Other document · Airbus

Revision 1AOT A57N018-21_Rev 01 · 13 pages · 710 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-1702, the docket of AD 2025-13-10. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-1702 (document 0009) · AD 2025-13-10

Manufacturer
Airbus
Type
All Operators Transmission
Number
A57N018-21
Latest revision known
A57N018-21, Revision 1, dated June 14, 2023

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

Text · 13

From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-1702, the docket of AD 2025-13-10. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'ac0035b86a305b04afbeabeb268e46218cd4381ab3e1b99e05c61cdfc46d2aec'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 1 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 57 – INSPECTION OF BOTTOM WING SKIN PANEL 2 AT MANHOLE COVERS AREA BETWEEN RIB13 and RIB26 AIRCRAFT TYPE: A319, A320, A321 OUR REF.: A57N018-21 Rev 01 dated 14-JUN-2023 OUR PREVIOUS REF: A57N018-21 Rev 00 dated 08-NOV-2021 EFFECTIVITY DATE: 28th of June 2023 ***BEG REV***

0. REASON FOR REVISION This AOT revision is issued:

- to extend the inspection area originally ending at RIB23 up to the RIB26,

- to include the A320FAM_NEO aircraft,

- to introduce a reduced compliance time for the A320FAM_CEO ACJ Corporate Jet variants,

- and to revisit the A320FAM_CEO compliance time.

The revised paragraphs are indicated between ***BEG REV*** and ***END REV***.

***END REV***

1. AIRCRAFT AFFECTED ***BEG REV*** -A319/A320/A321_CEO aircraft equipped with Sharklet devices installed in production or in-service as per Airbus Service Bulletin (SB A320-57-1173, or SB A320-57-1186 or SB A320-57-1187 or SB A320-57-1193).

-And all A319/A320/A321_NEO aircraft.

Note:

-The A318 are excluded from this AOT.

-See Appendix 3 for relevant CEO/NEO aircraft standards and MODs.

***END REV***

2. REFERENCED DOCUMENTATION

2.1 APPENDIX Appendix 1: Inspection Flow Charts Appendix 2: Inspection Report Form ***BEG REV*** Appendix 3: Aircraft Model/MOD - Initial & Repeat Interval Inspection ***END REV***

2.2 REFERENCES Ref.[1] NTM 51-90-00 – Visual Testing – General Ref.[2] AMM task 57-55-11-000-XXX-A – Removal of flap track fairing n°2, 3 and 4 Ref.[3] AMM task 57-55-11-400-XXX-A – Installation of flap track fairing n°2, 3 and 4 Ref.[4] OIT 999.0018/16 – Procedure to report results of ISB and AOT

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 2 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT ***BEG REV*** Ref.[5] EASA AD No. 2021-0256 issued on 16 November 2021: ATA 57 – Wings – Bottom Wing Skin Panel 2 – Inspection Ref.[6] TFU 57.21.00021 – AOT A57N018-21: ATA57 - A320Fam_sharklet Inspection of Bottom Wing Skin Panel 2 at Manhole Access Covers area Btw RIB13 and RIB26 Note: For ref.[2] and ref.[3], “XXX” depends on the aircraft Fleet Serial Number.

***END REV***

3. REASON

3.1 FACTS In the frame of a development structural test, a risk has been identified of potential fatigue cracking from the loaded manhole access covers’ attachment holes in the bottom wing skin panels.

***BEG REV*** It is required to inspect both wings Left Hand (LH) and Right Hand (RH) between Rib13 and Rib26 (see fig.1 and fig.2).

***END REV*** These in-service inspections are required in order to ensure continued airworthiness of Single Aisle aircraft equipped with Sharklet device.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 3 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT ***BEG REV***

MANHOLE ACCESS COVER

BOTTOM WING SKIN PANEL 2 B - B B B

AREA TO BE

INSPECTED

EXTERNAL

SURFACE INSIDE WING TANK Fig.1: Manhole access covers location and attachment principle on the Bottom Wing Skin Panel 2 ***END REV***

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 4 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT ***BEG REV***

VIEW OF BOTTOM WING PANEL EXTERNAL SURFACE AT FLAP TRACK FAIRING N°4 (BETWEEN RIB18-RIB20) TYPICAL VIEW OF BOTTOM WING PANEL EXTERNAL SURFACE BETWEEN RIB13-RIB18 AND RIB20-RIB26

FLAP TRACK FAIRING N°4 Fig.2: External Surface of Bottom Wing Skin Panel – Typical views ***END REV***

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 5 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

3.2 CONSEQUENCES If not detected, crack propagation may reduce the structural integrity of Bottom Wing Skin Panel 2.

3.3 AIM ***BEG REV*** The aim of this AOT is to provide instructions for a repetitive Detailed Visual Inspection (DVI) on the external surface of the Bottom Wing Skin Panel n°2 between Rib13 and Rib26 around the manhole access covers.

