Service bulletin · Airbus

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

Revision 01A350-36-P029R1 · 59 pages · 1.1 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0023, the docket of AD 2023-06-12. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2023-0023 (document 0005) · AD 2023-06-12

SB A350-36-P029SB A350-36-P029 · 118 pages · 1.2 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-0965, the docket of AD 2021-08-08. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2020-0965 (document 0005) · AD 2021-08-08

Manufacturer
Airbus
Type
Service Bulletin
Number
A350-36-P029
Latest revision known
A350-36-P029, Revision 01, dated February 3, 2022

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 1 proposed AD.

Text · 59

Revision 01, the newest copy. From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0023, the docket of AD 2023-06-12. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bdd32e31ea51a5864210b888b0410781f2d2ef8fc543841545354691e2c9ea91'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 1

CONF ALL AIRBUS 2, ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE

The content of this document is the property of Airbus. All rights including copyrights are reserved.

It is supplied in confidence and commercial security on its contents must be maintained.

It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be disclosed to unauthorized persons.

It must not be reproduced in whole or in part without permission in writing from the owners of the copyright. Requests for reproduction of any data in this document and the media authorized for it must be addressed to Airbus.

MANDATORY MANDATORY MANDATORY ATA SYSTEM: 36 TITLE: PNEUMATIC - DISTRIBUTION - INSPECTION OF THE GIMBAL ABS0736 MODIFICATION No.:

None

A350

SERVICE BULLETIN

REVISION TRANSMITTAL SHEET REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 2 ATA SYSTEM: 36 TITLE: PNEUMATIC - DISTRIBUTION - INSPECTION OF THE GIMBAL ABS0736

REVISION TRANSMITTAL SHEET This page transmits Revision No. 01 of Service Bulletin No. A350-36-P029.

A. ADDITIONAL WORK Additional work is required by this revision for aircraft included in CONF 002 of the original issue of this Service Bulletin on which only the general visual inspection of the bleed gimbal records was done confirming that the bleed gimbal had not been replaced since the aircraft Entry Into Service (EIS).

NOTE: The additional work applies to every bleed gimbal which has not been yet inspected with a detailed inspection.

The MSNs impacted by additional work must accomplish the revision No. 01 of this Service Bulletin on the applicable side.

Unless otherwise stated by an Airworthiness Directive, AIRBUS recommends the additional work to be accomplished within one year after the Rev. 01 of this Service Bulletin.

B. REASON Revision No. 01 issued to:

- Inspect physically the gimbals to all MSNs in the applicability

- Correct the measure to environment elements in several illustration.

C. CHANGES

SUMMARY APPLICABILITY Operators updated.

PLANNING INFORMATION APPLICABILITY Applicability updated to remove MSNs 0270 and 0283.

Configuration definition All MSNs affected by this SB included in CONF 001 and associated data.

CONF 002 and associated data removed from SB.

COMPLIANCE Accomplishment Timescale Accomplishment timescale sentence updated due to the publication of an Airworthiness Directive (AD) by European Union Aviation Safety (EASA).

APPROVAL Sentence updated.

INDUSTRY SUPPORT INFORMATION Sentence updated.

ACCOMPLISHMENT INSTRUCTIONS T ask set A350-A-36-XX-P029-06000- 93BA-A Detailed Inspection of the Bleed Gimbals Sentence updated.

PROCEDURE T ask A350-A-36-XX-P029-03001-720A-A Depending on the Inspection Result, Install the Bleed Gimbal on the LH Wing and the Pylon Interface Fig.BC Sol.AA Installation of the Bleed Gimbal on Illustration updated to correct the flag notes of views A-A and B-B which were swapped.

A350

SERVICE BULLETIN

REVISION TRANSMITTAL SHEET REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 3 the LH Wing and the Pylon Interface T ask A350-A-36-XX-P029-04001-720A-A Depending on the Inspection Result, Install the Bleed Gimbal on the RH Wing and the Pylon Interface Fig.BD Sol.AA Installation of the Bleed Gimbal on the RH Wing and the Pylon Interface Illustration updated to correct the flag notes of views A-A and B-B which were swapped.

D. FILING INSTRUCTIONS This Service Bulletin has been generated electronically and is reissued as a complete document. Replace the complete document.

Put this Revision Transmittal Sheet in front of the Service Bulletin.

