On this page
Text · 28Partly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2026-8793, the docket of AD 2026-18-03. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '646d8be5f1d6661916739af9b2a23d4a315fff7fd658958556371adaeb138bc6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '646d8be5f1d6661916739af9b2a23d4a315fff7fd658958556371adaeb138bc6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Airbus Amber
CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 1 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 57 – A320 FAM Main Landing Gear Support Rib 5 Lug Bore Damage AIRCRAFT TYPE: A318-100, A319-100, A320-200, A320-200N, A321-200, A321-200N, A321-200NX OUR REF.: A57N028-26 Rev 00 dated 07-JUL-2026 EFFECTIVITY DATE: 16 July 2026 Export Control - Not Technical NOTE: AOT effectivity date could be superseded by Airworthiness Directive (AD) effectivity date if any.
1. AIRCRAFT AFFECTED Refer to Appendix 1 for the list of 163 MSNs and their applicable Gear Support Ribs 5 P/N and S/N affected by this AOT.
A/C TYPE MODELS A320 CEO A320-214 A320-216 A320-232 A320-233 A321 CEO A321-211 A321-213 A321-231 A319 CEO A319-115 A319-132 A319-133 A318 CEO A318-112 A320 NEO A320-251N A320-271N A321 NEO A321-271N A321 NEO ACF A321-251NX A321-253NX A321-271NX
2. REFERENCED DOCUMENTATION
2.1 APPENDIX Appendix 1: AOT Affected MSN and Gear Support Rib 5 list Appendix 2: Initial Inspection Threshold Appendix 3: Terminative Action Threshold Appendix 4: Inspection Flowchart Appendix 5: Inspection Reporting Form Appendix 6: Additional Aircraft List
2.2 REFERENCES Ref [1] AMM TASK 32-12-00-010-001 Open the Main Gear Doors for Access Ref [2] AMM TASK 32-12-00-410-001 Close the Main Gear Doors after Access Ref [3] AMM TASK 32-11-11-000-001 Removal of the MLG Leg Assembly Ref [4] AMM TASK 57-51-15-000-001 Removal of the Shroud Box Ref [5] AMM TASK 57-51-15-400-001 Installation of the Shroud Box Ref [6] AMM TASK 32-11-11-400-001 Installation of the MLG Leg Assembly Ref [7] AMM TASK 51-78-00-916-001 Application of Temporary Protection System (TPS) Ref [8] NTM 51-90-00 VISUAL TESTING – GENERAL Ref [9] Repair Instruction R572-43098 Removal of Damage from the Gear Support Rib Lugs & Installation of Oversize Repair Bushes
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 2 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Ref [10] Retrofit Information Letter SA57M26001284 Ref [11] Technical Follow-Up 57.21.00030
3. REASON
3.1 FACTS AND BACKGROUND Airbus informs the operators of the detection of a non-conformity concerning some Main Landing Gear Support Rib 5, located at the outer wingbox and attaching the Main Landing Gear. The non-conformity is tool mark damage in the bore of the forward and aft lugs, which potentially affects some of the inservice Gear Support ribs. The Gear Support Rib 5 is classified as a safe-life structure.
Appendix 1 defines the scope of this AOT. While the non-conformity also impacts the aircraft detailed in Appendix 6, these aircraft remain outside the scope of this AOT as they do not need urgent inspection and are provided for reference only. A forthcoming Mandatory Inspection Service Bulletin (ISB) is expected to supersede this AOT and will incorporate the aircraft listed in Appendix 6.
Refer to Figures 1 and 2 for affected locations.
Figure 1: Main Landing Gear Support Rib 5 overview. LH shown, RH similar.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 3 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Figure 2: Main Landing Gear Support Rib 5 - Aft and Forward lug locations. LH shown, RH similar.
3.2 INVESTIGATION AND ROOT CAUSE During inspection at production, non-conformities were discovered within the Gear Support Rib 5 forward lug between the bushes. Upon removal of the forward and aft lug bushes, multi-location surface damages were discovered, characterized as scratches, shallow dents, and scoring. Refer to Figure 3 for typical damage photos.
Figure 3: Typical damage example (Highlighted by black markers on the left figure to identify surface non-conformity.)
(Non-conformities may occur anywhere around the entire circumference of the bore.)
The root cause is due to an improper bush removal technique used by the supplier at the assembly stage. Removal of the bushes is sometimes required during production due to minor quality findings and only affects a relatively small population.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 4 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.3 CONSEQUENCES The presence of damage in the lug bore could initiate cracks under fatigue loads. This condition, if not detected and corrected, could affect the structural integrity of Gear Support Rib 5 and the main landing gear installation.
