Other document · Airbus

On this page

Copies · 2

Copies of this document that the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

No revision namedAOT A57W017-21 · 9 pages · 478 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-1172, the docket of AD 2022-11-01. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2021-1172 (document 0005) · AD 2022-11-01

No revision namedAOT A57W017-21 Rev 01 · 9 pages · 810 KB

© Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-2141, the docket of AD 2025-01-07. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2024-2141 (document 0006) · AD 2025-01-07

Manufacturer
Airbus
Type
Alert Operators Transmission
Number
A57W017-21

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

ADs that cite it · 1

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Text · 9Partly OCR

No revision named, the newest copy. Some pages are OCR from a scan. OCR can misread letters and numbers. © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-1172, the docket of AD 2022-11-01. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '17365e38f9451885ef33d670f25223e38756c0e1abb8e47fe427fd1ccc6d252e'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

CUSTOMER SERVICES DIRECTORATE 2 ROND POINT EMILE DEWOITINE 31700 BLAGNAC FRANCE TELEPHONE + 33 (0)5 61 93 33 33

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 1 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT SUBJECT: ATA 57 – Inspection of MLG RIB 5 lower flange for cracks AIRCRAFT TYPE: A300, A300-600ST, A300-600 OUR REF.: A57W017-21 Rev 00 dated 01-JUL-2021 EFFECTIVITY DATE: 15 July 2021

1. AIRCRAFT AFFECTED This AOT is applicable to pre MOD 11912 aircraft (A/C) as listed in the table below.

A/C Type MSN 075 080 090 107 126 139 141 151 154 157 173 175 183 203 210 212 227 235 239 255 256 261A300 274 277 292 299 302 358 361 365 380 388 401 405 408 417 464 477 479 518 521 530 532 536 543 546 553 555 557 559 561 572 575 579 581 584 602 603 607 608 611 613 617 618 621 623 625 626 630 632 633 637 641 643 657 659 664 666 668 670 677 679 683 688 696 701 703 707 709 711 713 715 717 722 723 724 725 726 727 728 729 730 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 748 749 750 752 753 754 755 756 757 758 759 760 761 762 763 764 766 768 769 770 771 772 773 774 775 777 778 779 780 781 783 A300-600 789 790 791 A300-600ST 001 002 003 004

2. REFERENCED DOCUMENTATION

2.1 APPENDIX Appendix 1: Inspection Flow Chart Appendix 2: Inspection Report Form

2.2 REFERENCES [1] SB A300-57-0254 R1: WINGS - STRUCTURE - MLG RIB 5 FURTHER SPOTFACING ON BOTTOM FLANGE (FOR A/C Type A300) [2] SB A300-57-6110 R1: WINGS - STRUCTURE - MLG RIB 5 FURTHER SPOTFACING ON BOTTOM FLANGE (FOR A/C Type A300-600)

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 2 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT [3] SB A300-57-9022 R1: WINGS - STRUCTURE - MLG RIB 5 FURTHER SPOT FACING ON BOTTOM FLANGE (FOR A/C Type A300-600ST) [4] A300 / A300-600 / A300-600ST - AMM 32-31-46, Page block 401 [5] A300 - NTM 57-42-12 Part 9 [6] A300-600 NTM 57-51-34 Part 9 Procedure C [7] TFU 57.50.00034: Gear Rib 5 - Crack at bottom flange - Post SB Mod [8] SB A300-57-0246 Rev 4: WINGS - TRAILING EDGE - INSPECTION OF MLG RIB 5 LOWER FLANGE FOR CRACKS AFTER EMBODIMENT OF SB A300-57-0235 [9] SB A300-57-6101 Rev 4: WINGS - TRAILING EDGE - INSPECTION OF MLG RIB 5 LOWER FLANGE FOR CRACKS AFTER EMBODIMENT OF SB A300-57-6088 [10] SB A300-57-9007 Rev 3: WINGS - MLG ATTACHMENT RIB 5 - MODIFY THE MLG RIB 5 BY RE-SPOTFACING ON THE BOTTOM FLANGE.

3. REASON

3.1 FACTS Two recent cases of Gear Rib Lower Flange cracks have been discovered during routine maintenance checks by operators of A300-600 A/C. Cracks were found extending from the Lower Flange Edge between holes 48 and 49, through hole 47 spot-face, into the web towards the Rear Spar Plate (see details of Gear Rib 5 in figure 1). In both cases the damage was beyond repairable limits and required gear rib replacement before next flight.

Cracking of the Gear Rib 5 lower flange at this location has occurred on a number of aircraft previously.

Airbus introduced modifications to specific lower flange spot-faces through mandated Service Bulletin (SB) Ref [1], [2] or [3]. These SB provided terminating action for previous inspection requirements as per SB Ref [8], [9] or [10].

