Other document · Airbus

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

AOT A53L012-16 R00AOT A53L012-16 R00 · 45 pages · 4.0 MB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9517; AD 2017-16-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2016-9517 (document 0006) · AD 2017-16-07

Appendix 5Appendix 5 · 3 pages · 234 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9517; AD 2017-16-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2016-9517 (document 0006) · AD 2017-16-07

Manufacturer
Airbus
Type
Alert Operators Transmission
Number
A53L012-16
Latest revision known
A53L012-16, Revision 01, dated March 9, 2017

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 2

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 2 proposed ADs.

Text · 45Partly OCR

AOT A53L012-16 R00, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9517; AD 2017-16-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '73159f5727a527401b75378d4d717f2949b21912e644342507fc1196c73d29b9'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CUSTOMER SERVICES DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE TELEPHONE + 33 (0)5 61 93 33 33

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 1 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 53 – INSPECTION OF FUSELAGE BULK CARGO FRAMES AT DOOR SUPPORT

AND LATCH FITTINGS LOCATION AIRCRAFT TYPE: A330,A340 OUR REF.: A53L012-16 Rev 00 dated 30-MAY-2016.

1. AIRCRAFT AFFECTED MSN400 and following, having accumulated more than 12500FC since first flight, at the date of the first issuance of this AOT

2. REFERENCED DOCUMENTATION

2.1 APPENDIX Appendix 1. Technical disposition td_k48_s3_01755_2016#b for repair by bushes of door support attachment holes.

Appendix 2. Technical disposition td_k48_s3_01754_2016#b for repair at upper door support fitting location only.

Appendix 3. Technical disposition td_k48_s3_01772_2016#a for repair at lower door support fitting and latch fitting location at FR69.

Appendix 4. Technical disposition td_k48_s3_01773_2016#a for repair at lower door support fitting location at FR67.

Appendix 5. AOT reporting sheet.

Appendix 6. NTM Procedure 53-40-18 advanced copy

2.2 REFERENCES Ref 1. AMM 52-33-00 PB 001 CONF 00 - Bulk cargo compartment door - description and operation Ref 2. AMM 52-30-00-010-803-A Opening of the BULK Cargo-Compartment Door Ref 3. AMM 52-30-00-410-803-A Closing of the BULK Cargo-Compartment Door Ref 4. AMM 25-80-00-000-801-A Removal of the Insulation Blankets Ref 5. AMM 25-80-00-400-801-A Installation of the Insulation Blankets Ref 6. NTM Task 51-10-01-250-801-A-01 Ref 7. NTM Task 51-10-08-250-803-A-01 Procedure B Ref 8. NTM Task 51-90-00 Ref 9. NTM Procedure 53-40-18 Ref 10. AIPC 52-33-32-01-FITTING-DOOR FRAME Ref 11. Bulk Door Fittings installation drawing F53475975 Ref 12. SRM 51-42-11 fastener installation and removal – metallic structure Ref 13. SRM 51-43-00 fastener oversize and alternative Ref 14. TFU 53.40.00.005

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 2 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

3. REASON The purpose of this AOT is to request the inspection of fuselage bulk cargo door frames at  door support attachment fittings at FR67 RHS stringer 37 and 43;

 door support attachment fittings at FR69 RHS stringer 38 and 45;

 latch fitting at FR69 RHS stringer 44.

3.1 FACTS In frame of A330 ESG exercise, it has been identified that Tartaric Sulfuric Anodizing / Chromic Acid Anodizing surface treatment is present in some frame holes from MSN400 onwards, following production process modification.

On Bulk cargo door frames FR67 and FR69 RHS, the door fittings attachment holes have this TSA/CAA treatment, which leads to detrimental effect on fatigue behaviour.

There is currently no inspection in place to detect reliably a cracked fuselage bulk cargo door frame.

3.2 CONSEQUENCES This condition, if not corrected, could lead to critical cracks in primary structure. While this kind of damage has not been experienced in service so far, such scenario could lead to the loss of the bulk cargo door.

3.3 AIM The aim of this AOT is to provide instructions for inspection on the most critical holes and to apply corrective action on any crack detected during the inspection.

4. SHORT TERM ACTION

4.1 PLANNING AND MANPOWER

4.1.1 ACCOMPLISHMENT TIMESCALE For all A/C identified in Paragraph 1, first inspection of the fittings must be accomplished with a compliance time of 200 FC or 2 months what ever occur first, from the issuance date of this AOT.

It is recommended to perform NDT inspection in order to detect cracks as early as possible to reduce the complexity of the repair.

If rototest or HFEC is used, the inspection is to be repeated every 2900 FC.

