Copy · Astronics SB SB44-9642-01 · 14 pages

© Astronics. Filed by the FAA in regulations.gov docket FAA-2021-0670; AD 2021-17-08 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'b21f1035e806487dd26b8397cc2630989e2b42c0513350eba2ea06a64c8f6dfd'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Proprietary Notice This document and the information disclosed herein are proprietary data of Astronics. Neither this document nor the information contained within shall be used, reproduced, or disclosed to others without the written authorization of Astronics.

SERVICE BULLETIN

VVIASAT IFC INSTALLATION BBOEING 737 SERIES AIRCRAFT

Document No: SSB44--99642--001 Revision: --

THIS DOCUMENT HAS BEEN ELECTRONICALLY SIGNED IN ASTRONICS CSC’S PLM SYSTEM. ALL ELECTRONIC SIGNATURES ARE ON FILE IN THE PLM SYSTEM AND ARE FULLY AUDITABLE.

Document Control RELEASED

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 2 / 14 2 / 14

TTABLE OF CONTENTS

1 GENERAL INFORMATION3

1.1 PURPOSE OF THIS SERVICE BULLETIN3

1.2 HIGH LEVEL DESCRIPTION3

1.3 EFFECTIVITY3

1.4 APPROVAL AND LINKS TO OTHER DOCUMENTS3

1.5 PREREQUISITE4

1.6 WEIGHT AND BALANCE EFFECTS4

1.7 ELECTRICAL LOAD EFFECTS4

1.8 PUBLICATIONS AFFECTED5

2 MATERIAL AND TOOLING INFORMATION6

2.1 INSTALLATION KIT6

2.2 MATERIAL PROVIDED BY THE INSTALLER AND CONSUMABLE ITEMS6

2.3 TOOLING6

3 ACCOMPLISHMENT INSTRUCTIONS7

3.1 PREPARATION7

3.2 MODIFICATION7

3.2.1 SIDE FITTING MODIFICATION7

3.3 INSPECTION8

3.4 CLOSE UP14

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 3 / 14 3 / 14

HISTORY OF REVISIONS

Revision Reason for Revision Date Issued by Approved by

- Initial Release per ECO-0947 8 JUL 2021 S. Trotter M. Margolis

1 GENERAL INFORMATION

1.1 PURPOSE OF THIS SERVICE BULLETIN This Service Bulletin describes the rep lacement and reinstallation of eight side fitting assy’s and any necessary inspections to be conducted.

1.2 HIGH LEVEL DESCRIPTION The modification will consist of removing the existing 8X AR240-1949-01 side fitting as sy and reinstalling 8X new side fitting assemblies while updating the bolt stack up used to attach to the si de fitting assy. This Service Bulletin also calls for several inspections of the aircraft and mo dification structure in the area of the antenna and Radome installation.

1.3 EFFECTIVITY MSN Model 35485, 35486, 35487 B737-800 41552, 41553, 41554, 41555, 41556, 41557, 41558, 41559 B737-900ER

1.4 APPROVAL AND LINKS TO OTHER DOCUMENTS This Engineering Order is approved under FAA STC ST0409 6CH as listed on the latest approved revision of Master Data List (MDL) DC104-9642-00. Proof of latest MDL and SB approval must be obtained from the STC holder, Astronics Armstrong Aerospace (now operating under Astronics CSC).

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 4 / 14 4 / 14

1.5 PREREQUISITE N/A

1.6 WEIGHT AND BALANCE EFFECTS N/A

1.7 ELECTRICAL LOAD EFFECTS N/A

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 5 / 14 5 / 14

1.8 PUBLICATIONS AFFECTED This section indicates which publications are impacted by the present modification. Not all of the modified publications are included in the installation data package, as some of them may require update by the Operator.

This list is for reference only and is not useful for installation purposes, In case of need please refer to the Master Data List of this Engineering Order to determine the exact reference and revision level of the document.