STR.11 STR.8

TYPICAL PANEL

EXTERNAL SURFACE TO

BE INSPECTED (FOR EACH RIB BAY) RIB i (where i=13 to 25) RIB i+1

BOTTOM WING SKIN PANEL 2

FLAP TRACK FAIRING N°4

BOTTOM WING SKIN PANEL 1

BOTTOM WING SKIN PANEL 3 Fig.3: Bottom Wing Panel 2 external surface to be inspected (for both wings) ***END REV***

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 6 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4. SHORT TERM ACTION ***BEG REV*** NOTE: This AOT is classified mandatory by the EASA Airworthiness Directive (AD) No. 2021-0256 (Ref.[5]) expected to be reconsidered in accordance with AOT rev01.

The accomplishment instructions marked as Required for Compliance (RC) must be done to comply with the AD. “RC” is indicating these paragraphs accordingly.

***END REV*** NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words ’in accordance with’ are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the AOT is met within the set parameters.

4.1 PLANNING AND MANPOWER

4.1.1 ACCOMPLISHMENT TIMESCALE – (RC) ***BEG REV*** Perform the initial inspection in accordance with paragraph 4.2 (with FC=Flight Cycles, FH= Flight Hours):

-For the A319/A320/A321_CEO Sharklet: before accumulation of xxxFC or yyyFH (whichever occurs first) since first flight.

See Appendix 3 for relevant xxxFC and yyyFH.

Note: For aircraft which have been already inspected as per AOT rev.00 requirements, it is not requested to inspect the extended area from Rib23 to Rib26 prior to the next planned repeat inspection date.

-For the A319/A320/A321_NEO: before accumulation of xxxFC or yyyFH (whichever occurs first) since first flight or within five (5) months from AOT rev.01 effective date, whichever occurs later.

See Appendix 3 for relevant xxxFC and yyyFH.

Repeat the inspection in accordance with paragraph 4.2 and Appendix 3.

***END REV***

4.1.2 MANPOWER The estimated time to get access and close-up is 10 Man Hours (MH) per aircraft, with two persons (5 MH each).

The estimated time to perform the DVI inspection is 4 MH per aircraft, with two persons (2 MH each).

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 7 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.2 DESCRIPTION

4.2.1 ACCESS ***BEG REV*** Use a standard platform or a cherry picker to get access below both wings to inspect the external surface of the Bottom Wing Skin Panels n°2 between Rib13 and Rib26.

***END REV*** It is not required to remove the manhole access covers.

For both wings, it is required to remove the fixed fairing of the Flap Track n°4 (in accordance with the Ref.[2]) to perform the DVI.

4.2.2 INSPECTION REQUIREMENTS – (RC) ***BEG REV*** On the LH and RH wings between Rib13 and Rib26, perform a DVI in accordance with the Ref.[1] on the external surface of the Bottom Wing Skin Panel n°2, around the manhole access covers. Refer to fig.3 for inspection area.

***END REV*** Note: Before inspection, clean the external panel surface including the radius between the manhole access cover and the bottom wing skin panel.

4.2.3 FINDINGS – (RC) Below picture shows the potential crack locations on the bottom wing skin panel 2 at the manhole bolt holes and at the internal/external panel surfaces:

BOTTOM WING SKIN PANEL 2

MANHOLE ACCESS COVER Potential crack initiation (at manhole bolt hole) External panel surface Internal panel surface Potential crack propagation Fig.4: Potential crack locations

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 8 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Below picture shows the typical crack orientation on the external panel surface. Only two cracks are shown but crack orientation remains the same for all fasteners.

Front edge of Bottom Wing Skin Panel 2Typical crack orientation Typical crack orientation Rib i Rib i+1 Bottom Wing Skin Panel 2 Manhole access cover Rear edge of Bottom Wing Skin Panel 2 Fig.5: Typical crack orientation In case of finding, before next flight, contact Airbus for approved repair instructions and accomplish those instructions accordingly.

Report inspection results (finding and nil finding) as per paragraph 7 within one (1) month after the inspection.

