Figure A-FSAAA - Sheet 01 DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 4 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN AIRBUS
CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1
MANDATORY
MANDATORY
MANDATORY ATA SYSTEM: 32 TITLE: LANDING GEAR - MAIN GEA R - CHANGE BARREL/HINGE ARM PIN
WITH NEW WET PRIMER-IMPREGNATED PIN MODIFICATION No.: 13859S22952 This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with any information contained in it. It is delivered on the express condition that said document and the information contained in it shall be treated as confidential, shall not be used for any purpose other than that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall not be duplicated in any manner (except for the purposes of performing the tasks described hereunder and provided that any recipient of such document shall comply with the conditions herein), without AIRBUS prior written consent.
1. PLANNING INFORMATION **CONF ALL A. EFFECTIVITY NOTE : This modification is applicable by Service Bulletin only.
(1) Models B4-603 B4-605R B4-622 B4-622R C4-605R/FC4-620 F4-605R F4-622R
(2) Effectivity by MSN 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479 0505 0518 0521 0525 0530 0532 0536 0543 0546 0553 0555 0557-0559 0561 0563 0572 0575 0579 0581 0584 0602-0603 0607-0608 0611 0613 0617-0618 0621 0623 0625-0626 0630 0632-0633 0637 0641 0643 0657 0659 0664 0666 0668 0670 0677 0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715 0717 0719 0721-0730 0732-0746 0748-0750 0752-0764 0766 0768-0775 0777-0794 0797 0799-0840 0845-0878 DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 1 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
(3) Effectivity by Operator The Operator/MSN relationship is provided for information only and is correct at the time of issue in accordance with the information available to AIRBUS. Any future changes resulting from transfer of an aircraft from one operator to another will not be reflected in this list unless the Service Bulletin is revised for another reason.
OPERATOR MSN 14S 0694 0699 0719 0721 0782 0784 0785 0786 0787 AAW 0788 ABR 0557 0677 0717 0722 AHK 0683 0770 0855 0856 0857 0858 0859 0860 0870 0871 BCS 0602 0617 0621 0637 0641 0670 0679 0703 0711 0724 0729 0730 0737 0740 0743 0753 0783 0797 0836 0837 0872 FDX 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559 0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664 0668 0688 0709 0713 0715 0726 0728 0735 0736 0738 0742 0745 0748 0752 0757 0759 0760 0761 0766 0768 0769 0771 0772 0774 0777 0778 0779 0780 0781 0789 0790 0791 0792 0793 0794 0799 0800 0801 0802 0803 0804 0873 0874 0875 0876 0877 0878 IRA 0632 0696 0723 0727 IRM 0380 0401 0405 0408 0411 0414 0518 0546 0553 0608 0618 0623 0701 0773 0838 KAC 0344 MNB 0521 0525 0734 0739 0758 MRJ 0750 0762 MSR 0561 0607 QSM 0584 0603 0744 0749 0764 SOP 0532 0756 SUD 0666 0775 TAR 0505 0558 0563 TNO 0626 0643 0755 UPS 0805 0806 0807 0808 0809 0810 0811 0812 0813 0814 0815 0816 0817 0818 0819 0820 0821 0822 0823 0824 0825 0826 0827 0828 0829 0830 0831 0832 0833 0834 0835 0839 0840 0845 0846 0847 0848 0849 0850 0851 0852 0853 0854 0861 0862 0863 0864 0865 0866 0867 0868 0869 URS 0733 UTP 0707 0725 0732 0741 0746 0754 0763 DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 2 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
(4) Configuration by MSN MSN
CONFIGURATION 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479 0505 0518 0521 0525 0530 0532 0536 0543 0546 0553 0555 0557 0558 0559 0561 0563 0572 0575 0579 0581 0584 0602 0603 0607 0608 0611 0613 0617 0618 0621 0623 0625 0626 0630 0632 0633 0637 0641 0643 0657 0659 0664 0666 0668 0670 0677 0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715 0717 0719 0721 0722 0723 0724 0725 0726 0727 0728 0729 0730 0732 0733 0734 0735 0736 0737 0738 0739 0740 0741 0742 0743 0744 0745 0746 0748 0749 0750 0752 0753 0754 0755 0756 0757 0758 0759 0760 0761 0762 0763 0764 0766 0768 0769 0770 0771 0772 0773 0774 0775 0777 0778 0779 0780 0781 0782 0783 0784 0785 0786 0787 0788 0789 0790 0791 0792 0793 0794 0797 0799 0800 0801 0802 0803 0804 0805 0806 0807 0808 0809 0810 0811 0812 0813 0814 0815 0816 0817 0818 0819 0820 0821 0822 0823 0824 0825 0826 0827 0828 0829 0830 0831 0832 0833 0834 0835 0836 0837 0838 0839 0840 0845 0846 0847 0848 0849 0850 0851 0852 0853 0854 0855 0856 0857 0858 0859 0860 0861 0862 0863 0864 0865 0866 0867 0868 0869 0870 0871 0872 0873 0874 0875 0876 0877 0878 001
(5) Configuration definition **CONF 001 Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a standard configuration.
