Service bulletin · Airbus

No revision namedA340-32-4321 R00 · 60 pages · 674 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1166, the docket of AD 2023-01-03. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-1166 (document 0006) · AD 2023-01-03

Manufacturer
Airbus
Type
Service Bulletin
Number
A340-32-4321

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 60

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1166, the docket of AD 2023-01-03. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '75269841376e4419a18bfa669fbb9b3ac666cbe28607ea025dba091f7dc0c550'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 1

CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE

The content of this document is the property of Airbus. All rights including copyrights are reserved.

It is supplied in confidence and commercial security on its contents must be maintained.

It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.

It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.

MANDATORY MANDATORY MANDATORY ATA SYSTEM: 32 TITLE: LANDING GEAR - MAIN AND NOSE GEARS - INSPECTION FOR PARTS WITH 300M MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION

REQUIREMENTS MODIFICATION No.:

None

A340

SERVICE BULLETIN

SUMMARY REV 00 Jan 18/22 A340-32-4321 Page 2 ATA SYSTEM: 32 TITLE: LANDING GEAR - MAIN AND NOSE GEARS - INSPECTION FOR PARTS WITH 300M MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION

REQUIREMENTS

SUMMARY This summary is for information only and is not approved for modification of the aircraft.

A. MODIFICATIONS

MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.

B. REASON

(1) History In 2020, a quality escape was disclosed by Aubert & Duval, a Safran Landing Systems forging supplier, regarding incorrect reporting of fatigue test results for large 300M steel forgings delivered between January 2011 and December 2018.

As a result of this process deviation, forgings that would normally have been rejected for disposition were instead delivered to SLS, and used in the manufacture of landing gear parts that are currently installed on AIRBUS Aircraft (A/C) operating in-service.

The parts affected are Main Landing Gear (MLG) main fittings, MLG sliding pistons and Nose Landing Gear (NLG) main fittings (principal structural element components). If the determined safe-life of these suspect components is exceeded, subsequent failure could lead to a potentially unsafe condition during operation of the aircraft.

(2) Objective/Action This Inspection Service Bulletin is published to list the Part Numbers (PN) and Serial Numbers (SN) affected by the quality escape and to specify the revised safe-lives for the affected MLG main fittings, MLG sliding pistons and NLG main fittings.

(3) Advantages Accomplishment of this Service Bulletin will identify the parts that are affected by the quality escape and provide the revised safe-lives.

(4) Operational/Maintenance Consequences Depending on the inspection result, this Service Bulletin concerns the airworthiness limitations of Airworthiness Limitation Section (ALS) Part 1 which is introduced within the A/C maintenance program under the operator responsibility. Please download the relevant ALS variation on AirbusWorld.

C. GENERAL EVALUATION

EVALUATION TABLE

COMPLIANCE MANDATORY COST SAVING NO

A/C OPERATION

AFFECTED

NO VENDOR SB NO

A340

SERVICE BULLETIN

SUMMARY REV 00 Jan 18/22 A340-32-4321 Page 3

EVALUATION TABLE

CANCELS INSPECTION SB NO ETOPS AFFECTED NO

PAX COMFORT AFFECTED NO POTENTIAL AD YES

RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO

LIFE LIMIT YES LINE MAINTENANCE AFFECTED NO NOTE: Service Bulletin must be accomplished.

D. MAINTENANCE CONFIGURATION No specific aircraft maintenance configuration required.

E. MATERIAL PRICE INFORMATION

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required No material F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):

15R 17M 26L 31V 32J 34N 35I 36L 65W 68M 72T 82M 84W 90O 98W ABB ABD AIB ARG AXY BOE DLH EDW F2I GAF GJM HFM IRC IRM KAC KMF M3R MDG MRJ MSR PUE QQE ROI S3R SAA SAS SFB SGD SPD SWR SYR U6A VCV G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

