On this page
Copies · 2
Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.
© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0334, the docket of AD 2021-17-03. Not covered by OpenAirDocs’ CC0 dedication.
© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-3148; AD 2017-12-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Manufacturer
- Airbus
- Type
- All Operators Transmission
- Number
- A53N009-14
- Copies
- 2 files of 1 revision
A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 7
No revision named, the newest copy. From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0334, the docket of AD 2021-17-03. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '958c6080f94e343e3e24ba444f9ea0ec296de8e9310d20f22e481d3006a5ff40' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '958c6080f94e343e3e24ba444f9ea0ec296de8e9310d20f22e481d3006a5ff40' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
CUSTOMER SERVICES DIRECTORATE 1 ROND POINT MAURICE BELLONTE 31707 BLAGNAC CEDEX FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 1 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 53 – FUSELAGE SKIN CRACK ABOVE LAP JOINT STR 6 LH/RH BTW FR 35-47 AIRCRAFT TYPE: A320 OUR REF.: A53N009-14 Rev 01 dated 04-AUG-2016.
**BEG. REV**
0. REASON FOR REVISION The purpose of this AOT revision is to enlarge the inspection area on the pocket radii located from FR35-FR40 to FR35-FR47 and to revise inspection intervals.
**END REV**
1. AIRCRAFT AFFECTED MSN 0977, 1007, 1009, 1011, 1013, 1026 and 1030.
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix 1: AOT A53N009-14 reporting sheet
2.2 REFERENCES **BEG. REV** Ref. A: Panel D533-70103-208-00 Ref. B: Structure Section 15/21 assembly drawing D533-70000 sheet 49 Ref. C: SRM 53-31-11 Figure 1 Sheet 3 Item 1C Ref. D: TD 705/NDT7012/2014 Issue C– LFEC INSPECTION PROCEDURE Ref. E: NTM 51-10-08 Procedure B - HFEC INSPECTION FOR SURFACE BREAKING CRACKS Ref. F: NTM 51-10-16 Procedure A - INSPECTION FOR SUB-SURFACE CRACKS Ref G: AMM 05-22-00-200-002 - Zonal Inspection of the Upper Half of the Fuselage Ref H: AMM 05-22-40-200-003 - GVI OF CENTER PASSENGER OVERHEAD COMPARTMENT Ref I: SRM 53-00-11 PB 201 Repairs - SKIN PLATES Ref J: TFU 53.30.00.005 - FUSELAGE SKIN CRACK ABOVE LAP JOINT STR 6 LH BTW FR 36-37 Ref K: AOT A53N007-14 - SAFAM inspection requirements for external repairs on 1.2 mm fuselage skin Ref L: NTM 51-90-00 – VISUAL TESTING **END REV**
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 2 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3. REASON **BEG. REV** The purpose of this AOT is to request a repetitive inspection on the pocket radii located between frame 35 and frame 47 stringer 6 left and right hand sides (see Figure 1). The affected panel is Ref. A and Ref C. See Ref. B for assembly details.
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 3 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Figure 1. Inspection area: pocket radii above P6 LHS/RHS between FR35-FR47 **END REV**
1.6 mm
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 4 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.1 FACTS An operator reported a crack during (Ref. K) AOT accomplishment. The detection of the crack reported was not the aim of the Ref. K AOT. A 170mm through-thickness crack was found in the pocket radius between frame 36 and 37 above stringer 6 left hand side lap joint (see Figure 2 and Figure 3). Prior to this finding, the operator reported noise in the area during several weeks.
Figure 2. Example of finding: 170mm through crack Figure 3. Ref B extract detailing the possible crack location
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 5 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.2 CONSEQUENCES An undetected crack could lead to in-flight cabin pressure loss that would force an emergency landing.
3.3 AIM **BEG. REV** The aim of this AOT revision is to detect a possible crack in the pocket radii between frame 35 and 47 above stringer 6 left and right hand side lap joints.
**END REV**
3.4 INVESTIGATION No crack initiation was expected in this area as the factored fatigue life is well above the design service goal. Fractographic analysis and detailed calculations show two possible contributors to the early initiation.
Handling, maintenance or manufacturing issues could have contributed to the early crack initiation.
Additionally, thickness step causes stress concentration increase in the area which accelerates the initiation. During laboratory investigations, multiple micro cracks were observed in the affected pocket radius, which is an indication of high secondary bending in the area. A more detailed investigation on all these contributors is currently ongoing.
This AOT is limited to aircraft fitted with panels manufactured with the same manufacturing process (chemical milling), which received rework during manufacturing, similar to the panel in the aircraft with the reported crack finding.
**BEG. REV** Further laboratory investigations and testing of the affected panel described in section 3.1 have revealed that cracks could also initiate and propagate between frame 40 and 47 and not only between frame 35 and 40.
**END REV**
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE **BEG. REV** The area between frame 40 and frame 47, introduced in the Rev 01 of this AOT, must be inspected within 4 months or 750FC, whichever occurs first, from AOT Rev 01 issuance. The operator has the choice to inspect either from inside or outside.
Airbus strongly recommends to accomplish the full inspection from frame 35 to frame 47 within 4 months or 750FC, whichever occurs first, from AOT Rev 01 issuance to avoid having different scheduling between original area in Rev 00 (frame 35 to frame 40) and enlarged area in Rev 01 (frame 40 to frame
47).
**END REV**
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 6 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.1.2 MANPOWER The time to perform this inspection is approximately 4 to 5 Man Hours. This is the time to perform the inspection only, either from outside or inside, when access is available.
4.2 DESCRIPTION
4.2.1 ACCESS **BEG. REV** From outside: as per Ref. G, a 6m (20ft) platform is needed to reach the area.
From inside: as per Ref. H, ceiling and side panels, overhead stowage, insulation blankets to be removed **END REV**
4.2.2 INSPECTION REQUIREMENTS **BEG. REV** The inspection must be accomplished from, either:
- Inside as per Ref. E and Ref. L (using magnifying glass to identify paint cracking) or
- outside as per Ref. D.
**END REV**
4.2.3 FINDINGS
- In case of findings, repair as per Ref. I before next flight or contact Airbus if the damage is beyond SRM limits for repair instructions. Panel replacement after repair is not excluded and needs to be assessed on a case by case basis.
- In case of nil findings repetitive inspection applies on the area every:
**BEG. REV** 1680FC if inspected from inside as per Ref. E or 1400FC if inspected from outside as per Ref. D.
- In any of the above cases, please report to Airbus using appendix 1 reporting sheet. In case of paint cracking only, please report with pictures attached.
**END REV**
4.3 SPARES AND TOOLING Equipment to perform the inspection are given in:
Ref F for inspection accomplished from outside, Ref E for inspection accomplished from inside.
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A53N009-14 Rev 01 Page 7 of 7 Date: 04-AUG-2016 © AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN The follow-up plan will be defined upon inspection results and the ongoing investigation outcome. In the event of a high finding rate, the inspection requirement could be extended to all aircraft on which a panel with the very same manufacturing process is installed. In such a case an ISB is expected to replace this AOT. Updates on the progress will be given via Ref. J Technical Follow Up (TFU).
5.2 IMPACTED DOCUMENTATION N/A
6. AOT APPROVAL The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
7. REPORTING **BEG. REV** Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Maintenance & Engineering Domain, Engineering Support Section and ATA 53- 31/Topic AOT A53N009-14 Rev 01.
Inspection results (findings and/or nil findings) are to be sent to Airbus generic e-mail address inspection.results@airbus.com as per OIT 999.0018/16 Rev 00.
**END REV** Best Regards, Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES Gilles DE CEVINS VICE PRESIDENT A320 PROGRAMME