4.2.4 CLOSE-UP In case of nil finding, re-install the fixed fairing of the Flap Tracks n°4 (in accordance with the Ref.[3]) before next flight.

4.3 SPARES AND TOOLING No specific spares and tooling are needed for this inspection.

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN ***BEG REV*** Follow-up on this subject is ensured through the TFU 57.21.00021 (Ref.[6]).

***END REV***

5.2 IMPACTED DOCUMENTATION No specific documentation is impacted.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 9 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

6. AOT APPROVAL The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.

7. REPORTING Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain and ATA 57-20.

Questions about repair in case of finding are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Repair Domain and Airline code.

As per latest reporting policy (Ref to OIT 999.0018/16 Ref.[4]), inspection results as per appendix 2 (with or without finding) are to be addressed to Airbus Customer Services through the generic e-mail address:

inspection.results@airbus.com.

Best Regards, Wolfgang WOHLERS

VICE PRESIDENT ENGINEERING SUPPORT

CUSTOMER SERVICES Jean-Pierre GOMEZ VICE PRESIDENT A320 FAMILY

PROGRAMME

CUSTOMER SERVICES

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 10 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT ***BEG REV*** APPENDIX 1 – Inspection Flow Charts Before the “Initial inspection” presented in Appendix 3 (in FC or FH whichever occurs first) from the aircraft first flight.

For the A319/A320/A321_CEO aircraft From the effective AOT rev.01 issuance date [Inspection flowchart per wing - Both wings to be inspected] Before next flight, contact AIRBUS for instructions.

Perform a Detailed Visual Inspection (as per ref.[1]) on the external surface of the bottom wing skin panel around the manhole access covers.

YESIs damage detected?

NO Repeat inspection (see Appendix 3 for Inspection Interval).

Report inspection results (as per Appendix 2, with indication of NIL finding) to AIRBUS in accordance with ref.[4].

Report inspection results (as per Appendix 2, with indication of finding) to AIRBUS in accordance with ref.[4].

Get access. Remove the fixed fairing of the flap track n°4 (as per ref.[2]).

Reinstall the fixed fairing of the flap track n°4 (as per ref.[3]) before next flight.

Fig.6: Flowchart for A320FAM_CEO aircraft

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 11 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT For the A319/A320/A321_NEO aircraft:

From the effective AOT rev.01 issuance date [Inspection flowchart per wing - Both wings to be inspected] Before next flight, contact AIRBUS for instructions.

Perform a Detailed Visual Inspection (as per ref.[1]) on the external surface of the bottom wing skin panel around the manhole access covers.

YESIs damage detected?

NO Repeat inspection (see Appendix 3 for Inspection Interval).

Report inspection results (as per Appendix 2, with indication of NIL finding) to AIRBUS in accordance with ref.[4].

Report inspection results (as per Appendix 2, with indication of finding) to AIRBUS in accordance with ref.[4].

Get access. Remove the fixed fairing of the flap track n°4 (as per ref.[2]).

Reinstall the fixed fairing of the flap track n°4 (as per ref.[3]) before next flight.

Before the relevant initial inspection presented in Appendix 3 (in FC or FH whichever occurs first) from the aircraft first flight or within 5 months from the AOT rev.01 effective date, whichever occurs later.

Fig.7: Flowchart for A320FAM_NEO aircraft

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N018-21 Rev 01 Page 12 of 13 Date: 14-JUN-2023 © AIRBUS S.A.S. 2023. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT APPENDIX 2 – Inspection Report Form A/C INFORMATION:

OPERATOR:

A/C MSN:

A/C REGISTRATION:

A/C FLIGHT CYCLES:

A/C FLIGHT HOURS:

DATE OF INSPECTION:

VISUAL INSPECTION RESULT:

A B C E I J D H G F RIB23 RIB13 RIB26 M K L Manhole area Identification (LHS shown, RHS symetrical) Manhole area Finding at LH WING (Yes/No) Finding at RH WING (Yes/No) Manhole A (Rib13-14) Manhole B (Rib14-15) Manhole C (Rib15-16) Manhole D (Rib16-17) Manhole E (Rib17-18) Manhole F (Rib18-19) Manhole G (Rib19-20) Manhole H (Rib20-21) Manhole I (Rib21-22) Manhole J (Rib22-23) Manhole K (Rib23-24) Manhole L (Rib24-25) Manhole M (Rib25-26) COMMENTS (free text):