Service bulletin · Airbus

No revision namedA320-25-1BXR R00 · 13 pages · 192 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1160, the docket of AD 2022-19-10. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-1160 (document 0002) · AD 2022-19-10

Manufacturer
Airbus
Type
Service Bulletin
Number
A320-25-1BXR

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 13

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1160, the docket of AD 2022-19-10. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '437d0d80bfd6dec601249b349ced476cd268ea280739a40e210e9716f69d616d'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 1

CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE

The content of this document is the property of Airbus. All rights including copyrights are reserved.

It is supplied in confidence and commercial security on its contents must be maintained.

It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.

It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.

MANDATORY MANDATORY MANDATORY ATA SYSTEM: 25 TITLE: EQUIPMENT/FURNISHINGS - AFT LAVATORIES - INSTALL MODIFIED

QUICK PIN FOR SMART LAVATORY HS MODIFICATION No.:

168952K33706

A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY REV 00 Sep 01/21 A320-25-1BXR Page 2 ATA SYSTEM: 25 TITLE: EQUIPMENT/FURNISHINGS - AFT LAVATORIES - INSTALL MODIFIED

QUICK PIN FOR SMART LAVATORY HS

SUMMARY This summary is for information only and is not approved for modification of the aircraft.

A. MODIFICATIONS

MODIFICATION CLASSIFICATION MAJOR None MINOR 168952K33706 NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.

NOTE: This modification is related to an airworthiness issue and has been re-classified and confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.

B. REASON

(1) History The quick release pin installed on the upper attachment of SMART HS-L41 and HS-L42 lavatories might not fulfill its designated purpose because its length is too short. The ball to secure the pin cannot extend completely and therefore the quick release pin might slip out of the bracket.

This would lead to a situation where the upper attachment connection from the lavatory to the aircraft would not be given.

(2) Objective/Action This Service Bulletin has been issued to inform the operator about the issue of the Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266 which details the replacement of the quick release pin.

(3) Advantages The accomplishment of this Service Bulletin will ensure the fulfillment of the requirements of JAR 25.561 (Emergency landing conditions).

(4) Operational/Maintenance Consequences None C. GENERAL EVALUATION

EVALUATION TABLE

COMPLIANCE MANDATORY COST SAVING NO

A/C OPERATION

AFFECTED

NO VENDOR SB YES

CANCELS INSPECTION SB NO ETOPS AFFECTED NO

PAX COMFORT AFFECTED NO POTENTIAL AD YES

RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO

A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY REV 00 Sep 01/21 A320-25-1BXR Page 3

EVALUATION TABLE

LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO NOTE: Service Bulletin must be accomplished.

D. MAINTENANCE CONFIGURATION No specific aircraft maintenance configuration required.

E. MATERIAL PRICE INFORMATION

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories No material F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):

AAR ALK CQN KZR RZO SJX TSC G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories

AIRCRAFT NO

EQUIPMENT YES I. MANPOWER

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories

MANPOWER TOTAL MAN-HOURS 0.50 h ELAPSED TIME (HOURS) 0.50 h Additional man-hours related to Vendor SB; refer to:

Replace the Quick Release Pin on the Upper Attachment for Lavatories Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266

A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY Figure ICN-A320-A-25XX1BXR-A-FAPE3-0294Q-A-001-01 Fig.SA Sol.AA SHEET 1/1 REV 00 Sep 01/21 A320-25-1BXRGeneral Overview Page 4 J. GENERAL OVERVIEW

CONF ALL

REPLACEMENT OF THE QUICK RELEASE PIN

ON UPPER ATTACHMENT A FR62 FR70 , Z250 Z260 A A

LH SHOWN

RH SYMMETRICAL ICN-A320-A-25XX1BXR-A-FAPE3-0294Q-A-001-01

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 5 ATA SYSTEM: 25 TITLE: EQUIPMENT/FURNISHINGS - AFT LAVATORIES - INSTALL MODIFIED

QUICK PIN FOR SMART LAVATORY HS

1. PLANNING INFORMATION A. APPLICABILITY NOTE: This modification is applicable by Service Bulletin only.

(1) Models ON A/C 07663, 07697, 07891, 08106 321-251N ON A/C 08910, 09226 321-251NX ON A/C 09147, 09208, 09314 321-252NX ON A/C 07972, 08051 321-253N ON A/C 08796, 08993, 09008, 09365 321-253NX ON A/C 08755, 08837, 08876, 09198, 09278 321-271NX