The new crack findings are on 2 A/C which had previously accomplished the terminating action SB Ref [1], [2] or [3].

Page 3OCROpen in PDF

AIRBUS

ALERT OPERATORS TRANSMISSION - AOT

REAR SPAR FWD DATUM PLAN VIEW LH WING HOLE 43 OUTBOARD HOLE 47 HOLE 48 HOLE 49 HOLE 50 HOLE 52

- HOLE 54 ALL VIEWS LEFT HAND, GEAR RIB 5

RIGHT HAND SIMILAR MAIN LANDING

GEAR - REAR

BEARING LUGS

VIEW LOOKING OUTBOARD

IETRACTION JACI

TTACHMENT POIN

PICK-UP FOR TWO

REACTION RODS

• FWD

MAIN LANDING

GEAR - FRONT

TRUNNION BEARING

MODIFICATION AREA

REAR SPAR DB7 57 60 88 AA AA A DATUM NOTE: MAIN LANDING GEAR MAIN LANDING GEAR - GEAR RIB 5 NOT SHOWN FOR CLARITY

REAR BEARING LUGS Figure 1: Main Landing Gear Rib 5 - Inspection Area AOT ref: A57W017-21 Rev 00 Page 3 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 4 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

3.2 CONSEQUENCES A crack on the Main Gear Rib 5 if not corrected, could affect the structural integrity and repair capability of the Gear Ribs.

3.3 AIM The aim of this AOT is to provide instructions for a one-time inspection of all pre-mod 11912 A/C listed in the effectivity section (see paragraph 1). A Fluorescent Penetrant inspection is requested with the intention to detect small cracks which may be repairable and therefore avoid potential gear rib replacement.

3.4 INVESTIGATION The root cause of cracking on the post-SB A/C has not yet been determined. Airbus is recovering the cracked gear rib 5 in order to perform a laboratory investigation to understand the root cause.

4. SHORT TERM ACTION NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness Directive (AD). The accomplishment instructions marked as Required for Compliance (RC) must be done to comply with the AD. “RC” is indicating these paragraphs accordingly.

NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure accepted by the local authority he belongs to, the accepted alternative procedure can be used. When the words ’in accordance with’ are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit or add access and/or close-up steps to add flexibility to their maintenance operations as long as the technical intent of the AOT is met within the set parameters.

4.1 PLANNING AND MANPOWER Airbus recommends to perform the inspection defined in this AOT in a suitable location with appropriate maintenance facilities. In case of crack findings, complex repair or gear rib replacement might be required.

4.1.1 ACCOMPLISHMENT TIMESCALE - (RC) The inspection as described in paragraph 4.2 must be accomplished within 400 Flight Cycles (FC) or 4 months from AOT effective date, whichever occurs first.

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 5 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

4.1.2 MANPOWER The estimated time to perform the inspection is 23 Man Hours per A/C. The elapsed time is estimated at 11.5 hours.

4.2 DESCRIPTION

4.2.1 ACCESS

- Put warning notices in the flight compartment to tell persons not to operate the flight controls.

- Put a movable stair or platform in position adjacent to the inboard side of the Main Landing Gear (MLG) to get access to the inspection area inboard of Gear Rib 5.

- Remove manhole 575AB/675AB to get access to the outboard side of Gear Rib 5.

NOTE: Spanner CHS943 (tool previously used in Ref [8], [9] and [10]) or a similar standard or locally manufactured tool will be required to aid removal of nuts at holes 47 and 54. In case of absence of Spanner CHS943 or equivalent tooling, removal of MLG actuating-cylinder assembly (in accordance with Ref [4]) can be performed to ease access. In case of MLG Actuating Cylinder Assembly removal and re-installation, Aircraft on jacks will be required to carry out a landing gear normal extension and retraction operational test (in accordance with Ref [4]).

4.2.2 INSPECTION REQUIREMENTS - (RC) Note: If the gear rib has been previously replaced by a post MOD 11912 gear rib having part number A57240810-006, -007, -008, -009, -010, -011 then it is not required to perform this inspection.

The procedure that follows is applicable to the Left Hand (LH) and Right Hand (RH) wing.

1. Before starting the inspection, the affected area is to be cleaned. Use Solvent for General Purpose (Mat. No. 11-026).

2. Remove and discard the nuts from the LH and RH gear rib 5 fastener holes 47 and 54 (Refer to Figure 1 for position of holes).

3. Do a Detailed Visual Inspection (DVI) for cracks at the locations that follow:

a. Inspect the bottom flange and vertical web in the area between the wing rear spar / gear rib 5 attachment and the rear bearing lug of the rib, oOn the inboard side, inspect the lower flange, the vertical web and the areas around the fastener holes 43, 47, 48, 49, 50, 52 and 54. Pay particular attention to locations 47 and 54, oOn the outboard side, inspect the lower flange, the vertical web and the areas around the fastener holes.

b. If no crack is found during the DVI, continue with step 4, otherwise go to §4.2.3.

