On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 4OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0858; AD 2012-25-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5cb1c24498008bd3b305f264fb5f011344370fecc47b565b119165a0327b9926' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '5cb1c24498008bd3b305f264fb5f011344370fecc47b565b119165a0327b9926' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
ALL OPERATOR TELEX - ALL OPERATOR TELEX SUBJECT: ATA57 - WINGS - CENTER WINGS - INSPECTION FOR CRACK IN FR40 FWD FITTING BETWEEN STRG 32 AND 33 OUR REF.: AOT A300-57A6111 dated 09 Aug 2011,
1. AIRCRAFT AFFECTED This AOT is only applicable to A300B4-601, A300B4-603, A300B4-605R, numbers, it modified preventively service without pratiminaly crack finding) in accordance with SB Ref.2 (Airbus Modification 10453S20571), at any revision.
Note: Aircraft having incorporated SB Ref. 2 (Airbus Modification 10453S20571) at any revision, as applicable to the aircraft model, corrective action (repair following crack finding) are not concerned by the requirements of this AOT.
2. REFERENCED DOCUMENTATION Ref.1: SB 57-6052 Revision 03 - dated 27 May 2002 Ref.2: SB 57-6053 Revision 03 - dated 28 May 2002 Ref. 3: SB 57A6108 Revision 00 - dated 12 September 2008 Ref. 4: SB 53-0268 Revision 06 - dated 07 January 2002 Ref. 5: SB 53-0297 Revision 02 - dated 31 October 1995 Ref. 6: SB 53A0387 Revision 00 - dated 12 September 2008 Ref.7: OIT 999.0075/08 rev.1 - dated 09 September 2008
3. REASON
3.1 BACKGROUND (inspected through ISB Ref.1). However, the subject aircraft had previously been modified by SB Ref.2, which cancels the ISB Ref.1 requirements.
Therefore and pending completion of the full analysis using a refined SB Ref. 2 and Ref.5 fieets was launched in order to ensure the structural a one-time Detailed Inspection (DET) of the post- Alert St's Ref. 3 for 4300-600 and Ref. 6 for A300 were issued accordingly.
operators reported crack finding further to completion of these Alert B's Ref. 3 and Ref.6. This allowed completion of the analysis before an additional short-term inspection.
3.2 NEW FINDINGS uring recent maintenance checks, two aircraft (one А300B4 and one A300-
500) were found cracked at FR40 forward fitting.
These new crack findings are considered as unexpected since:
They were found after application of modification SB Ref. 2 and Ref.5 which cancels the inspections in the area of study They were found after accomplishment of the one-time DET in accordance with Alert SB Ref.3 and Alert SB Ref.6.
Those new findings require additional short-term inspections.
3.3 AIM The purpose of this AOT is to call for a repetitive DET of the FR40 forward fitting (without nut removal) up to the accomplishment of a onetime Eddy Current or liquid penetrant inspection of this area (with nut removal).
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE The repetitive DET described in paragraph 4.2.2.1 must be performed:
within 300 FC from the receipt date of this AOT Then, repeated at intervals not exceeding 300 FC Up to accomplishment of a one-time Non Destructive Testing (NDT) inspection, that must be performed within 36 months from the receipt date of this AOT.
Details of this NDT inspection are given in paragraph 4.2.2.2.
Accomplishment of this one-time NDT inspection cancels the repetitive DET requirements described in paragraph 4.2.2.1.
If this one-time NDT inspection is performed within 300 FC from the receipt date of this AOT, no DET is required before or simultaneously.
4.1.2 MANPOWER The manpower estimates given in this AOT are based on the direct labor cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator's circumstances. The estimates do not include the time to preptools, drying times for paints, sealants, etc., and general administration work are also not included. plan or inspect the work. Manufacture and procurement of parts The total man-hours (MH) and elapsed time (ET) required to perform the repetitive DET are the same as the ones specified in SB Ref. 3 paragraph The total MH and ET required to perform the one-time NDT inspection are the same as the ones specified in SB Ref.1 paragraph 1.E.
4.2 DESCRIPTION
4.2.1 JOB PREPARATION AND ACCESS For the repetitive DET, refer to SB Ref.3 paragraph 3.B.
For the one-time NDT inspection, refer to SB Ref.1 paragraph 2.A. (1).
Note:
To perform the above mentioned NDT inspection, it is not required to remove the vapor-seal.
4.2.2 INSPECTION INSTRUCTIONS
4.2.2.1 Repetitive DET Refer to SB Ref. 3 paragraph 3.C. This inspection is to be done without nut removal.
4.2.2.2 NDT inspection Refer to SB Ref.1 paragraph 2.B. part "WITH NUT REMOVAL", with method of Eddy Current (refer to NTM 57-10-48, Part 6) or liquid penetrant (refer to NTM 57-10-48, Part 9).
Caution:
After the NDT inspection, a new nut post-mod SB Ref.2 shall be installed (Nut part number: NAS1726-8E or alternatives as per A300-600 SRM 51-40-
4.2.3 JOB CLOSE UP For the repetitive DET, refer to SB Ref.3 paragraph 3.E.
For the one-time NDT inspection, refer to SB Ref.1 paragraph 2.D. and
2.E.
4.2.4 ACTIONS IN CASE OF FINDINGS In case of findings during either the repetitive DET or the NDT inspection, before next flight, please contact Airbus to get further instructions:
SEER1/SEER2/SEER3 Customer Services Fax: +33 (0)5 61 93 28 73 Mailto:
regionl.StructureRepairSupport@airbus.com region2.StructureRepairSupport@airbus.com region3.StructureRepairSupport@airbus.com Or for AOG request AIRTAC (Airbus Technical AOG Center) Customer Services Phone: +33 (0) 5 61 93 34 00 Fax: +33 (0)5 61 93 35 00 Mailto: airtac@airbus.com
4.2.5 TOOLING 48, part 6 10-48, Part 9 Inspection equipment for liquid penetrant inspection as per NTM 57- Inspection equipment for Eddy Current inspection as per NTM 57-10-
5. AOT APPROVAL The technical content of this AOT has been approved under the authority of EASA Design Organization Approval number EASA 21J.031.
It is anticipated that this AOT will be rendered mandatory.
6. REPORTING/ACKNOWLEDGEMENT Operators are requested to acknowledge receipt of this AOT within 48 hours after receipt to:
Cecile BORDES, SEES E-mail: cecile.bordes@airbus.com Fax number: +33+ (0) 5 61 93 Questions about this AOT and inspection results with or without findings are to be sent to Airbus Customer Services engineering as soon as Page 3
possible, after the AOT accomplishment, to the attention of:
Mr Sebastien FAURE, 93 31 68 SEES1 Phone: +33 (0) 5 61 Fax number +33 (0)5 61 93 36 14 E-mail: sebastien.s.faure@airbus.com Best Regards, P. BOUCHERAT VICE PRESIDENT A300/A310/A300-600 PROGRAMME
CUSTOMER SERVICES DIRECTORATE It you do not need to receive AOT any more organization need to be added to the distribution, please advise your or if other people in your Airbus Customer Services contact accordingly.
For SITA or FAX users: You can have access to the complete version of this document, including the attachments, by opening it in AirNav engineering from Airbusworld. The document is available in AirN@v withir 48 hours after dispatch. You may also contact the responsible Airbus engineer in order to have the full content by email or fax.