4. OBJECTIVES OF THIS AOT This AOT requires a repetitive Detailed Visual Inspection (DVI) of the visible area of the Gear Support Rib 5 lugs. Furthermore, the AOT introduces the necessary actions required to terminate this repetitive inspection.
5. MAINTENANCE PROCEDURE NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in other sections of the AOT. When the words “refer to” are used and the operator has a procedure or tool accepted by the local authority he belongs to, the accepted alternative procedure or tool can be used. When the words “in accordance with” are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the AOT is met within the set parameters.
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The paragraphs 5.1 ACCOMPLISHMENT TIMESCALE, 5.4 INSPECTION and 5.5 INSTRUCTIONS are Required for Compliance (RC) and must be done to comply with the AD. To allow more flexibility, the rule "refer to" and "in accordance with" will apply to these paragraphs 5.1, 5.4 and
5.5. Other paragraphs are recommended and may be deviated from, done as part of other actions or done with accepted methods different from those given in the AOT, as long as the RC paragraphs can be done and the aircraft can be put back into a serviceable condition.
5.1 ACCOMPLISHMENT TIMESCALE - (RC) NOTE: Accomplishment timescale can be superseded by AD compliance time if any.
Perform the visual inspection of each affected Gear Support Rib 5 P/N and S/N listed in Appendix 1 and perform initial inspection in accordance with paragraph 5.4, whichever occurs last between the following options:
without exceeding FC and FH defined in Appendix 2 depending on aircraft configuration OR without exceeding 500FC or 1000FH (whichever occurs first) from AOT effective date Repeat the inspection in accordance with paragraph 5.4 every 500FC or 1000FH (whichever occurs first) from the last AOT inspection.
Perform terminative inspection in accordance with paragraph 5.4 without exceeding FC and FH defined in Appendix 3 depending on aircraft configuration.
Before 3MO from the inspection date, report inspection results to Airbus as defined in paragraph 8, using the inspection reporting form from Appendix 5.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 5 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.2 MANPOWER For initial inspection or each repetitive inspection, estimated required Man Hours (MH) per wing:
Get access: 0.5MH Inspection: 0.5MH Close up: 0.5MH Total: 1.5MH Elapsed time: 1.5MH For terminative inspection, estimated required Man Hours (MH) per wing:
Get access: 54MH Inspection: 56MH Close up: 62MH Total: 172MH Elapsed time: 40MH
5.3 ACCESS AND CLOSE-UP WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND RELATED DOORS
- THE CARGO DOORS
- OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.
5.3.A. For initial inspection or each repetitive inspection:
WARNING:
MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING GEAR.
THIS WILL PREVENT UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAFT AND/OR EQUIPMENT.
Get Access
1. Open MLG doors at zones 734 and/or 744 refer to AMM Ref [1].
2. Put the ACCESS PLATFORM 3M (10 FT) - ADJUSTABLE in position at zones 730 and/or
740.
Close Access
1. Make sure that the work area is clean and clear of tools and other items.
2. Remove the access platform(s).
3. Close MLG doors at zones 734 and/or 744 refer to AMM Ref [2].
5.3.B. For terminative inspection:
WARNING: OBEY THE HYDRAULIC SAFETY PROCEDURES.
WARNING: BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND CAN CAUSE INJURY AND/OR DAMAGE.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 6 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Get Access
1. Remove the LH and/or RH MLG leg assembly, refer to AMM Ref [3].
NOTE: It is recommended jacking the aircraft with load cells. This will be necessary to prevent new jacking, if it is found that the Gear Support Rib 5 has to be replaced.
NOTE: Removal of the torque shaft is recommended to allow for removal / installation of the bushes and for clearance when the honing tool is used.
2. Remove the LH and/or RH shroud box, refer to AMM Ref [4]
3. Put access platforms in zones 730 and/or 740.
Close Access
1. Make sure that the work areas are clean and clear of tools and other items of equipment.
2. Remove the access platform(s).
3. Install the LH and/or RH shroud box, refer to AMM Ref [5].
4. Install the LH and/or RH MLG leg assembly, refer to AMM Ref [6].
5.4 INSPECTION - (RC) Refer to Appendix 4 for inspection flowchart.
Note: Due to the tight access to the area, examine the applicable inspection area using a light source and an inspection mirror.
Note: Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
If the inspection area is not sufficiently clean, clean it with the Textile-Lint free Cotton (Material Ref.
14SBA1) and the Non Aqueous Cleaner - General (Material Ref. 08BAA9).