If areas are inspected by DET, the inspection is repeated every 150 FC, up to the next maintenance opportunity to perform the NDT inspection.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 3 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Inspection method Holes for door support fittings FR67 and FR69 Rototest Holes for latch fitting FR69 HFEC For both areas DET Table 1: Inspection method

4.1.2 MANPOWER The estimated time to get access and close-up is estimated at 1 Mh.

The estimated time to perform rototest inspection for the 4 door support fittings boreholes is estimated at 0.70 Mh.

The estimated time to perform HFEC inspection for the latch fitting boreholes is estimated at 0.25 Mh.

The estimated time to perform DET inspection per door support/latch fitting is estimated at 0.15 Mh.

The manpower estimates given in this AOT are based on the direct labour cost to do the work. These estimates assume that the work will be done by experienced personnel, and may need to be revised upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or inspect the work. Manufacturing and procurement of parts and tools, drying times for paints, sealants, etc., and general administration work are also not included.

4.2 DESCRIPTION

4.2.1 ACCESS Open the bulk cargo door as per Ref 2.

For NDT inspection only, remove the insulation in the inspection area as per Ref 4.

4.2.2 INSPECTION REQUIREMENTS A/ Door support fittings:

Rototest inspection must be accomplished according to Ref 9, at locations shown in Figure 1.

The fasteners are removed and reinstalled one by one (see Ref 12).

NOTE: The bulk door fittings do not have to be removed to perform this inspection For further details about rototest inspection, refer to Ref 6.

Page 4OCROpen in PDF

AIRBUS

ALERT OPERATORS TRANSMISSION - AOT FR71 FR69 FR67 FR59 STGR36RH STGR45RH NOTE:

• HOLES TO BE INSPECTED

- FOR REFERENCE ONLY

ULK DOOF

TTACHMENT FITTIN STGR36RH STGR42RH

BULK DOOF

ATTACHMENT FITTING STGR43RH STGR37RH STGR38RH STGR44RH INBD FR69

ATTACHI FITTING BULK DOOF

ATTACHMENT FITTING STGR38RH STGR43RH STGR44RH STGR45RH Figure 1: Holes at door support fittings of FR67 RHS and FR69 RHS OT ref: A53L012-16 Rev 00 Page 4 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 5 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT B/ Latch fitting:

HFEC inspection must be accomplished according to Appendix 6, at locations shown in Figure 2.

For further details regarding HFEC inspection, refer to Ref 7.

Figure 2: Holes at Latch fitting of FR69 RHS

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 6 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT C/ Alternative inspection If DET inspection is preferred, visually inspect the frame around the fitting from the visible side of the frame.

Figure 3: Visual inspection principle For further details regarding visual inspection, refer to Ref 8.

4.2.3 FINDINGS In case of findings, before next flight, please provide full inspection report, using Appendix 5 reporting sheet, to Airbus Customer Services Repair Teams through TechRequest, selecting Repair Domain, to get instructions.

In case of nil finding, report to AIRBUS using Appendix 5 reporting sheet within 15 days and repeat inspection as per Paragraph 4.1.1.

Findings in boreholes are expected in the frame layer. Repair solutions have been defined accordingly.

Appendices 1 to 4 provide general repair principle depending of the size and the location of the finding.

These appendices enable to check raw material availability to prepare repair activity if any.

Appendix 1 provides repair instructions with bushes for door support fitting area only.

If findings cannot be repaired with Appendix 1 or for latch fitting area:

 Appendix 2 gives a temporary repair principle for upper door support fitting area  Appendix 3 gives a temporary repair principle for lower door support fitting and/or latch fitting location at FR69  Appendix 4 gives a temporary repair principle for lower door support fitting location at FR67.

Frame replacement could be considered as a terminating action.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 7 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.3 SPARES AND TOOLING For NDT tooling, refer to:

 Ref 6 for rototest  Ref 7 for HFEC.

As precautionary measure, Airbus recommends to order the fasteners that will be removed during rototest inspection:

description Nominal Part number Quantity Bolt hexagon head NSA5031-4-7 8 Bolt hexagon head NSA5031-4-5 8 Nut self-locking NAS1726-4E 16 Table 2: Fasteners removed during rototest inspection For more information about part numbers in the area, refer to Ref 10 and Ref 11.

For oversize or alternative of fasteners, references are available in Ref 13.

If frame replacement is required, please contact Airbus AOG spares (e-mail: aog.spares@airbus.com).

For your information, replacement frame part numbers are the following  F534-75650-208-90 (FR67 RHS)  F534-75651-204-90 (FR69 RHS)

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN A serial modification will change the TSA/CAA application process from MSN1780 (MOD 206221).

An ISB will be issued to cover inspection on all affected aircraft from MSN400 to MSN1779.

The ISB should take over this AOT requirement.