E. HISTORY OF PREVIOUS REVISIONS No previous revision F. REVISION SEQUENCE ORIGINAL: Apr 09/20 REVISION No. : 01 - Feb 03/22

A350

SERVICE BULLETIN

SUMMARY REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 4 ATA SYSTEM: 36 TITLE: PNEUMATIC - DISTRIBUTION - INSPECTION OF THE GIMBAL ABS0736

SUMMARY This summary is for information only and is not approved for modification of the aircraft.

A. MODIFICATIONS

MODIFICATION CLASSIFICATION MAJOR None MINOR None NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the mass, balance, structural strength, reliability, operational characteristics affecting the airworthiness of the product. All other changes are major changes.

B. REASON

(1) History This Service Bulletin is issued to answer to the quality assurance department has identified a welding quality issue on the gimbal joint Part Number (PN) ABS0736E9696S which affects the external convolutions and the internal ring assembly.

The inner ring of the gimbal is found oval shape instead of circular. This defect can generate an interference between both parts when submitted to angulation efforts.

The interference can generate a crack on the part and a subsequent hot bleed air leak on the pylon area.

This gimbal is installed in the bleed system ducting, at the pylon-wing interface area.

There are 2 gimbals per aircraft, one in the Left Hand (LH) pylon area and in the Right Hand (RH) pylon area.

(2) Objective/Action The aim of this Inspection Service Bulletin (ISB) is to inspect the affected components.

(3) Advantages Accomplishment of this ISB will identify the components with life limitation with further instructions to replace them.

(4) Operational/Maintenance Consequences None C. GENERAL EVALUATION

EVALUATION TABLE

COMPLIANCE MANDATORY COST SAVING NO

A/C OPERATION

AFFECTED

NO VENDOR SB NO

CANCELS INSPECTION SB NO ETOPS AFFECTED NO

PAX COMFORT AFFECTED NO POTENTIAL AD YES

RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO

LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO

A350

SERVICE BULLETIN

SUMMARY REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 5 NOTE: Service Bulletin must be accomplished.

D. MAINTENANCE CONFIGURATION

MAINTENANCE CONFIGURATION

FLAPS/SLATS EXTENDED YES E. MATERIAL PRICE INFORMATION

(1) Detailed Inspection of the Bleed Gimbals

(a) T ask set A350-A-36-XX-P029-06000-93BA-A Detailed Inspection of the Bleed Gimbals

MATERIAL PRICE INFORMATION TABLE

MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS Components See SB See Note Seals NOTE: Price information to be obtained from the given supplier.

F. APPLICABILITY This Service Bulletin is applicable to this (these) operator(s):

36V 87Z 96U A1L AAR AFR AZU BAW CAL CCA CES CHH CPA CRK CSC CSN DAL DLH ETD

ETH EVE FBU FIN FJI FWI HVN IBE JAL MAS MAU PAL QTR SIA THA VIR G. CONCURRENT REQUIREMENTS None H. NATURE OF THE WORK

(1) Detailed Inspection of the Bleed Gimbals

(a) T ask set A350-A-36-XX-P029-06000-93BA-A Detailed Inspection of the Bleed Gimbals

AIRCRAFT YES

EQUIPMENT NO I. MANPOWER

(1) Detailed Inspection of the Bleed Gimbals

(a) T ask set A350-A-36-XX-P029-06000-93BA-A Detailed Inspection of the Bleed Gimbals

MANPOWER TOTAL MAN-HOURS 16.50 h ELAPSED TIME (HOURS) 5.25 h

A350

SERVICE BULLETIN

SUMMARY Figure ICN-A350-A-36XXP029-A-FAPE3-05KM8-A-001-01 Fig.SA Sol.AA SHEET 1/2 REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 General Overview Page 6 J. GENERAL OVERVIEW

CONF ALL C 522AT LH 622AT 455DL LH 465DR RH

LH SHOWN

RH SYMMETRICAL

LH SHOWN

RH SYMMETRICAL RH Z465 Z622 Z455 Z522 LH RH LH RH

LH SHOWN

RH SYMMETRICAL A B B D C A A ICN-A350-A-36XXP029-A-FAPE3-05KM8-A-001-01

A350

SERVICE BULLETIN

SUMMARY Figure ICN-A350-A-36XXP029-A-FAPE3-05LL9-A-001-01 Fig.SA Sol.AA SHEET 2/2 REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 General Overview Page 7