Note: If you removed the TPS layer during the preparation of the inspection area, apply a new layer of Corrosion Preventive Compound-Water Displacing Soft Film - (Material Ref. 12ABC1) and Corrosion Preventive Compound-Heavy Duty Soft Film - (Material Ref. 12ACC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material Ref. 12ABB1) and Corrosion Preventive Compound- Heavy Duty Hard Film - (Material Ref. 12ACB1), refer to AMM Ref [7].
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
5.4.A. Affected Gear Support Rib 5 P/N and S/N confirmation Perform a visual inspection of each affected wing to confirm the Gear Support Rib 5 P/N and S/N installed on the MSN matches the affected list in Appendix 1.
Refer to Figure 4 for P/N and S/N identification.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 7 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Figure 4: Gear Support Rib 5 P/N and S/N identification location
5.4.B. Initial and repetitive inspection (lug surfaces) Perform a Detailed Visual Inspection (DVI) for cracks in accordance with NTM Ref [8] on the following visible surfaces of the affected Gear Support Rib 5 lugs:
For forward lug:
oArea A: Forward surface (Figure 6) oArea B: Outer visible surface (Figure 7) oArea C: Aft surface (Figure 8) For aft lug:
oArea D: Forward surface (Figure 7) oArea E: Outer visible surface (Figure 8) Between forward and aft lugs:
oArea F: Joint surface (Figure 9)
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 8 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Refer to Figure 5 for a global view of the required inspection area (yellow frame), RH shown, LH similar.
Figure 5: Global view of required inspection area Refer to Figure 6 to 9 for each inspection surface (highlighted in yellow), RH shown, LH similar.
Figure 6: Required inspection Area A Figure 7: Required inspection Area B and D Figure 8: Required inspection Area C and E Figure 9: Required inspection Area F
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 9 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Refer to Figure 10 for the crack damage example found on the forward lug.
Figure 10: Crack damage example found on forward lug (Cracks may appear around the entire lug.)
5.4.C. Terminative inspection (lugs bore holes) Remove bushes of affected Gear Support Rib 5 forward and aft lugs and perform Special Detailed Inspection (SDI) in the lugs bore holes in accordance with Repair Instruction Ref [9] Section A. It is prohibited to proceed Ref [9] Section B without specific instruction from Airbus, regardless of Section A instructions.
NOTE: Terminative inspection is recommended to be performed during heavy maintenance check or MLG overhaul.
Refer to Figure 3 for typical damage.
5.5 INSTRUCTIONS - (RC) During the visual inspection for P/N and S/N, contact Airbus through TechRequest before 7 calendar days from inspection date, and provide the part’s traceability if either of the following conditions applies:
1. The affected Gear Support Rib 5 is not installed on the aircraft.
2. The P/N and S/N are unreadable, and the Gear Support Rib 5 was replaced in-service.
During the initial or repetitive inspection on the lug external surfaces, in case of crack or any damage found, contact Airbus through TechRequest before next flight for repair instruction.
During the terminative inspection in the lugs bore holes, in case of:
nil-finding, replace the bush in accordance with Repair Instruction Ref [9] Section C;
any damage found, contact Airbus through TechRequest before next flight for repair instruction.
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 10 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.6 SPARES AND TOOLING NOTE: Any tool listed as alternate in the Tool and Equipment Manual is acceptable for the accomplishment of the Aircraft Maintenance Manual (AMM) tasks or instructions called in this AOT.
For the initial or repetitive inspection, following tools are necessary:
LIGHT SOURCE - SPARK-PROOF MIRROR - INSPECTION For the terminative inspection, please refer to the AMM Ref [3] to Ref [6] and Repair Instruction Ref [9].
For industry support, please refer to RIL Ref [10].
6. ADDITIONAL INFORMATION
6.1 FOLLOW-UP PLAN This AOT is expected to be mandated by an Airworthiness Directive (AD) published by Airworthiness Authorities. Follow-up information will be provided in TFU Ref [11].
6.2 IMPACTED DOCUMENTATION No specific documentation is impacted.
7. AOT APPROVAL The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.
8. REPORTING Address your acknowledgment and inspection results (with or without findings) to Airbus Customer Services through the In-Service Alerts and Information Cockpit tile on Airbus World by using the referenced AOT page.
Refer to the latest reporting policy (Ref in the OIT 999.0018/16).
You can address your questions about this AOT to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain, Engineering Support Section and ATA 57-26, giving the AOT reference in the title.
Best Regards, Stephen MONTGOMERY
SENIOR DIRECTOR ENGINEERING SUPPORT
CUSTOMER CARE CENTER Designated Airworthiness Engineer (DAE) Caroline CLAVEL VICE PRESIDENT A320 PROGRAMME
CUSTOMER SERVICES
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 11 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT Appendix 1 - AOT Affected MSN and Gear Support Rib 5 list The current AOT is applicable to the following list, which includes a total of 163 MSNs.