A modification SB will also be issued to cancel the inspection requirement.

Further information will be communicated to operators within TFU Ref 14.

5.2 IMPACTED DOCUMENTATION NTM Procedure 53-40-18 to add latch fitting inspection

6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.

It is anticipated that this AOT will be rendered mandatory.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53L012-16 Rev 00 Page 8 of 8 Date: 30-MAY-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

7. REPORTING Questions about this AOT and inspection results with or without findings are to be addressed to Airbus Customer Services through TechRequest on Airbus World, to SEES1_FUSELAGE, DOORS AND WINDOWS team, selecting Engineering Domain and ATA 53-40/Topic AOT A53L012-16 Rev 00.

Best Regards, Jean-Luc MOUYSSET

VICE PRESIDENT ENGINEERING SUPPORT

CUSTOMER SERVICES Sabine KLAUKE VICE PRESIDENT A330/A340 PROGRAMME

CUSTOMER SERVICES

Page 9OCROpen in PDF

AIRBUS Technical Disposition Ref.: TD_K48_S3_01755_2016 A/C: A330/A340-ALL-ALL MSN: ALL Task Ref.: Issue: B Compiled: U. Müller Date: 12 May 2016 Page: 1 of 2 Approved: J. Sembach

1. GENERIC REPAIR PRINCIPLE This TD defines (in principle) the repair by bushes in case of crack findings during inspection of door support attachment holes at Bulk Cargo Door surrounding Frames.

This generic principle is applicable at FR67 & FR69 within given limits, refer to para.3.

2. GENERAL INFORMATION SRM references:

51-21-00 protective treatment 51-22-00 corrosion prevention paint coatings 51-27-11 cutting and machining of metallic structure bushloc installation procedure 51-72-11 replacement of structural components 51-73-12 repair by installation of a freeze plug 51-75-12 repair of paint coatings 51-76-00 sealing repairs NOTE: All stated SRM references in this document refer to Long Range - SRM, Rev. 01 APR 2016 CAUTION: Avoid any damage to the remaining structure, reusable parts and fastener holes

3. REPAIR INSTRUCTION

- Remove and salvage all parts necessary to gain access to the repair area.

- Remove door support and adjacent structure to gain access to the repair area.

Obey AMM 52-33-32.

- Determine the crack length.

option A:

If bush diameter ≤ 12 mm follow the instructions for countersunk BUSHLOC installation given in SRM 51-48-12.

approved material: aluminum alloy 7075 T6 or 7175 T7351 option B:

If bush diameter >12 ≤ 15 mm follow the instructions for countersunk FREEZE PLUG installation given in SRM 51-73-12.

approved material: aluminum alloy 2024 T351

- For design requirements of countersunk bush refer to SRM 53-00-11 figure 220, sh. 2.

- In case of multiple crack findings contact AIRBUS.

Copyright AIRBUS S.A.S. 2016. All rights reserved his document contains Airbus S.A.S. (Societe par Actions Simplifiee) proprietary information and shall at all times remain the property of AIRBUS S.A.S lo intellectual property right or license is granted by AIRBUS S.A.S. in connection with any information contained in i It shall be treated as confidential, shall not be disclosed in whole or in part to any third party and shall not be duplicated in any manner, without AIRBUS S.A.S. prior written consent.

Page 10OCROpen in PDF

AIRBUS Technical Disposition Ref.: TD_K48_S3_01755_2016 A/C: A330/A340-ALL-ALL MSN: ALL Task Ref.: Issue:

Compiled: U. Müller Date: 12 May 2016 Page: 2 of 2 Approved: J. Sembach MAX. NUMBER OF BUSHES AT DOOR SUPPORT ATTACHMENT HOLES 1 EA WITH MAX. ø15 mm OR 2 EA WITH MAX ø12 mm (VARIOUS ARRANGEMENTS)

- COUNTERSUNK COUNTERSUNK

BUSH BUSHES STGR

LOAT LEET CAUTION:

THE SHOWN BUSH REPAIR IS ONLY APPLICABLE AT LOCATION HOLES (4) FOR DOOR SUPPORT.

IN CASE OF CRACK FINDINGS AT HOLES IN THE AREA OF LATCH SPIGOT FITTING, CONTACT AIRBUS.

- All parts removed due to access reasons have to be reinstalled acc. SRM 51-72-11.

- Reinstallation and adjustment of door support has to be performed acc.

AMM 52-33-32.

Surface Protection:

→ ON BUSH:

Follow the instructions given in SRM 51-48-12 or 51-73-12 according to used option for bush repair.

→ ON DOOR SUPPORT:

Restore surface protection and sealant as per AMM 52-33-32.

