Copy · U.S. DOT/FAA - SB A320-53-1285-00 · 41 pages

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0486; AD 2014-15-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Text

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bb7cfde08c5e8b1955fea62960e835516b845f9c66ba0de80baf47d997d428eb'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY AIRBUS

CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1 This summary is for information only and is not approved for modification of the aircraft.

ATA SYSTEM: 53 TITLE: FUSELAGE - MAIN STRUCTURE - INSPECTION FOR MISSING FASTENERS AT FR24 BETWEEN STR17 & STR18 **CONF ALL

MODIFICATIONS None

REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES On MSN 5255, at VIP cabin customization at manufacturers site, several fasteners and an angle PN D5323006520103 were found missing at right hand side on FR24 between STR17 and STR18 during inspections.

An inspection is therefore needed on 70 Aircraft potentially impacted by this issue.

This Service Bulletin recommends doing special detailed inspections for missing fasteners and missing splice. The special detailed inspections consists in rototest under insulation blankets in case of missing parts.

Accomplishment of this Service Bulletin will clarify the build status at the identified location and restore it conform to the applicable design standard when needed.

GENERAL EVALUATION

EVALUATION TABLE

COMPLIANCE RECOMMENDED (1)

CANCELS INSPECTION SB NO

POTENTIAL AD YES

A/C OPERATION AFFECTED NO

RELIABILITY AFFECTED NO

PAX COMFORT AFFECTED NO

COST SAVING NO

ETOPS AFFECTED NO

STRUCTURAL LIFE EXTN NO

VENDOR SB INVOLVED NO NOTE

(1) : Service Bulletin recommended to be accomplished to prevent significant operational disruptions.

DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 1 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY

MATERIAL PRICE INFORMATION

MATERIAL PRICE INFORMATION TABLE

MATERIAL SET

QTY PER A/C

PRICE PER

A/C (USD)

MAIN PARTS Component COMPA01 1 See SB Rivet, Bush.

Component COMPA02 1 See SB Splice

EFFECTIVITY This Service Bulletin is applicable to this (these) operator(s) :

54S AAR ABY AFL AXM AZA BER CCA CEB CES CRK CSC CSN

DLH EZY GFA GOW HKE HVN IAW IGO JJP JST LAN MEA ONE

QTR RJD SLK SVA TAI TAM TBA THA THY USA

CONCURRENT REQUIREMENTS None

REFERENCES / REPERCUSSIONS TFU None OEB None AOT None SIL None

LINE MAINTENANCE AFFECTED No

LIFE LIMIT None OTHER None

NATURE OF THE WORK

AIRCRAFT YES

EQUIPMENT NO HARD NO SOFT NO OBRM NO

MANPOWER Task 531285-832-801-001: Inspection

TOTAL MANHOURS

39.00

ELAPSED TIME (HOURS)

39.00

APPENDICES None DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 2 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY **CONF ALL

AREA TO BE INSPECTED A Z232 NOTE:

A FR24 STGR18 B N_SB_531285_5_SAAA_01_01 Figure A-FSAAA - Sheet 01 DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 3 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY **CONF ALL C FR24 FR25FR23 STGR17 STGR18 STGR17 STGR18 FR24 FWD B C E D N_SB_531285_5_SAAA_02_01 Figure A-FSAAA - Sheet 02 DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 4 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY **CONF ALL STGR17 STGR18 FR24

VIEW LOOKING AFT D NOTE:

MISSING FASTENERS STGR18 FR24

PART MISSING E N_SB_531285_5_SAAA_03_01 Figure A-FSAAA - Sheet 03 DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 5 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

SUMMARY This Page Intentionally Left Blank DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 6 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN AIRBUS

CUSTOMER SERVICES DIRECTORATE 1 Rond Point Maurice Bellonte 31707 BLAGNAC CEDEX FRANCE T e l:( 3 3 )56 19 33 33 3 Telex : AIRBU 530526F F a x:( 3 3 )56 19 34 25 1 ATA SYSTEM: 53 TITLE: FUSELAGE - MAIN STRUCTURE - INSPECTION FOR MISSING FASTENERS AT FR24 BETWEEN STR17 & STR18 MODIFICATION No.: None This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with any information contained in it. It is delivered on the express condition that said document and the information contained in it shall be treated as confidential, shall not be used for any purpose other than that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall not be duplicated in any manner (except for the purposes of performing the tasks described hereunder and provided that any recipient of such document shall comply with the conditions herein), without AIRBUS prior written consent.

1. PLANNING INFORMATION **CONF ALL A. EFFECTIVITY

(1) Models 319-111 319-112 319-115 319-132 319-133 320-214 320-216 320-232 320-233 321-211 321-231 321-232

(2) Effectivity by MSN 5230-5294 5296-5300

(3) Effectivity by Operator The Operator/MSN relationship is provided for information only and is correct at the time of issue in accordance with the information available to AIRBUS. Any future changes resulting from transfer of an aircraft from one operator to another will not be reflected in this list unless the Service Bulletin is revised for another reason.

OPERATOR MSN 54S 5261 AAR 5287 ABY 5276 AFL 5271 AXM 5272 5283 DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 1 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

OPERATOR MSN AZA 5294 BER 5246 5252 CCA 5265 CEB 5250 CES 5242 5267 5273 CRK 5260 CSC 5233 5286 CSN 5237 5268 5279 5288 DLH 5239 5284 5293 EZY 5236 5249 5289 GFA 5257 GOW 5232 HKE 5264 5266 HVN 5241 5247 5251 5275 5297 IAW 5290 IGO 5230 5231 5259 5262 5291 5298 JJP 5245 5274 5281 JST 5270 LAN 5234 5263 MEA 5253 ONE 5278 5299 QTR 5255 RJD 5277 SLK 5296 SVA 5285 TAI 5238 5243 5280 TAM 5240 TBA 5256 THA 5248 5258 THY 5254 USA 5235 5244 5269 5282 5292 5300

(4) Configuration by MSN MSN

CONFIGURATION 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5296 5297 5298 5299 5300 001

(5) Configuration definition **CONF 001 Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a standard configuration.

DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 2 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN

(6) Material Effectivity

MATERIAL

QTY PER A/C

SEE NOTES Component COMPA01 1 Component COMPA02 1 Consumable CMLA01 1 B. CONCURRENT REQUIREMENTS None C. REASON

(1) History On MSN 5255, at VIP cabin customization at manufacturers site, several fasteners and an angle PN D5323006520103 were found missing at right hand side on FR24 between STR17 and STR18 during inspections.

An inspection is therefore needed on 70 Aircraft potentially impacted by this issue.

(2) Objective/Action This Service Bulletin recommends doing special detailed inspections for missing fasteners and missing splice. The special detailed inspections consists in rototest under insulation blankets in case of missing parts.

(3) Advantages Accomplishment of this Service Bulletin will clarify the build status at the identified location and restore it conform to the applicable design standard when needed.

(4) Operational/Maintenance Consequences None D. DESCRIPTION To accomplish this Service Bulletin it is necessary to :

Task 531285-832-801-001: Inspection

(1) Do a General Visual Inspection of FR 24 between STGR 17 and 18 RH side.

(2) Depending on Inspection Results: Remove the Fasteners of FR 24 between STGR 17 and 18 RH side.

(3) Do a Rototest Inspection of the Fastener Holes at FR 24 between STGR 17 and 18 RH side.

(4) Depending on Inspection Results: Reinstall Fasteners and Splice at FR 24 between STGR 17 and 18 RH side.

DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 3 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN E. COMPLIANCE

(1) Classification RECOMMENDED: Service Bulletin recommended to be accomplished to prevent significant operational disruptions.

(2) Accomplishment Timescale This Service Bulletin has been classified Recommended. It is expected that an Airworthiness Directive (AD) published by the European Aviati on Safety Agency (EASA) will be issued to change this classification to Mandatory. It is anticipated that the AD will confirm the thresholds given below but reference should be made to the AD for confirmation of the mandated accomplishment timescale.

Table 1, Config.001: Inspection of Frame 24 between stringer 17 and stringer 18 RH side Condition Action Compliance Time Repetitive Interval All Aircraft Do a General Visual Inspection of Frame 24 between stringer 17 and stringer 18 RH side, refer to TASK 531285-832-801 001 Inspection Within 5000 FC from entry into service None No missing fasteners and/or splice No further action None None Remove fasteners of holes 1 to 44, refer to SUBTASK 531285-831-001 001 Depending on Inspection Results: Remove the Fasteners of FR 24 between STGR 17 and 18 RH side.

and Before next flight None Missing fasteners and/or splice Do the rototest inspection of all holes, refer to SUBTASK 531285-832-002 001 Do a Rototest Inspection of the Fastener Holes at FR 24 between STGR 17 and 18 RH side.

Before next flight None If crack is found Contact Airbus for further action Before next flight None DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 4 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN Table 1, Config.001: Inspection of Frame 24 between stringer 17 and stringer 18 RH side Condition Action Compliance Time Repetitive Interval Reinstall fasteners and splice, refer to SUBTASK 531285-831-002 001 Depending on Inspection Results: Reinstall Fasteners and Splice at FR 24 between STGR 17 and 18 RH side. SUBTASK 531285-831-002-001 and Before next flight None If no crack is found No further action None None F. APPROVAL The technical content of this document is approved under the authority of Design Organisation Approval No. EASA.21J.031.

If an aircraft listed in the effectivity has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.

G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.

Task 531285-832-801-001: Inspection Get Access

4.00 On Aircraft Do a General Visual Inspection of FR 24 between STGR 17 and 18 RH side.

0.25 Depending on Inspection Results: Remove the Fasteners of FR 24 between STGR 17 and 18 RH side.

6.50 Do a Rototest Inspection of the Fastener Holes at FR 24 between STGR 17 and 18 RH side.

12.00 Depending on Inspection Results: Reinstall Fasteners and Splice at FR 24 between STGR 17 and 18 RH side.

12.00 Close-Up

4.25

TOTAL MANHOURS

39.00

ELAPSED TIME (HOURS)

39.00 NOTE : The minimum manhours necessary to accomplish this Service Bulletin are DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 5 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

@A318/A319/A320/A321

SERVICE BULLETIN those for the Inspection. Depending on the inspection result, additional manhours can apply.

H. WEIGHT AND BALANCE Not Changed I. ELECTRICAL LOAD DATA Not Changed J. REFERENCES Aircraft Maintenance Manual (AMM) 06-20-00 06-31-53 12-34-24 20-21-11 25-21-41 25-23-43 25-23-44 25-80-00 52-10-00 Elec. Std. Practices Manual (ESPM) 20-55-00 Non Destructive Test Manual (NTM) 51-10-01 Standards Manual (SM) Structural Repair Manual (SRM) 51-24-00 51-42-00 51-43-00 51-44-00 K. PUBLICATION AFFECTED Aircraft Maintenance Manual (AMM) 53-21-00 Impact on scheduled maintenance: Refer to Maintenance Planning Document (MPD).

L. INTERCHANGEABILITY/MIXABILITY Not Applicable M. SPARES None DATE: Jan 29/14 SERVICE BULLETIN No.: A320-53-1285 REVISION No.: 00 - Jan 29/14 Page: 6 5 Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

Pages 13–24 of 41