AIRCRAFT YES

EQUIPMENT YES I. MANPOWER

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

MANPOWER TOTAL MAN-HOURS 3.50 h

A340

SERVICE BULLETIN

SUMMARY REV 00 Jan 18/22 A340-32-4321 Page 4

MANPOWER ELAPSED TIME (HOURS) 2.50 h

A340

SERVICE BULLETIN

SUMMARY Figure ICN-A340-A-32XX4321-A-FAPE3-01B7B-A-002-01 Fig.SA Sol.AA SHEET 1/1 REV 00 Jan 18/22 A340-32-4321General Overview Page 5 J. GENERAL OVERVIEW

CONF ALL A NOTE:

INSPECTION AREA Z730 Z740Z710 A B

INSPECTION OF THE PN

AND SN ON THE

NLG MAIN FITTINGS

INSPECTION OF THE

PN AND SN ON THE

ENHANCED MLG

MAIN FITTINGS

AND ENHANCED MLG

SLIDING PISTONS B

LH SHOWN

RH SYMMETRICAL ICN-A340-A-32XX4321-A-FAPE3-01B7B-A-002-01

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 6 ATA SYSTEM: 32 TITLE: LANDING GEAR - MAIN AND NOSE GEARS - INSPECTION FOR PARTS WITH 300M MATERIAL PROPERTIES OUTSIDE OF SPECIFICATION

REQUIREMENTS

1. PLANNING INFORMATION A. APPLICABILITY

(1) Models ON A/C 0026, 0031, 0063, 0074, 0075, 0080, 0081 340-211 ON A/C 0009, 0014, 0022, 0038, 0043, 0046, 0061, 0156, 0159, 0178 340-212 ON A/C 0004, 0151, 0204 340-213 ON A/C 0002, 0020, 0029, 0056, 0078, 0084, 0115 340-311 ON A/C 0047, 0051, 0076, 0094, 0367, 0374, 0381 340-312 ON A/C 0089, 0090, 0093, 0101, 0104, 0117, 0123, 0125, 0126, 0128, 0134, 0135, 0145, 0146, 0158, 0164, 0170, 0175, 0179, 0180, 0185, 0186, 0190, 0192-0194, 0197, 0199, 0201, 0202, 0207, 0208, 0210, 0212, 0213, 0215, 0217, 0221, 0233, 0236, 0237, 0242, 0243, 0245, 0246, 0252, 0257, 0260, 0264, 0268, 0270, 0274, 0278, 0280, 0282, 0292, 0297, 0302, 0304, 0310, 0318, 0319, 0321, 0325, 0327, 0329, 0331, 0332, 0335, 0347, 0354, 0355, 0373, 0377-0379, 0385, 0387, 0390, 0395, 0399, 0402, 0406, 0411, 0413, 0415, 0424, 0430, 0434, 0435, 0438, 0446, 0447, 0450, 0459, 0467, 0470, 0474, 0483, 0528, 0538, 0541, 0544-0546, 0554, 0556, 0559, 0561, 0562, 0582, 0585, 0590, 0598, 0643, 0646, 0651, 0668, 0793, 0800, 0835, 0844, 0921, 0938, 0955 340-313

CONF ALL

(2) Applicability by MSN 0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0043 0046 0047 0051 0056 0061 0063 0074-0076 0078 0080 0081 0084 0089 0090 0093 0094 0101 0104 0115 0117 0123 0125 0126 0128 0134 0135 0145 0146 0151 0156 0158 0159 0164 0170 0175 0178-0180 0185 0186 0190 0192-0194 0197 0199 0201 0202 0204 0207 0208 0210 0212 0213 0215 0217 0221 0233 0236 0237 0242 0243 0245 0246 0252 0257 0260 0264 0268 0270 0274 0278 0280 0282 0292 0297 0302 0304 0310 0318 0319 0321 0325 0327 0329 0331 0332 0335 0347 0354 0355 0367 0373 0374 0377-0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413 0415 0424 0430 0434 0435 0438 0446 0447 0450 0459 0467 0470 0474 0483 0528 0538 0541 0544-0546 0554 0556 0559 0561 0562 0582 0585 0590 0598 0643 0646 0651 0668 0793 0800 0835 0844 0921 0938 0955