Copyright AIRBUS S.A.S. 2016. All rights reserved his document contains Airbus S.A.S. (Societe par Actions Simplifiee) proprietary information and shall at all times remain the property of AIRBUS S.A.S Vo intellectual property right or license is granted by AIRBUS S.A.S. in connection with any information contained in i It shall be treated as confidential, shall not be disclosed in whole or in part to any third party and shall not be duplicated in any manner, without AIRBUS S.A.S. prior written consent This Technical Disposition - T (TDT) only covers design aspects and excludes workmanship aspects t has been prepared for a specific aircraft or components, based on the original AIRBUS S.A.S. Type Certificate, and solely on the basis of the information supplied to AIRBUS S.A.S This TDT is not to be used for any other aircraft or component or any other purposes than for which it was supplied without the written approval of Airbus S.A.S. (Societe par Actions Simplifiee)

Page 11OCROpen in PDF

AIRBUS Technical Disposition Ref.: TD_K48_S3_01754_2016 A/C: A330/A340-ALL-ALL MSN: ALL Task Ref.: Issue: B Compiled: U. Müller Date: 12 May 2016 Page: 1 of 5 Approved: J. Sembach

1. GENERIC REPAIR PRINCIPLE This TD defines (in principle) the corrective action in case of crack findings during inspection of door support attachment holes at Bulk Cargo Door surrounding Frames.

This generic principle is applicable at FR67 & FR69.

GENERAL INFORMATION SRM references:

51-21-00 protective treatment 51-22-00 corrosion prevention 51-23-11 paint coatings 51-25-00 51-26-11 51-27-11 cutting and machining of metallic structure 51-40-00 fasteners general 51-42-11 fastener installation and removal - metallic structure 51-43-00 fastener oversize and alternatives 51-44-11 fasteners hole and drill data - metallic structure 51-46-11 countersinking in metallic structure 51-47-00 fastener spacing and margin data 51-70-20 general repair requirements 51-72-11 replacement of structural components 51-73-00 repair of minor damage (para. 6 for crack stop drilling) 51-75-12 repair of paint coatings 51-76-00 sealing repairs NOTE: All stated SRM references in this document refer to Longe Range - SRM, Rev. 01 APR 2016 CAUTION Avoid any damage to the remaining structure, reusable parts and fastener holes For all fastener types that are removed in order to gain access to the repair area and not indicated on the sketch below, the original fastener type has to be installed or next OVZ in accordance with SRM 51-43-00.

EN6081D fastener type has to be heat treated as per SRM 51-25-00 procedure.

REPAIR INSTRUCTION Remove and salvage all parts necessary to gain access to the repair area.

Remove door support and adjacent structure to gain access to the repair area.

Obey AMM 52-33-32.

Rework frame stiffener and support sheet to enable repair part installation as shown on next page.

Plug existing holes with EN6069AD5-xx as shown on page 2.

Copyright AIRBUS S.A.S. 2016. All rights reserved

Page 12OCROpen in PDF

AIRBUS Technical Disposition Ref.: TD_K48_S3_01754_2016 A/C: A330/A340-ALL-ALL MSN: ALL Task Ref.: Issue: B Compiled: U. Müller Date: 12 May 2016 Page: 2 of 5 Approved: J. Sembach

REQUIRED REWORK * SRICSKHOLE-

REWORK FOR PROPER

INSTALLATION OF FILLER (S&RH) + CLOSED HOLE

CSK/CSK

REWORKED

STIFFENER

FLUSH TO WEB CUTOUT

IN SUPPORT SHEET

EWORKED STIFFEN

USH TO W (STER) (FR69) PLUG WITH EN6069AD5; CSK DEPTH =0.4 mm PERFORM CRACK STOP DRILLING ACC. SRM 51-73-00

IF LIMITS FOR POSSIBLE BUSH INSTALLATION AS PER TD_K48_S3_01755 ARE EXCEEDED Copyright AIRBUS S.A.S. 2016. All rights reserved his document contains Airbus S.A.S. (Societe par Actions Simplifiee) proprietary information and shall at all times remain the property of AIRBUS S.A.S Vo intellectual property right or license is granted by AIRBUS S.A.S. in connection with any information contained in i It shall be treated as confidential, shall not be disclosed in whole or in part to any third party and shall not be duplicated in any manner, without AIRBUS S.A.S. prior written consent This Technical Disposition - T (TDT) only covers design aspects and excludes workmanship aspects It has been prepared for a specific aircraft or components, based on the original AIRBUS S.A.S. Type Certificate, and solely on the basis of the information supplied to AIRBUS S.A.S This TDT is not to be used for any other aircraft or component or any other purposes than for which it was supplied without the written approval of Airbus S.A.S. (Societe par Actions Simplifiee).