CONF ALL

LH SHOWN

RH SYMMETRICAL

INBD CLOSING RIB

INSPECTION OF THE

BLEED GIMBAL

MANUFACTURING DATE OUTBD CLOSING RIB

FRONT SPAR D ICN-A350-A-36XXP029-A-FAPE3-05LL9-A-001-01

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 8 ATA SYSTEM: 36 TITLE: PNEUMATIC - DISTRIBUTION - INSPECTION OF THE GIMBAL ABS0736

1. PLANNING INFORMATION A. APPLICABILITY

(1) Models ON A/C 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215, 0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306, 0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342 350-1041 ON A/C 0021-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111- 0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162- 0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223, 0224, 0226-0228, 0230-0232, 0234-0240, 0243-0251, 0254-0257, 0259-0261, 0263-0265, 0267-0269, 0271-0273, 0276-0282, 0284, 0285, 0287, 0289, 0291-0295, 0297, 0299-0303, 0305, 0307-0314, 0316, 0318, 0320-0325, 0327-0329, 0331, 0333-0335, 0337-0339, 0341, 0343, 0347, 0351 350-941

CONF ALL

(2) Applicability by MSN 0021-0058 0060-0064 0066-0070 0072-0107 0109-0130 0132-0138 0140-0151 0153- 0155 0157-0165 0167-0170 0172-0193 0195-0221 0223-0241 0243-0252 0254-0269 0271-0274 0276-0282 0284-0287 0289-0303 0305-0316 0318-0343 0347 0351

(3) MSN by configuration

MSN CONFIGURATION 0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048 0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060 0061 0062 0063 0064 0066 0067 0068 0069 0070 0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084 0085 0086 0087 0088 0089 0090 0091 0092 0093 0094 0095 0096 0097 0098 0099 0100 0101 0102 0103 0104 0105 0106 0107 0109 0110 0111 0112 0113 0114 0115 0116 0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127 0128 0129 0130 0132 0133 0134 0135 0136 0137 0138 0140 0141 0142 0143 0144 0145 0146 0147 0148 0149 0150 0151 0153 0154 0155 0157 0158 0159 0160 0161 0162 0163 0164 0165 0167 0168 0169 0170 0172 0173 0174 0175 0176 0177 0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188 0189 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200 0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211 0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0223 0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234 0235 0236 0237 0238 0239 0240 0241 0243 0244 0245 0246 0247 0248 0249 0250 0251 0252 0254 0255 0256 0257 0258 0259 0260 0261 0262 0263 0264 0265 0266 0267 0268 0269 0271 0272 0273 0274 0276 0277 0278 0279 0280 0281 0282 0284 0285 0286 0287 0289 0290 0291 0292 0293 0294 0295 0296 0297 0298 0299 0300 0301 0302 0303 0305 0306 0307 0308 0309 0310 0311 0312 0313 0314 001

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 9

MSN CONFIGURATION 0315 0316 0318 0319 0320 0321 0322 0323 0324 0325 0326 0327 0328 0329 0330 0331 0332 0333 0334 0335 0336 0337 0338 0339 0340 0341 0342 0343 0347 0351

(4) Configuration definition Configuration 001 CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a standard configuration.

B. CONCURRENT REQUIREMENTS None C. REASON

(1) History This Service Bulletin is issued to answer to the quality assurance department has identified a welding quality issue on the gimbal joint Part Number (PN) ABS0736E9696S which affects the external convolutions and the internal ring assembly.

The inner ring of the gimbal is found oval shape instead of circular. This defect can generate an interference between both parts when submitted to angulation efforts.

The interference can generate a crack on the part and a subsequent hot bleed air leak on the pylon area.

This gimbal is installed in the bleed system ducting, at the pylon-wing interface area.

There are 2 gimbals per aircraft, one in the Left Hand (LH) pylon area and in the Right Hand (RH) pylon area.

(2) Objective/Action The aim of this Inspection Service Bulletin (ISB) is to inspect the affected components.

(3) Advantages Accomplishment of this ISB will identify the components with life limitation with further instructions to replace them.