4. Do a Fluorescent Penetrant inspection in the area of the spotface at holes 47 and 54 in accordance with Ref [5] and [6].

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 6 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT If no crack is found during the Fluorescent Penetrant inspection, continue with step 5, otherwise go to §4.2.3

5. Close Up Instructions

a. Install 4 nuts NSA5472-12K7 at holes 47 and 54 LH and RH wing.

b. Torque tighten the nuts as follows:

oPre Mod 10768 - MSN For taper-lok bolts torque tighten the nuts from 2250 lbf.in. to 2750 lbf.in. (25.43

m.daN to 31.07 m.daN).

oPost Mod 10768 - MSN For parallel bolts torque tighten the nuts from 1240 lbf.in. to 1420 lbf.in. (14.0

m.daN to 16.0 m.daN).

Note: MOD 10768 is partially embodied on MSN 00754 but is classed as a post Mod 10768 aircraft.

c. Restore the normal paint finish (Refer to SRM 51-75-10) as applicable.

d. Re-install the Manhole 575AB/675AB.

e. If removed, install in the MLG bay the two flexible hydraulic pipes for MLG actuatingcylinder assembly and install the MLG actuating-cylinder assembly (in accordance with Ref [4]).

4.2.3 FINDINGS - (RC) If a crack is found, contact AIRBUS for further instructions.

4.2.4 SPARES AND TOOLING

- Nut NSA5472-12K7 (Quantity 4)

- Seal Nut P/N 99A57204445000 (Quantity 2) - item can be locally manufactured in accordance with Ref [5] and [6].

- Spanner CHS943 (previously used in Ref [1], [2] and [3]) or a similar standard tool

ALERT OPERATORS TRANSMISSION - AOT AOT ref: A57W017-21 Rev 00 Page 7 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

5. FURTHER INFORMATION

5.1 FOLLOW-UP PLAN This AOT is expected to be mandated by an Airworthiness Directive (AD) published by the Airworthiness Authorities.

The requirement for repeat inspection will be further assessed by Airbus based on the inspection finding rate and root cause analysis. Further updates will be provided via Ref [7].

5.2 IMPACTED DOCUMENTATION No specific documentation is impacted.

6. AOT APPROVAL The technical content of this document is approved under the authority of the EASA DOA approval EASA.21J.031.

7. REPORTING Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on Airbus World, selecting Engineering Domain (Engineering Support) and ATA 57-50.

As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to be addressed to Airbus Customer Services through the generic e-mail address:

inspection.results@airbus.com. Title of the mail with the inspection results shall be “A57W017-21 Rev 00 inspection feedback”.

Best Regards, Christian FREMONT

VICE PRESIDENT ENGINEERING SUPPORT

CUSTOMER SERVICES Pierre-Henri BROUSSE

VICE PRESIDENT PROGRAMME

CUSTOMER SERVICES

Page 8OCROpen in PDF

AIRBUS

ALERT OPERATORS TRANSMISSION - AOT APPENDIX 1 - Inspection Flow Chart PERFORM DVI OF THE GEAR RIB 5

LOWER FLANGE AND WEB FROM THE INBOARD AND OUTBOARD SIDE.

Crack NO

PERFORM FLUORESCENT

PENETRANT INSPECTION OF HOLES 47 AND 54.

Crack

CONTACT AIRBUS FOR NO FURTHER ACTION REQUIRED

FURTHER INSTRUCTIONS REPORT NIL FINDINGS TO AIRBUS AOT ref: A57W017-21 Rev 00 Page 8 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

Page 9OCROpen in PDF

AIRBUS

ALERT OPERATORS TRANSMISSION - AOT APPENDIX 2 - Inspection Report Form OPERATOR: FLIGHT CYCLES / A/C MSN: FLIGHT HOURS:

A/C REGISTRATION: DATE OF INSPECTION:

DETAILED VISUAL INSPECTION RESULT:

Rib Part Number Rib Serial Number CRACK FOUND YES NO

LH WING

RH WING

REAR SPAR , HOLE 43

- HOLE 47

- HOLE 48

- HOLE 49

- HOLE 50

- HOLE 52

- HOLE 54 GEAR RIB 5

MAIN LANDING

GEAR - REAR

BEARING LUGS INBD NOTE: BOLT HOLES TO BE INSPECTED SHOWN THUS • FLUORESCENT PENETRANT INSPECTION PROCEDURE:

L/H WING CRACK FOUND R/H WING CRACK FOUND

YES NO YES NO HOLE 47 HOLE 47 HOLE 54 HOLE 54 AOT ref: A57W017-21 Rev 00 Page 9 of 9 Date: 01-JUL-2021 © AIRBUS S.A.S. 2021. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT