On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Text · 9Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-2268, the docket of AD 2025-17-17. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6c9a5e3fbdc558d344b9c6351b45dbf05a6f4ed44a9ecc4123bc8111eea5fcaa' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '6c9a5e3fbdc558d344b9c6351b45dbf05a6f4ed44a9ecc4123bc8111eea5fcaa' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Airbus Amber
CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 1 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 32 – MLG AFT Pintle Pin - Nickel Plating missing AIRCRAFT TYPE: A319, A320, A321 OUR REF.: A32N036-25 Rev 00 dated 23-JUL-2025 EFFECTIVITY DATE: 02 August 2025 Export Control: Not Technical
1. AIRCRAFT AFFECTED A/C type Model MSN A319 A319-114 00738 A319 A319-112 02652 A320 A320-214 03087 A320 A320-232 05892 A320 A320-232 06030 A320 A320-214 06225 A320 A320-232 06254 A320 A320-232 06374 A320 A320-214 06741 A320 A320-214 06777 A321 A321-271NX 12330 A321 A321-251NX 12343 A321 A321-251NX 12355 A321 A321-252NX 12388 A321 A321-271NX 12417
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix 1: LIST OF AFFECTED MLG AFT PINTLE PIN SERIAL NUMBERS Appendix 2: ALTERNATE PROCEDURE “AFT PINTLE PIN REMOVAL/INSTALLATION WITHOUT COMPLETELY REMOVING THE MLG” Appendix 3: INSPECTION REPORTING SHEET
2.2 REFERENCES Reference 1: AMM Task 32-11-11-000-001-A - Removal of the MLG Leg Assembly and Subtask 32-11-11-020-050-X - Removal of the Pintle Pins
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 2 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Reference 2: AMM Task 32-11-11-400-001-A - Installation of the MLG Leg Assembly and Subtask 32-11-11-420-061-X- Installation of the Pintle Pins Reference 3: CMM 32-11-07 – Item 20 - PIN - PINTLE REAR MLG Reference 4: IPC Fig. 32-11-85-01A - MLG INSTL Reference 5: RIL Ref. SA32M25001399 latest revision (associated to ISI 32.00.00205).
3. REASON The purpose of this Alert Operators Transmission (AOT) is to inform A320 Family operators of a batch of Main Landing Gear (MLG) AFT Pintle Pin Part Numbers (P/N) D3215600500600 and D3215303000800 (reference 3 and 4) identified as not having Nickel Plating applied to inner bore of AFT Pintle Pin during manufacturing.
It requests A320 Family operators to replace affected MLG AFT Pintle Pin Serial Numbers (S/N) listed in appendix 1.
3.1 FACTS AND BACKGROUND A Batch of Pintle Pins P/N D3215600500600 and D3215303000800 has been identified as not having Nickel Plating applied to inner bore of AFT Pintle Pin, leading to bare base metal with no corrosion protection.
3.2 INVESTIGATION AND ROOT CAUSE A quality investigation has been launched to determine the root cause of this deviation during the manufacturing process.
The majority of the MLG AFT Pintle Pins of this defective batch have been quarantined and blocked before installation on any Aircraft.
Nevertheless, the investigation has identified that 18 affected parts have been installed on in-service Aircraft:
- 7 affected parts installed on 5 Aircraft in Final Assembly Line (FAL)
- 11 affected parts, delivered by SATAIR as spare, installed on 10 in-service Aircraft during maintenance activities post-delivery.
All Aircraft MSNs having an affected Pintle Pin Serial Number installed have been identified, refer to Appendix 1.
Corrective actions have been put in place with the manufacturer to prevent any further re-occurrence.
3.3 CONSEQUENCES Absence of surface protection (Nickel Plating) to the inner bore of AFT Pintle Pin could lead to corrosion development and potential cracks initiation.
4. OBJECTIVES OF THIS AOT The objective of this AOT is to request Operators of aircraft listed in paragraph 1. to replace affected MLG AFT Pintle Pins listed in appendix 1.
5. MAINTENANCE PROCEDURE
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 3 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in other sections of the AOT. When the words “refer to” are used and the operator has a procedure or tool accepted by the local authority he belongs to, the accepted alternative procedure or tool can be used.
When the words “in accordance with” are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the AOT is met within the set parameters.
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The paragraphs 5.1 ACCOMPLISHMENT TIMESCALE, 5.4 INSPECTION and 5.5 INSTRUCTIONS are Required for Compliance (RC) and must be done to comply with the AD. To allow more flexibility, the rule "refer to" and "in accordance with" will apply to these paragraphs 5.1, 5.4 and 5.5.
Other paragraphs are recommended and may be deviated from, done as part of other actions or done with accepted methods different from those given in the AOT, as long as the RC paragraphs can be done and the aircraft can be put back into a serviceable condition.