(3) MSN by configuration

MSN CONFIGURATION 0002 0004 0009 0014 0020 0022 0026 0029 0031 0038 0043 0046 0047 0051 0056 0061 0063 0074 0075 0076 0078 0080 0081 0084 0089 0090 0093 0094 0101 0104 0115 0117 0123 0125 0126 0128 0134 0135 0145 0146 0151 0156 0158 0159 0164 0170 0175 0178 0179 0180 0185 0186 0190 0192 0193 001

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 7

MSN CONFIGURATION 0194 0197 0199 0201 0202 0204 0207 0208 0210 0212 0213 0215 0217 0221 0233 0236 0237 0242 0243 0245 0246 0252 0257 0260 0264 0268 0270 0274 0278 0280 0282 0292 0297 0302 0304 0310 0318 0319 0321 0325 0327 0329 0331 0332 0335 0347 0354 0355 0367 0373 0374 0377 0378 0379 0381 0385 0387 0390 0395 0399 0402 0406 0411 0413 0415 0424 0430 0434 0435 0438 0446 0447 0450 0459 0467 0470 0474 0483 0528 0538 0541 0544 0545 0546 0554 0556 0559 0561 0562 0582 0585 0590 0598 0643 0646 0651 0668 0793 0800 0835 0844 0921 0938 0955

(4) Configuration definition Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.

B. CONCURRENT REQUIREMENTS None C. REASON

(1) History In 2020, a quality escape was disclosed by Aubert & Duval, a Safran Landing Systems forging supplier, regarding incorrect reporting of fatigue test results for large 300M steel forgings delivered between January 2011 and December 2018.

As a result of this process deviation, forgings that would normally have been rejected for disposition were instead delivered to SLS, and used in the manufacture of landing gear parts that are currently installed on AIRBUS Aircraft (A/C) operating in-service.

The parts affected are Main Landing Gear (MLG) main fittings, MLG sliding pistons and Nose Landing Gear (NLG) main fittings (principal structural element components). If the determined safe-life of these suspect components is exceeded, subsequent failure could lead to a potentially unsafe condition during operation of the aircraft.

(2) Objective/Action This Inspection Service Bulletin is published to list the Part Numbers (PN) and Serial Numbers (SN) affected by the quality escape and to specify the revised safe-lives for the affected MLG main fittings, MLG sliding pistons and NLG main fittings.

(3) Advantages Accomplishment of this Service Bulletin will identify the parts that are affected by the quality escape and provide the revised safe-lives.

(4) Operational/Maintenance Consequences Depending on the inspection result, this Service Bulletin concerns the airworthiness limitations of Airworthiness Limitation Section (ALS) Part 1 which is introduced within the A/C maintenance program under the operator responsibility. Please download the relevant ALS variation on AirbusWorld.

D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 8

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required 1 Inspect the PN and SN on the Enhanced MLG Main Fitting, LH side and Apply the New Safe-life Limitation if needed 2 Inspect the PN and SN on the Enhanced MLG Sliding Pistons, LH side and Apply the New Safe-life Limitation if needed 3 Inspect the PN and SN on the Enhanced MLG Main Fitting, RH side and Apply the New Safe-life Limitation if needed 4 Inspect the PN and SN on the Enhanced MLG Sliding Pistons, RH side and Apply the New Safe-life Limitation if needed 5 Inspect the PN and SN on the NLG Main Fittings and Apply the New Safe-life Limitation if needed E. COMPLIANCE

(1) Classification MANDATORY: Service Bulletin must be accomplished.

(2) Accomplishment Timescale Accomplishment of this Service Bulletin must be done in accordance with the accomplishment timescale given in the below compliance table.

This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness Directive (AD) published by the European Union Aviation Safety Agency (EASA) will be issued to confirm this classification. It is anticipated that the AD will confirm the thresholds given but reference should be made to the AD for confirmation of the mandated accomplishment timescale.

T able 1, CONF 001 - General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required.

