Other document · Airbus

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

No revision namedU.S. DOT/FAA - A330 AOT A34N001-12 · 9 pages · 1.7 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-1315; AD 2012-26-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2012-1315 (document 0002) · AD 2012-26-15

No revision namedU.S. DOT/FAA - AOT A34N001-12 · 11 pages · 2.2 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-1315; AD 2012-26-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2012-1315 (document 0002) · AD 2012-26-15

Manufacturer
Airbus
Type
All Operators Transmission
Number
A34N001-12

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 9OCR

No revision named, the newest copy. This text is OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-1315; AD 2012-26-15 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '1936ea7e36075564e519fc7b105481bea9473bee58a59be30525c40b2c278db0'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

ALERT OPERATORS TRANSMISSION - ALERT OPERATORS TRANSMISSION

AIRBUS CUSTOMER SERVICES SUBJECT: ATA 34 - Premature pressure measurement drift of Honeywell Air Data Modules (ADM) P/N PG1152BC02 OUR REF.: A34N001-12 dated 15 Nov 2012.

1. AIRCRAFT AFFECTED A330 A/C listed in Appendix A.

2. REFERENCED DOCUMENTATION AMM 34-11-17 PB 401 CONF 00 - ADM (AIR DATA MODULE) - REMOVAL/INSTALLATION AMM 31-36-00-740-805-A Access to the Parameter call-up menus Honeywell Inspection Service Bulletin reference D201210000088 AMM 34-13-00-720-802-A - Functional Test of the ADM Accuracy

3. REASON batch of Honeywell Air Data Modules P/N PG1152BC02 (FIN 19FP1, 19FP2, 19FP3, 19FP4, 19FP5, 19FP6, 19FP7 and 19FP8) are affected by premature pressure measurement drift.

An Equipment Airworthiness Directive will be released by the FAA to mandate application of Honeywell Inspection Service Bulletin reference D201210000088.

This AOT provides a mean to comply with Honeywell Inspection Service Bulletin reference D201210000088.

3.1 FACTS ADMs are pressure transducers which are connected to the static and Pitot probes.

They convert pneumatic pressures (static pressure and total pressure) to ARINC 429 signals which are sent to the ADIRU for air data parameters computation.

ADMs utilize a sensor tube assembly where a small leak affecting the reference vacuum pressure has been discovered on some units.

Honeywell has identified a batch of 163 ADMs that may suffer from this issue.

Amongst this batch, it is expected that 5 to 10% suffer from a leak.

3.2 CONSEQUENCES Although no report linked to this issue has been received from the field, loss of ADM accuracy over time would lead to increasingly erroneous altitude, CAS, TAS, and/or Mach readings from the affected ADR.

3.3 AIM The aim of this AOT is to recommend an inspection of affected ADMs.

FM1104649v2 1

Page 2OCROpen in PDF

4. SHORT TERM ACTION For affected ADMs in the ADR1 or ADR2 system (FINs 19FP1, 19FP2, 19FP4, 19FP5, 19FP6 and 19FP7) operators are asked to read the ADM pressure outputs at the MCDU (label call up) and to compare them to Integrated Standby Instrument System (ISIS) pressure output (read also at the MCDU by label call up). Depending on the outcome of this check a further check at a later date or immediate replacement of the ADM is required.

ADMs in the ADR3 system (19FP3 and 19FP8) cannot be read through a label call up.

Therefore ADMs fitted in these positions should either be moved to another FIN position that is testable or replaced.

4.1 PLANNING AND MANPOWER

4.1.1 ACCOMPLISHMENT TIMESCALE The first check should be performed within the timescale mentioned in FAA AD ref TBD.

4.1.2 MANPOWER The estimated time to perform the inspection requested in this AOT is 0.5 MH.

The estimated time to perform an ADM replacement is 1-2 MH (depending on location of the ADM) .

4.2 DESCRIPTION

4.2.1 ACCESS No specific access is required for the inspection of 19FP1, 19FP2, 19FP4, 19FP5, 19FP6 and 19FP7 (only MCDU readings).

For 19FP3 and 19FP8, an ACCESS PLATFORM 3M (10 FT) - ADJUSTABLE is needed to access door 821 in order to perform ADM installation / removal (refer to AMM 34- 11-17 PB 401 CONF 00 - ADM (AIR DATA MODULE) - REMOVAL/INSTALLATION) .

4.2.2 PROCEDURE Step 1: identify A/C affected by suspicious ADMs fitted in positions 19FP1, 19FP2, 19FP4, 19FP5, 19FP6 and/or 19FP7 referring to Appendix A. If affected ADMs have been moved to different aircraft since leaving Airbus, please inspect those aircraft according to the present procedure.