5.1 ACCOMPLISHMENT TIMESCALE (RC) Within 12 Months since the date of installation of affected part on Aircraft, or within 1 Month from the effective date of this AOT, whichever occurs later, replace the affected MLG AFT Pintle Pin S/Ns listed in appendix 1, in accordance with paragraph 5.5 INSTRUCTIONS.
5.2 MANPOWER The estimated time to perform the replacement of the affected MLG AFT Pintle Pin S/Ns listed in appendix 1, in accordance with Alternative procedure of appendix 2. is between 25-35 Man hours depending on equipment/skills.
5.3 ACCESS AND CLOSE-UP WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND RELATED DOORS
- THE CARGO DOORS
- OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING:
OBEY THE HYDRAULIC SAFETY PROCEDURES.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
WARNING:
BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND CAN CAUSE INJURY AND/OR DAMAGE.
For ACCESS and CLOSE-UP, refer to the applicable AMM tasks:
- Reference 1 AMM Task 32-11-11-000-001-A "Removal of the MLG Leg Assembly" Including the Subtask 32-11-11-020-050-X "Removal of the Pintle Pins".
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 4 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
- Reference 2. AMM Task 32-11-11-400-001-A - Installation of the MLG Leg Assembly Including the Subtask 32-11-11-420-061-X- Installation of the Pintle Pins.
Note: (“X” depending of Effectivity applicable per MSN)
5.4 INSPECTION Not applicable.
5.5 INSTRUCTIONS (RC) Replace affected MLG AFT Pintle Pin S/Ns listed in Appendix 1.
Refer to one of the following procedures:
1. Replace affected MLG AFT Pintle Pins. Refer to the following AMM tasks procedures:
- Reference 1 AMM Task 32-11-11-000-001-A "Removal of the MLG Leg Assembly" Including the Subtask 32-11-11-020-050-X "Removal of the Pintle Pins".
- Reference 2. AMM Task 32-11-11-400-001-A - Installation of the MLG Leg Assembly Including the Subtask 32-11-11-420-061-X- Installation of the Pintle Pins.
Note: (“X” depending of Effectivity applicable per MSN) Or
2. Replace affected MLG AFT Pintle Pins in accordance with the Alternate procedure in appendix 2.:
NOTE: Alternate procedure in appendix 2. provides a simplified procedure for the removal/installation of the MLG Aft Pintle Pin without complete removal and installation of the MLG.
5.6 SPARES AND TOOLING Airbus launches a monitored retrofit campaign to support the replacement of affected MLG Aft Pintle Pin S/Ns of appendix 1.
Please refer to the Reference 5. Retrofit Information Letter (RIL) SA32M25001399 at Revision R00 or any later revision if applicable for further details on the industry support conditions and retrofit organization.
6. ADDITIONAL INFORMATION
6.1 FOLLOW-UP PLAN It is anticipated that an Airworthiness Directive will be issued by EASA to mandate the content of this AOT.
6.2 IMPACTED DOCUMENTATION This AOT has no impact on the published documentation.
7. AOT APPROVAL The technical content of this document is approved under the authority of the DOA ref. EASA.21J.031.
8. REPORTING
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 5 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Complete the Inspection Reporting sheet in Appendix 3, and address your acknowledgment and reporting sheet to Airbus Customer Services through the In-Service Alerts and Information Cockpit tile on AirbusWorld by using the referenced AOT page.
For retrofit purpose, please provide your reporting sheet to Airbus Retrofit Services through the e-mail address monitored.retrofit@airbus.com For any technical query, you can address your questions about this AOT to Airbus Customer Services through TechRequest on AirbusWorld, selecting Engineering Domain and ATA 32-11 / Topic AOT A32N036-25.