(6) Material Effectivity
MATERIAL
QTY PER A/C
SEE NOTES Equipment BFEA01 1 Reidentified part set REIDA01 1 B. CONCURRENT REQUIREMENTS None C. REASON
(1) History Three cases of cracks on Main Landing Gear (MLG) barrel/hinge arm pin have been reported to Airbus. These cracks initiate on the inner diameter of the barrel/hinge arm pin following an overload leading to the connecting rod bushes fracture.
(2) Objective/Action The aim of this modification is to replace the existing barrel/hinge arm pin with a new barrel/hinge arm pin that has wet primer impregnation applied by the manufacturer to fill the chrome plating micro-cracks in order to improve corrosion protection.
DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 3 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN This Service Bulletin is published to advise all operators of A300-600 aircraft of the issue of SAFRAN LANDING SYSTEMS Service Bulle tin No 470-32-841 which installs a new improved hinge arm pin.
This Service Bulletin offers the possibility to operators to perform this replacement in shop through SAFRAN LANDING SYSTEMS Ser vice Bulletin No 470-32-841 or on-wing.
After the removal of the barrel/hinge arm pin, either in shop or on-wing, a visual inspection of bushes and of the removed barrel/hinge arm pin shall be performed. After this step, the pre-MOD barrel/hinge arm pin shall be sent to SAFRAN workshop for dimensional analysis as per VSB 470-32-840.
In case the MOD in embodied on wing, the removal of the pre MOD barrel/hinge arm pin and the installation of the post MOD one shall be done as per AMM task 32-11-11 Page Block 401 whereas the inspection of the bushes and of the removed barrel/hinge arm pin shall be done as per AMM task 32-11-11 Page Block 601.
(3) Advantages The accomplishment of this Service Bulletin introduces new barrel/hinge arm pins with improved corrosion protection in workshop and cancels the need to apply AOT A32W008-16.
(4) Operational/Maintenance Consequences This Modification Service Bulletin concerns the airworthiness limitations of Airworthiness Limitation Section (ALS) Part 1 which is introduced within the A/C maintenance program under the operator responsibility. Please download the relevant ALS Variation on AirbusWorld.
D. DESCRIPTION NOTE : To accomplish this Service Bulletin, you have two options.
To accomplish this Service Bulletin it is necessary to :
Task 326120-831-801-001: OPTION 1 - Replacement of the Barrel/Hinge Arm Pin in shop in accordance with VSB
(1) Remove the MLG, LH side
(2) Remove the MLG, RH side
(3) Remove the LH and RH Barrel/Hinge Arm Pins on Bench
(4) Install the New LH and RH Barrel/Hinge Arm Pins on Bench
(5) Install the MLG, LH side
(6) Install the MLG, RH side Task 326120-831-802-001: OPTION 2 - Modification of the Barrel/Hinge Arm Pin on Wings
(1) Remove the Barrel/Hinge Arm Pin, LH side DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 4 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
(2) Remove the Barrel/Hinge Arm Pin, RH side
(3) Do the Inspection of the LH and RH Barrel/Hinge Arm Pins and Connecting Rod Bushes on Wings
(4) Install the New Barrel/Hinge Arm Pin, LH side
(5) Install the New Barrel/Hinge Arm Pin, RH side
(6) Re-identify the MLG, LH side
(7) Re-identify the MLG, RH side E. COMPLIANCE
(1) Classification MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale Accomplishment of this Service Bulletin must be done, whichever occurs later between these:
- Within 30 months from MLG barrel/hinge arm pin first flight.
or
- Within 30 months from the original issue date of this Service Bulletin provided that AOT A32W008-16 rev 01 is still accomplished. Report to Airbus before next flight.
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the threshold given but reference should be made to the AD for confirmation of the mandated accomplishment timescale.
F. APPROVAL The technical content of this document is approved under the authority of Design Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.
DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 5 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.
Task 326120-831-801-001: OPTION 1 - Replacement of the Barrel/Hinge Arm Pin in shop in accordance with VSB Get Access
27.50 On Aircraft Remove the MLG, LH side
10.00 Remove the MLG, RH side
10.00 Install the MLG, LH side
11.25 Install the MLG, RH side
11.25 Tests
4.00 Close-Up
5.50
TOTAL MANHOURS
79.50
ELAPSED TIME (HOURS)
15.00 Additional manhours relat ed to Vendor SB; refer to:
Remove the LH and RH Barrel/Hinge Arm Pins on Bench
SAFRAN LANDING SYSTEMS SAS Service Bulletin No. 470-32-841 Install the New LH and RH Barrel/Hinge Arm Pins on Bench
SAFRAN LANDING SYSTEMS SAS Service Bulletin No. 470-32-841 NOTE : For an explanation of the man-hours and elapsed time, refer to the Gantt Chart, Fig. A-FAAAA given in Appendix 01 - Manpower Gantt Chart .