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL All aircraft Identify the PN and SN of the enhanced MLG main fittings, enhanced MLG sliding pistons, LH and RH side and NLG main fittings, installed on aircraft in accordance with Ref. T ask set A340-A- 32-XX-4321- 01ZZZ-93BZ-A Within three months from Inspection Service Bulletin issuance, identify the PN and SN installed on aircraft None None If the parts (PN and SN) are identified in the affected Identify the Weight Variant (WV) of the aircraft, refer None None None

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 9

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL component list, refer to Appendix 01 to Appendix 03

- DEFINITIONS

AND FORMULAS For each affected part, determine the safe-life limitation, refer to Appendix 02 -

REVISED SAFE-

LIVES FOR THE

AFFECTED PARTS None None None Apply the revised safelife limitation None None None No further action with this Service Bulletin None None None If the parts (PN and SN) are not identified in the affected component list, refer to Appendix 01 Refer to ALS part 1 for safelife limitation None None None No further action with this Service Bulletin None None None NOTE: If a part has previously been supplied under concession or life limit and the PN and SN combination is not listed, refer to Appendix 01 - AFFECTED MLG MAIN FITTINGS, LH SIDE, Appendix 01 - AFFECTED MLG MAIN FITTINGS, RH SIDE, Appendix 01 - AFFECTED MLG SLIDING PISTONS and Appendix 01 - AFFECTED NLG MAIN FITTINGS then refer to the applicable concession documentation to determine the remaining life of the part.

NOTE: One time inspection to identify the PN and SN installed on aircraft.

F. APPROVAL The technical content of this document is approved under the authority of the Design Organisation Approval ref. EASA.21J.031.

If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.

G. MANPOWER The manpower estimates given in this Service Bulletin are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacture and procurement of parts

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 10 and tools, drying times for paints, sealants, etc., and general administration work are also not included.

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

PREPARATION Job Set-up 0.50 h

PROCEDURE Inspect the PN and SN on the Enhanced MLG Main Fitting, LH side and Apply the New Safe-life Limitation if needed

0.50 h Inspect the PN and SN on the Enhanced MLG Sliding Pistons, LH side and Apply the New Safe-life Limitation if needed

0.50 h Inspect the PN and SN on the Enhanced MLG Main Fitting, RH side and Apply the New Safe-life Limitation if needed

0.50 h Inspect the PN and SN on the Enhanced MLG Sliding Pistons, RH side and Apply the New Safe-life Limitation if needed

0.50 h Inspect the PN and SN on the NLG Main Fittings and Apply the New Safe-life Limitation if needed

0.50 h

PREPARATION FOR TEST None TEST None

CLOSE-UP Close-up 0.50 h TOTAL MAN-HOURS 3.50 h ELAPSED TIME (HOURS) 2.50 h NOTE: For an explanation of the man-hours and elapsed time, refer to the Gantt Chart given in Appendix 04 - MANPOWER GANTT CHART.

NOTE: The minimum man-hours necessary to accomplish this Service Bulletin are those for the Inspection. Depending on the inspection result, additional man-hours can apply.

H. WEIGHT AND BALANCE Not changed I. ELECTRICAL LOAD DATA Not changed J. REFERENCES

(1) General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 11

(a) T ask set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required

AIRCRAFT MAINTENANCE MANUAL (AMM) 06-20-00, Page Block 001 T ask 12-34-24-860-802 T ask 32-11-00-220-801 T ask 32-21-00-220-801

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM) 20-55-00 K. PUBLICATION AFFECTED None L. INDUSTRY SUPPORT INFORMATION AIRBUS will not provide industry support for accomplishment of this Service Bulletin.

A340

SERVICE BULLETIN REV 00 Jan 18/22 A340-32-4321 Page 12

2. MATERIAL INFORMATION A. MATERIAL APPLICABILITY No material for task set A340-A-32-XX-4321-01000-93BA-A General Visual Inspect of the PN and SN on the Enhanced MLG Main Fittings, Enhanced MLG Sliding Pistons and NLG Main Fittings and Revision of the Safe-lives Limitations if required B. TOOLING No tools C. CONSUMABLES No consumables D. LIST OF NEW PARTS No parts E. LIST OF EXISTING PARTS No parts