(4) Operational/Maintenance Consequences None D. DESCRIPTION T o accomplish this Service Bulletin it is necessary to:

(1) Detailed Inspection of the Bleed Gimbals

(a) T ask set A350-A-36-XX-P029-06000-93BA-A Detailed Inspection of the Bleed Gimbals 1 Remove the Bleed Gimbal on the LH Wing and the Pylon Interface 2 Remove the Bleed Gimbal on the RH Wing and the Pylon Interface 3 Do a Detailed Inspection of the LH Bleed Gimbal Manufacturing Date 4 Do a Detailed Inspection of the RH Bleed Gimbal Manufacturing Date 5 Depending on the Inspection Result, Install the Bleed Gimbal on the LH Wing and the Pylon Interface

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 10 6 Depending on the Inspection Result, Install the Bleed Gimbal on the RH Wing and the Pylon Interface 7 Complete and Send the Inspection Report Sheet E. COMPLIANCE

(1) Classification MANDATORY: Service Bulletin must be accomplished.

(2) Accomplishment Timescale Accomplishment of this Service Bulletin must be done within the threshold given in the table below.

This Service Bulletin has been classified Mandatory by the issue of an Airworthiness Directive (AD) published by the European Union Aviation Safety Agency (EASA). The AD must be used as the reference document for the mandated accomplishment timescale.

T able 1, CONF 001– Detailed inspection of the LH bleed gimbal

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL All aircraft Do a detailed inspection of the LH bleed gimbal in accordance with Ref. T ask set A350-A-36-XX- P029-06ZZZ- 93BZ-A And Before 5600 Flight Cycles (FC) from the aircraft Entry Into Service (EIS) None None Remove the bleed gimbal on the LH wing and the pylon interface in accordance with Ref. T ask A350-A-36-XX- P029-03ZZZ- 520Z-A And Before next flight None None Do a detailed inspection of the LH bleed gimbal manufacturing date in accordance with Ref. T ask A350- A-36-XX-P029- 05ZZZ-300Z-A Before next flight None None If the bleed gimbal manufacturing date is prior to 51/16 Apply the applicable Service Bulletin in accordance with Ref. T ask A350-A-36-XX- Before next flight None None

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 11

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL P029-05ZZZ- 300Z-A And Complete and send the inspection report sheet in accordance with Ref. T ask A350- A-36-XX-P029- 06ZZZ-90AZ-A None None None If the bleed gimbal manufacturing date is not prior to 51/16 Install the bleed gimbal on the LH wing and the pylon interface in accordance with Ref. T ask A350-A-36-XX- P029-03ZZZ- 720Z-A And Before next flight None None Complete and send the inspection report sheet in accordance with Ref. T ask A350- A-36-XX-P029- 06ZZZ-90AZ-A None None None T able 2, CONF 001– Detailed inspection of the RH bleed gimbal

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL All aircraft Do a detailed inspection of the RH bleed gimbal in accordance with Ref. T ask set A350-A-36-XX- P029-06ZZZ- 93BZ-A And Before 5600 Flight Cycles (FC) from the aircraft Entry Into Service (EIS) None None Remove the bleed gimbal on the RH wing and the pylon interface in accordance with Ref. T ask A350-A-36-XX- P029-04ZZZ- 520Z-A And Before next flight None None

A350

SERVICE BULLETIN REV 00 Apr 09/20 A350-36-P029 REV 01 Feb 03/22 Page 12

COMPLIANCE TIME

CONDITIONS ACTION

THRESHOLD GRACE PERIOD

REPETITIVE

INTERVAL Do a detailed inspection of the RH bleed gimbal manufacturing date in accordance with Ref. T ask A350- A-36-XX-P029- 06ZZZ-300Z-A Before next flight None None If the bleed gimbal manufacturing date is prior to 51/16 Apply the applicable Service Bulletin in accordance with Ref. T ask A350-A-36-XX- P029-06ZZZ- 300Z-A And Before next flight None None Complete and send the inspection report sheet in accordance with Ref. T ask A350- A-36-XX-P029- 06ZZZ-90AZ-A None None None If the bleed gimbal manufacturing date is not prior to 51/16 Install the bleed gimbal on the RH wing and the pylon interface in accordance with Ref. T ask A350-A-36-XX- P029-04ZZZ- 720Z-A And Before next flight None None Complete and send the inspection report sheet in accordance with Ref. T ask A350- A-36-XX-P029- 06ZZZ-90AZ-A None None None F. APPROVAL The technical content of this document is approved under the authority of the Design Organisation Approval ref. EASA.21J.031.

If an aircraft listed in the applicability has a modification or repair embodied that is not of AIRBUS origin, and which affects the content of this Service Bulletin, the operator is responsible for obtaining approval by its airworthiness authority for any adaptation necessary before incorporation of the Service Bulletin.