Task 326120-831-802-001: OPTION 2 - Modification of the Barrel/Hinge Arm Pin on Wings Get Access
2.00 On Aircraft Remove the Barrel/Hinge Arm Pin, LH side
5.75 Remove the Barrel/Hinge Arm Pin, RH side
5.75 Install the New Barrel/Hinge Arm Pin, LH side
2.25 Install the New Barrel/Hinge Arm Pin, RH side
2.25 Re-identify the MLG, LH side
0.25 Re-identify the MLG, RH side
0.25 On Bench Do the Inspection of the LH and RH Barrel/Hinge Arm Pins and Connecting Rod Bushes on Wings
1.00 Close-Up
3.25
TOTAL MANHOURS
22.75
ELAPSED TIME (HOURS)
10.50 NOTE : For an explanation of the man-hours and elapsed time, refer to the Gantt DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 6 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN Chart, Fig. A-FABAA given in Appendix 02 - Manpower Gantt Chart .
H. WEIGHT AND BALANCE Not Changed I. ELECTRICAL LOAD DATA Not Changed J. REFERENCES Aircraft Maintenance Manual (AMM) 06-21-00 20-21-12 24-00-00 32-11-11 Consumable Material List (CML) ATA Common Support Data Dictionary (CSDD), Chapter 2 Elec. Std. Practices Manual (ESPM) 20-55-00 Vendor Service Bulletin (VSB)
SAFRAN LANDING SYSTEMS SAS Service Bulletin No.
470-32-841 K. PUBLICATION AFFECTED Airworthiness Limitation Section (ALS) Part 1 Illustrated Parts Catalog (IPC) 31-11-03 32-14-58 32-14-59 L. INTERCHANGEABILITY/MIXABILITY NOTE : The MLG leg "Pre-Modification" part numbers listed in the below table, include the series part numbers with a modification (-dash) suffix representing the latest modification incorporated in line with the SAFRAN Landing Gear- Database (product data management).
The barrel/hinge arm pin ALS Part 1 item can also be installed in MLG part numbers within the series listed, but with earlier part number suffixes.
In all cases the "Post-Modification" suffix from the below table is to be engraved on the modification plate. For MLG legs with earlier modification suffixes, gaps are to be left in the modification suffix numbering to indicate where intervening modifications are not incorporated.
Refer to the PCS-6000 of the SAFRAN LANDING SYST EMS Standard Practices.
Refer to the SAFRAN LANDING SYSTEMS S ervice Letter 000-32-002 for the identification of changes to the part numbers in service.
The interchangeability/mixability possibilities are for new or modified parts introduced by the accomplishment of this Service Bulletin.
DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 7 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
@A300-600
SERVICE BULLETIN
DESCRIPTION OLD PART N˚ NEW PART N˚ INT
MIXABILITY SEE NOTES Pin With Plate C66441 C66441-200 01 Not Applicable Pin With Plate C66441-2 C66441-200 01 Not Applicable Pin with Plate C66441-20 C66441-200 01 Not Applicable Leg Assy MLG D22497010-10 D22497010-11 01 Not Applicable Leg Assy MLG D22497011-3 D22497011-4 01 Not Applicable Leg Assy MLG D22497015-9 D22497015-10 01 Not Applicable Leg Assy MLG D22497020-8 D22497020-9 01 Not Applicable Leg Assy MLG D22497025-9 D22497025-10 01 Not Applicable Leg Assy MLG D22497030-5 D22497030-6 01 Not Applicable Leg Assy MLG D22497040-2 D22497040-3 01 Not Applicable Leg Assy MLG D22497150-5 D22497150-6 01 Not Applicable Leg Assy MLG D22497250-4 D22497250-5 01 Not Applicable Leg Assy MLG D23243000-5 D23243000-6 01 Not Applicable Leg Assy MLG D22498010-10 D22498010-11 01 Not Applicable Leg Assy MLG D22498011-3 D22498011-4 01 Not Applicable Leg Assy MLG D22498015-9 D22498015-10 01 Not Applicable Leg Assy MLG D22498020-8 D22498020-9 01 Not Applicable Leg Assy MLG D22498025-9 D22498025-10 01 Not Applicable Leg Assy MLG D22498030-5 D22498030-6 01 Not Applicable Leg Assy MLG D22498040-2 D22498040-3 01 Not Applicable Leg Assy MLG D22498145-5 D22498145-6 01 Not Applicable Leg Assy MLG D22498150-5 D22498150-6 01 Not Applicable DATE: Sep 24/19 SERVICE BULLETIN No.: A300-32-6120 REVISION No.: 00 - Sep 24/19 Page: 8 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.