Note: N/A refers to Gear Support Rib 5 not affected by this AOT.
MSN A/C Series P/N of Gear Support Rib 5 LH S/N of Gear Support Rib 5 LH P/N of Gear Support Rib 5 RH S/N of Gear Support Rib 5 RH 04963 A320-200 D57252181012 4747 N/A N/A 05084 A320-200 D57252181012 4694 N/A N/A 05387 A320-200 D57252181012 5087 N/A N/A 05517 A320-200 D57252181012 5123 N/A N/A 05542 A320-200 N/A N/A D57252181013 5459 05545 A318-100 N/A N/A D57252181013 5435 05548 A320-200 N/A N/A D57252181013 5446 05552 A320-200 N/A N/A D57252181013 5303 05554 A320-200 N/A N/A D57252181013 5433 05557 A320-200 N/A N/A D57252181013 5383 05580 A320-200 D57252181012 5338 N/A N/A 05585 A320-200 D57252181012 5361 N/A N/A 05587 A320-200 N/A N/A D57252181013 5358 05593 A320-200 N/A N/A D57252181013 5467 05595 A320-200 D57252181012 5333 N/A N/A 05599 A320-200 N/A N/A D57252181013 5512 05604 A320-200 D57252181012 5398 D57252181013 5357 05608 A320-200 N/A N/A D57252181013 5462 05616 A320-200 D57252181012 5379 N/A N/A 05632 A320-200 D57252181012 5309 D57252181013 5331 05645 A320-200 N/A N/A D57252181013 5377 05650 A319-100 D57252181012 5390 N/A N/A 05658 A320-200 D57252181012 5383 N/A N/A 05664 A320-200 D57252181012 5313 N/A N/A 05671 A320-200 N/A N/A D57252181013 5283 05675 A320-200 D57252181012 5499 N/A N/A 05679 A320-200 D57252181012 5395 N/A N/A 05694 A320-200 N/A N/A D57252181013 5513 05701 A320-200 N/A N/A D57252181013 5653 05727 A320-200 D57252181012 4984 N/A N/A 05729 A320-200 D57252181012 5248 N/A N/A
Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57N028-26 Rev 00 Page 12 of 28 Date: 07-JUL-2026 C80_AOT_FM1104649_v10.0 © AIRBUS S.A.S. 2026. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT MSN A/C Series P/N of Gear Support Rib 5 LH S/N of Gear Support Rib 5 LH P/N of Gear Support Rib 5 RH S/N of Gear Support Rib 5 RH 05741 A320-200 N/A N/A D57252181013 5745 05748 A320-200 D57252181012 5612 D57252181013 5733 05769 A320-200 N/A N/A D57252181013 5730 05776 A320-200 D57252181012 5654 N/A N/A 05779 A321-200 D57255511004 5644 N/A N/A 05805 A320-200 D57252181012 5260 N/A N/A 05807 A320-200 N/A N/A D57252181013 5670 05812 A320-200 N/A N/A D57252181013 5726 05814 A320-200 N/A N/A D57252181013 5790 05818 A320-200 D57252181012 5358 N/A N/A 05821 A320-200 D57252181012 5616 N/A N/A 05822 A320-200 D57252181012 5255 N/A N/A 05826 A319-100 N/A N/A D57252181013 5671 05828 A320-200 N/A N/A D57252181013 5715 05834 A321-200 D57255511004 5584 N/A N/A 05846 A320-200 N/A N/A D57252181013 5559 05847 A320-200 D57252181012 5666 N/A N/A 05851 A320-200 D57252181012 5271 D57252181013 5740 05857 A320-200 N/A N/A D57252181013 5752 05859 A320-200 N/A N/A D57252181013 5644 05860 A321-200 N/A N/A D57255511005 5769 05865 A321-200 N/A N/A D57255511005 5412 05866 A320-200 D57252181014 5578 N/A N/A 05870 A320-200 D57252181014 5072 N/A N/A 05879 A320-200 N/A N/A D57252181013 5722 05882 A320-200 D57252181014 5577 N/A N/A 05889 A320-200 D57252181014 5552 N/A N/A 05925 A320-200 N/A N/A D57252181015 5814 06026 A320-200 N/A N/A D57252181015 5929 06052 A319-100 N/A N/A D57252181015 5858 06060 A320-200 N/A N/A D57252181015 5888 06077 A320-200 D57252181014 5890 N/A N/A 06118 A320-200 N/A N/A D57252181015 6006 06130 A321-200 N/A N/A D57255511007 6070 06151 A320-200 D57252181014 5941 N/A N/A 06153 A320-200 N/A N/A D57252181015 6028