- Step 2: for aircrafts identified in step 1, perform the procedure according to Appendix B.

- Step 3: identify A/C affected by suspicious ADMs fitted in positions 19FP3 and 19FP8 referring to Appendix A.

- Step 4: for A/C identified in step 3, those ADMS (in position 19FP3 and 19FP8) cannot be read through the procedure described in Appendix B. Therefore ADMs fitted in these positions should either be moved to another FIN position that is testable or replaced within timescale mentioned section 4.1.1.

FM1104649v2 2

Page 3OCROpen in PDF

The procedure covered in Appendix B is an acceptable means of complying with the action requested in Honeywell Inspection Service Bulletin reference D201210000088 Note that if an ADM identified in Appendix A has been removed from A/C and is now stored as a spare unit, it shall be sent back to HWL.

4.2.3 FINDINGS Depending on the outcome of the procedure in Appendix B either immediate ADM replacement (per below AMM procedure) or recheck at a later date (per AOT Appendix B procedure) will be required. Please note that procedure thresholds and intervals have been defined to ensure compliance to RVSM requirements. At any stage, removal of affected ADMs and replacement by serviceable ones will remove the need to perform the check procedure described in this AOT.

For ADM replacement please refer to AMM 34-11-17 PB 401 CONF 00 - ADM (AIR DATA

MODULE) - REMOVAL/INSTALLATION If immediate ADM replacement is not possible, the aircraft may be dispatched under MMEL 34-10-01.

4.3 ALTERNATIVE PROCEDURE Instead of performing the procedure described in Appendix B, the operator may perform AMM 34-13-00-720-802-A - Functional Test of the ADM Accuracy, on aircraft equipped with affected ADM SNs.

The check must be re-performed repetitively with an interval of 30 days as long as any affected ADMs remain on the aircraft.

This alternative procedure is an acceptable means of complying with the action wetage in Honeywell Inspection Seepice lun requested in Honeywell Inspection Service Bulletin reference D201210000088 section B, paragraph 4(c).

4.4 SPARES AND TOOLING Information on obtaining replacement ADMs is available in Honeywell Inspection Service Bulletin reference D201210000088.

Honeywell customer support may also be contacted at:

Telephone: 800-601-3099 (Toll Free U.S.A./Canada) Telephone: 602-365-3099 (International Direct) Telephone: 00-800-601-30999 (EMEA Toll Free) Telephone: 420-234-625-500 (EMEA Direct)

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN Depending on the results of this inspection campaign Airbus will provide:

The closing procedure for the repetitive check that is put in place by this AOT .

- Possible other actions that may be required.

FM1104649v2 3

Page 4OCROpen in PDF

6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr.

EASA.21J.031.

7. REPORTING Following each aircraft check please return to engineering.support@airbus.com either:

- A copy of the reporting sheet contained in Appendix B2

- The results of AMM 34-13-00-720-802-A - Functional Test of the ADM Accuracy including MSN on which the check was performed and the ADM SNs which were This reporting is requested by FAA and will be used to determine most appropriate actions to be put in place in frame of our follow up plan.

Questions about this AOT and inspection results with or without findings are to be sent to Airbus Customer Services engineering as soon as possible, after the AOT application, to the attention of:

Benoit DUQUESNE Navigation Systems Engineer Avionics - SEEA3

CUSTOMER SERVICES Phone: +33 (0)5 82 05 08 57 Mailto: benoit.b.duquesne@airbus.com Best Regards, Jean-Luc MOUYSSET X XXXX

VICE PRESIDENT ENGINEERING SUPPORT VICE PRESIDENT XXX PROGRAMME

CUSTOMER SERVICES CUSTOMER SERVICES FM1104649v2 4

Page 5OCROpen in PDF

A34N001-12 APPENDIX A: LIST OF AFFECTED AIR DATA MODULE (ADM) SERIAL NUMBERS FITTED ON А330 FAMILY AIRCRAFT The ADM S/N can be read on the "identification plate" installed on the ADM itself (item 10 of the figure below).