For any question related to retrofit aspect, you can address your questions about this AOT to monitored.retrofit@airbus.com Best Regards, Ahmed CHABBOUH Senior Director In-Service Engineering Customer Care Center Caroline CLAVEL Vice President A320 Programme Customer Services
Airbus Amber AIRBUS
ALERT OPERATORS TRANSMISSION - AOT APPENDIX 1 - LIST OF AFFECTED MLG AFT PINTLE PIN
SERIAL NUMBERS MLG AFT Pintle PIN AFT Pintle PIN AFT Pintle PIN MSN ASSY Part Number Part Number S/N Affected D3215303200800 D3215303000800 AF20233 738 D3215303200800 D3215303000800 AF20239 2652 D3215303200800 D3215303000800 AF19806 3087 D3215303200800 D3215303000800 AF19801 5892 D3215303200800 D3215303000800 AF19809 6030 D3215303200800 D3215303000800 AF19808 6225 D3215303200800 D3215303000800 AF19803 6254 D3215303200800 D3215303000800 AF19451 6374 D3215303200800 D3215303000800 AF19456 6374 D3215303200800 D3215303000800 AF19458 6741 D3215303200800 D3215303000800 AF19452 6777 D3215600400600 D3215600500600 AF8786 12330 D3215600400600 D3215600500600 AF8794 12343 D3215600400600 D3215600500600 AF8788 12343 D3215600400600 D3215600500600 AF8791 12355 D3215600400600 D3215600500600 AF8789 12388 D3215600400600 D3215600500600 AF8783 12417 D3215600400600 D3215600500600 AF8792 12417 AOT ref: A32N036-25 Rev 00 Page 6 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_V10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 7 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 2 - ALTERNATE PROCEDURE “AFT PINTLE PIN REMOVAL/INSTALLATION WITHOUT COMPLETELY REMOVING THE MLG” WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND RELATED DOORS
- THE CARGO DOORS
- OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING:
OBEY THE HYDRAULIC SAFETY PROCEDURES.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
WARNING:
BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND CAN CAUSE INJURY AND/OR DAMAGE.
Procedure:
AT ALL STAGES ENSURE THAT ALL WARNINGS AND CAUTIONS FROM THE AMM TASKS LISTED IN THE PROCEDURE ARE ADHERED TO.
MLG AFT PINTLE Pin Removal Procedure:
1) Remove the MLG (FIN 2501GM and 2502GM) in accordance with Reference 1. AMM TASK 32-11-11-000-001-A “Removal of the MLG Leg Assembly”, up to and including SUBTASK 32- 11-11-020-050- X (“X” depending of Effectivity applicable per MSN) E. Removal of the Pintle Pins, Step (4), which removes the Aft Pintle Pin.
NOTE At this point, the EQUIPMENT MLG, REMOVAL INSTALLATION (98D32104002002) or the EQUIPMENT-MLG, REMOVAL INSTALLATION (98D32104002003) will be supporting part of the weight of the leg assembly (as the Forward Pintle is still installed).
NOTE Once the aft pin is removed, any changes in aircraft configuration, including people working on the aircraft, could alter the relative position of the MLG compared to the Aircraft structure. Keep the Aircraft configuration stable during this time to minimize the risk of misalignment.
NOTE Temperature fluctuations could also contribute to a misalignment, and so it is recommended to perform the reinstallation of the new Aft Pintle Pin as soon as possible after removal.
CAUTION
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 8 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Misalignment of the MLG and the structure could cause damage to the Aft Pintle, the Forward Pintle Pin or the structure during installation of the new Aft Pintle Pin.
MLG AFT PINTLE Pin Installation Procedure:
2) Make sure the new Aft Pintle Pin to be installed is clean and in the correct condition for installation in accordance with AMM TASK 57-51-00-200-001 “Detailed Visual Inspection of Outer-Wing Main-Landing-Gear Rear-Pintle-Pin”
3) Perform all inspections as per SUBTASK 32-11-11-420-063-X (“X” depending of Effectivity applicable per MSN) paragraph “A. Preparation for Installation”, refer to the dedicated inspection steps:
- For the step associated with the spherical bearing of the MLG rear pintle pin and
- For the step associated with the MLG support rib 5 Only perform the checks that are possible with the MLG still in place, looking for signs of corrosion, damage, deformation, cracked sealant, and correct condition of surface protection before continuing with the installation task.
NOTE Completion of inspections during this procedure cannot be used to replace any inspections that are required per MPD tasks for these components.
4) Check the Job Set Up Procedures and Maintenance Configuration (including circuit breakers and Flight configuration precautions) are correct for performing the installation as per AMM TASK 32-11-11-400-001-A “Installation of the MLG Leg Assembly”.
5) Perform the Installation of the MLG In accordance with Reference 2. AMM TASK 32-11-11-400- 001-A “Installation of the MLG Leg Assembly”, beginning at SUBTASK 32-11-11-420-061- X (“X” depending of Effectivity applicable per MSN) paragraph “D. Installation of the Pintle Pins” step (3) to set the tool to install the Aft Pintle Pin.
CAUTION Misalignment of the MLG and the structure could cause damage to the Aft Pintle Pin, the Forward Pintle Pin or the structure during installation of the new Aft Pintle Pin.
NOTE If during installation of the New Aft Pintle Pin abnormal resistance is felt, the operator must stop and re-establish the correct alignment of the MLG Pintle Axis with the airframe in accordance with the AMM TASK 32-11-11-400-001-A. DO NOT FORCE THE PIN.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A32N036-25 Rev 00 Page 9 of 9 Date: 23-JUL-2025 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 3 - INSPECTION REPORTING SHEET PN: Part Number.
SN: Serial Number.
CSN: Cycle Since New.