CONF ALL

(2) Applicability by MSN 07663 07697 07891 07972 08051 08106 08755 08796 08837 08876 08910 08993 09008 09147 09198 09208 09226 09278 09314 09365

(3) MSN by configuration

MSN CONFIGURATION 07663 07697 07891 07972 08051 08106 08755 08796 08837 08876 08910 08993 09008 09147 09198 09208 09226 09278 09314 09365 001

(4) Configuration definition Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.

CONF 001 retrofits following modifications: 168952K33706.

B. CONCURRENT REQUIREMENTS None C. REASON

(1) History The quick release pin installed on the upper attachment of SMART HS-L41 and HS-L42 lavatories might not fulfill its designated purpose because its length is too short. The ball to secure the pin cannot extend completely and therefore the quick release pin might slip out of the bracket.

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 6 This would lead to a situation where the upper attachment connection from the lavatory to the aircraft would not be given.

(2) Objective/Action This Service Bulletin has been issued to inform the operator about the issue of the Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266 which details the replacement of the quick release pin.

(3) Advantages The accomplishment of this Service Bulletin will ensure the fulfillment of the requirements of JAR 25.561 (Emergency landing conditions).

(4) Operational/Maintenance Consequences None D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories 1 Replace the Quick Release Pin on the Upper Attachment for Lavatories E. COMPLIANCE

(1) Classification MANDATORY: Service Bulletin must be accomplished.

(2) Accomplishment Timescale This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Union Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the thresholds given but reference should be made to the AD for confirmation of the mandated accomplishment timescale.

Accomplishment of this Service Bulletin must be done within 12 months from Vendor Service Bulletin A2-254-25-266 dispatch.

F. APPROVAL The technical content of this document is approved under the authority of the Design Organisation Approval ref. EASA.21J.031.

If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.

G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 7

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories

PREPARATION Job Set-up 0.25 h

PROCEDURE

PREPARATION FOR TEST None TEST None

CLOSE-UP Close-up 0.25 h TOTAL MAN-HOURS 0.50 h ELAPSED TIME (HOURS) 0.50 h Additional man-hours related to Vendor SB; refer to:

Replace the Quick Release Pin on the Upper Attachment for Lavatories Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266 H. WEIGHT AND BALANCE Not changed I. ELECTRICAL LOAD DATA Not changed J. REFERENCES

(1) Modification of the Smart HS-L41 and HS-L42 Lavatories

(a) T ask set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories

AIRCRAFT MAINTENANCE MANUAL (AMM) 06-20-00, Page Block 001 06-31-53, Page Block 001 T ask 12-34-24-869-002

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM) 20-55-00

VENDOR SERVICE BULLETIN (VSB) DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266 K. PUBLICATION AFFECTED

ILLUSTRATED PART CATALOG (IPC) L. INDUSTRY SUPPORT INFORMATION AIRBUS will not provide industry support for accomplishment of this Service Bulletin.

Refer to Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266 for the industry support terms of the Vendor Service Bulletin parts and labor.

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 8

2. MATERIAL INFORMATION A. MATERIAL APPLICABILITY No material for task set A320-A-25-XX-1BXR-04000-93AA-A Modification of the Smart HS-L41 and HS-L42 Lavatories B. TOOLING No tools C. CONSUMABLES No consumables D. LIST OF NEW PARTS No parts E. LIST OF EXISTING PARTS No parts

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 9

3. ACCOMPLISHMENT INSTRUCTIONS Task set A320-A-25-XX-1BXR-04000-93AA-A (A320-A-25-XX-1BXR-04ZZZ-93AZ-A) Modification of the Smart HS-L41 and HS-L42 Lavatories WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.

CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL

WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR

MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:

- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS NECESSARY ON WIRING AND COMPONENTS.

- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER CONTAMINATION.

THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.

IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.

NOTE: The accomplishment instructions of this Service Bulletin include procedures given in other documents or in other sections of the Service Bulletin. When the words “refer to” are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words “in accordance with” are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.

Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the Service Bulletin is met within the set parameters.

NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer to paragraph 1.J., References, for the definition of acronyms.

NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment instructions are Required for Compliance (RC) and must be done to comply with the AD.

T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from, done as part of other actions or done with accepted methods different from those given in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be put back into a serviceable condition.

NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary to ensure the continued airworthiness of the aircraft.

For any deviations to the instructions, including Required for Compliance paragraph contained herein, contact AIRBUS for further instructions and approval.

A. TASK SET ASSOCIATED INFORMATION Task Manpower TOTAL MAN-HOURS 0.50 h ELAPSED TIME (HOURS) 0.50 h Additional man-hours related to Vendor SB; refer to:

DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 10 B. PREPARATION

(1) Task A320-A-25-XX-1BXR-01001-540A-A (A320-A-25-XX-1BXR-01ZZZ-540Z-A) Job Set-up Job Set-Up Information Manpower/Resources/Skills Man-hours 0.25 h Minimum Number of person 1 Elapsed Time 0.25 h Referenced Information Manuals/Drawings References/Sheets AMM T ask 12-34-24-869-002 Procedure NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction - Aircraft status for maintenance" in Manual Front Matter section.

(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM T ask 12-34- 24-869-002.

(b) Get access to the smart HS-L41 and HS-L42 lavatory area.

C. PROCEDURE

(1) Task A320-A-25-XX-1BXR-01001-920A-A (A320-A-25-XX-1BXR-01ZZZ-920Z-A) Replace the Quick Release Pin on the Upper Attachment for Lavatories Job Set-Up Information Working Area Impacted Zone Access / Work Location 250 Work location From Frame 62 to Frame 64 260 Work location From Frame 64 to Frame 70 Referenced Information Manuals/Drawings References/Sheets AMM 06-20-00, Page Block 00106-31-53, Page Block 001 VSB DIEHL AVIATION HAMBURG GMBH (C5270)VSB A2-254-25-266 Procedure

(a) Standard practices given in this procedure:

1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.

2 For the Frame (FR) identification, refer to Ref. AMM 06-31-53, Page Block

001.

(b) Replace the quick release pin installed on the upper attachment for smart HS- L41 and HS-L42 lavatories in accordance with Ref. DIEHL AVIATION HAMBURG GMBH (C5270) VSB A2-254-25-266.

D. PREPARATION FOR TEST None

A318/A319/A320/A321

SERVICE BULLETIN REV 00 Sep 01/21 A320-25-1BXR Page 11 E. TEST None F. CLOSE-UP

(1) Task A320-A-25-XX-1BXR-01001-740A-A (A320-A-25-XX-1BXR-01ZZZ-740Z-A) Close-up Job Set-Up Information Manpower/Resources/Skills Man-hours 0.25 h Minimum Number of person 1 Elapsed Time 0.25 h Procedure

(a) Make sure that the work areas are clean and clear of tools and other items of equipment.

(b) Put the aircraft back to its initial configuration.

G. ADMINISTRATIVE

(1) Task A320-A-25-XX-1BXR-01001-90AA-A (A320-A-25-XX-1BXR-01ZZZ-90AZ-A) Administrative Procedure Confirm in the applicable aircraft records that you have completed all the work defined in this Service Bulletin task set as required.

A318/A319/A320/A321

SERVICE BULLETIN

APPENDIX REV 00 Sep 01/21 A320-25-1BXR Page 12

APPENDIX A. REPORTING SHEET TITLE: EQUIPMENT/FURNISHINGS - AFT LAVATORIES - INSTALL MODIFIED

QUICK PIN FOR SMART LAVATORY HS MODIFICATION No.: 168952K33706

(1) SB Reporting status This Service Bulletin will only be incorporated into affected customized Maintenance and Flight Operations Products if it is duly reported to Airbus.

(2) GENERAL information The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding: the SB Reporting means and benefits, the update of customized Maintenance Products and customized Flight Operations Products.

If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for further information on the update of affected Flight Operations Products.

(3) SB Reporting procedure Standard practice to report SB is to use the online reporting application on AirbusWorld.

Refer to ISI 00.00.00179:

- For complete information on reporting means to Airbus, Question 2 "What are the standard practices for SB Reporting?"

- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about the reporting of prerequisite Service Bulletins?"

NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.

It is revised on a regular basis.