10 ADM SN Program - FIN MSN Operator 1201W829 LR 19FP2 1327 AZA 1201W626 LR 19FP2 1326 AAR 1201W594 LR 19FP5 1323 AFL 1201W639 LR 19FP6 1323 AFL 1111V887 LR 19FP1 1321 XAX 1201W568 LR 19FP7 1321 XAX 1202W893 LR 19FP7 1319 VOZ 1202W894 LR 19FP2 1319 VOZ 1202W935 LR 19FP3 1319 VOZ 1202W881 LR 19FP6 1318 MAS 1112W087 LR 19FP6 1313 AZA 1201W634 LR 19FP8 1313 AZA 1201W636 LR 19FP5 1313 AZA 1112W392 LR 19FP7 1311 THY 1201W470 LR 19FP1 1311 THY 1112W338 LR 19FP7 1310 HAL 1201W434 LR 19FP6 1310 HAL 1112W307 LR 19FP4 1307 THY 1112W103 LR 19FP2 1306 VOZ 1112W097 LR 19FP2 1304 CCA 1112W098 LR 19FP1 1304 CCA 1112W169 LR 19FP5 1304 1

Page 6OCROpen in PDF

A34N001-12 1112W186 1112W185 LR 19FP3 1301 AFL 1112W187

Page 7OCROpen in PDF

A34N001-12 APPENDIX B: AIR DATA MODULE CHECK PROCEDURE AND REPORTING TABLE This procedure enables the operator to obtain raw pressure values from the Air Data Modules (ADMs) and compare them to the raw pressure value provided by the Integrated Standby the discrepancy between the ADM and the ISIS, either retest at a later date or immediate replacement of affected ADMs are required.

As ADMs in position 19FP3 and 19FP8 cannot be read through a label call up this procedure is not applicable to them. ADMs fitted in positions 19FP3 or should either be moved to another FIN position that is testable or The procedure is divided into two steps. First the necessary data is accessed via the MCDU. Second the reporting sheet is filled and the follow up actions determined.

B1: CALL UP PRESSURE VALUES FROM AFFECTED ADMS AND ISIS Pre-requisite:

Make sure the A/C is not exposed to wind conditions (wind < 5kts).

Otherwise, the inspection shall be carried out with the aircraft placed in a hangar.

- Make sure air data probes protection covers are not installed Access the Parameter Call-Up Menus in the MCDU per AMM 31-36-00-740-805-A.

following label call up references to access raw pressure data values from ISIS and the affected ADMs only (refer to affected ADM serial number list in Appendix A).

ISIS static pressure: F68/1/245/00/16 ADM 19FP1: 006/1/242/01/16 ADM 19FP2: 006/2/242/10/16 ADM 19FP4: 006/1/177/01/16 ADM 19FP5: 006/1/176/01/16 ADM 19FP6: 006/2/177/10/16 ADM 19FP7: 006/2/176/10/16 NOTE: The values obtained from the label call up are raw data - item 1 of the figure 1 below.

ACMS : LABEL CALL -UP 1/8

EQ L AB SD I DATABITS 1006 S SM

AB SD DATABITS 10 32394 S SM DATABITS 28-11 0010 1011 RETURN PRINT * Figure 1: MCDU screenshot

Page 8OCROpen in PDF

A34N001-12 B2: REPORTING SHEET AND DETERMINATION OF ACTIONS TO BE PERFORMED Each time a test is performed for a given aircraft please fill this reporting sheet and return it to Airbus at engineering.support@airbus.com Aircraft MSN tested Data value from ISIS label call up F68/1/245/00/16 (P_ISIS) Date and time of check Make sure wind speed is less than 5 kts Make sure air data probes protection covers are not installed Affected ADM Data value IP_ISIS - P_ADMI Per below table, next action ADM installation from ADM (minus) to be performed?

Serial position label call (Replacement or retest in 30 Number (FIN) up (P_ADM) or 120 days) Report action accomplished in Depending on magnitude of this column P_ISIS - P_ADM perform the action requested IP_ISIS - P_ADMI Action Time to complete action (minus) > 22 Remove Immediate 16 to 22 Retest Less than 30 days < 16 Retest Less than 120 days NOTE: If immediate ADM replacement is not possible, the aircraft may be dispatched under MMEL 34-10-01.

Page 9OCROpen in PDF

A34N001-12 B3: EXAMPLE REPORTING SHEET This example is provided to help operators understand how the sheet should be filled Aircraft MSN tested 9999 Data value from ISIS label call up 32422 F68/1/245/00/16 (P_ISIS) Date and time of check 10/OCT/2012 Make sure wind speed is less than 5 OK kts Make sure air data probes OK protection covers are not installed Affected ADM Data value IP_ISIS - P_ADMI Per below table, next action ADM installation from ADM (minus) to be performed?

Serial position label call (Replacement or retest in 30 Number (FIN) up (P_ADM) or 120 days) SN 30 19FP5 32419 Retest within 120 days SN 79 19FP7 32394 28 Immediate replacement Report action accomplished in Depending on magnitude of this column P_ISIS - P_ADM perform the action requested IP_ISIS - P_ADMI Action Time to complete action (minus) > 22 Remove Immediate 16 to 22 Retest Less than 30 days < 16 Retest Less than 120 days 3