Aircraft Maintenance Manual Yes Illustrated Parts Catalog Yes Wiring Diagram Manual No Electrical Load Analysis No Weight and Balance Manual No

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 6 / 14 6 / 14

2 MATERIAL AND TOOLING INFORMATION

2.1 INSTALLATION KIT The present Service Bulletin requires the following Installation kit:

SB CONFIG Description P/N Qty per A/C SB44-9642-01 SIDE FITTING ASSY AR240-1949-01 8 BOLT, HX, 3/8-24 X 1.828, CPS NAS6606D20 8 NUT, SLF LK, 3/8, CPS MS14144L6 8 COTTER PIN MS24665-285 8 WASHER NAS1149F0632P 16 BOLT, HX, 10-32 X .783, .438 GRP, CRES NAS6703-7 32

GENERAL NOTES

1. Parts will be bagged and tagged in the following order:

a. Individual parts will be bagged and tagged by part number

b. Top Level Kit will be bagged and tagged with Top Level Kit number and any other necessary reference per customer request.

2.2 MATERIAL PROVIDED BY THE INSTALLER AND CONSUMABLE ITEMS Description P/N Qty per A/C CETYL ALCOHOL MIL-L-87132 AR SEALANT BMS 5-95 AR

2.3 TOOLING N/A

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 7 / 14 7 / 14

3 ACCOMPLISHMENT INSTRUCTIONS

3.1 PREPARATION

1. Put access platforms in position as required.

2. Gain access to upper external skin between frames 727E-727H and stringer S3L-S3R.

3. Remove radome which was installed per DG234-9642-08. Reference AMM task 44-00-01-020-801.

3.2 MODIFICATION

3.2.1 SIDE FITTING MODIFICATION Note: Retrieve corresponding installation sub-kit from Astronics CSC installation kit SB44-9642-01.

4. At STA 727E between S2L-S3L, external to the fuselage skin, remove and discard bolt NAS6706-19 and nut MS21043-6 attaching AR240-1949-01 SIDE FITTING ASSY and AR270-1943-01 FWD TEE ASSY.

5. Repeat the previous step 7 additional times removing and discarding bolts NAS 6706-19 and nuts MS21043-6 above STA 727E, 727F, 727G, and 727H on both the LH and RH sides of the aircraft.

6. Remove the pre-existing 32X NAS6703-7 bolts attaching the 8X AR240-1949-01 SIDE FITTING ASSY.

7. Remove the pre-existing 8X AR240-1949-01 SIDE FITTING ASSY.

8. Perform the inspections detailed in section 3.3 of this service bulletin prior to any re-installation efforts.

9. Install a new AR240-1949-01 SIDE FITTING ASSY in the same pos ition and orientation as the previous SIDE FITTING ASSY were installed in at all 8X locations. Fay seal each SIDE FITTING ASSY using BMS 5-95 sealant and install using new NAS6703- 7 bolts qty 4X at each location. NAS6703-7 bolts to be installed wet with BMS 5-95 sealant and torqued to 25-35 in-lbs.

10. At each of the 8 SIDE FITTING ASSY locations, reattach the ne w SIDE FITTING ASSY to the pre-existing TEE ASSY’s using 1X NAS6706D20 bolt, 1X MS14144L6 nut, 2X NAS1149F0632P washer, and 1X MS24665-285 cotter pin per location. Lubricate NAS6706D20 bolts using cetyl alcohol and torque to no more than 15 in-lbs. to align cotter pin.

11. Re-install the radome per original installation drawing DG234-9642-08. Reference AMM task 44-00-01-420-801.

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 8 / 14 8 / 14

3.3 INSPECTION

12. Reference Figure 1 for an aircraft level view of the installation.

Antenna Installation Overview Figure 1 NOTE: 737-900ER Installation Shown

13. The following inspections are graphically represented in this section:

Inspection Figure External Doubler 2 Feed-Through Doubler 3 Intercostals 4 Frames 5, 6 Skin 7

Inspection Detail Table 1

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 9 / 14 9 / 14

14. Inspection Method 1 – External Doubler Inspection

External Doubler Inspection Locations (From Outside of Aircraft Looking Down with Antenna, Radome and Adapter Ring Removed) Figure 2

Inspection:

Perform External LFEC inspection of the skin at the alteration installation area, doubler fastener holes in the first two rows of attachments between the doubler and fuselage skin, and fastener and connector hole locations per 737 Non-Destructive Test Manual Part 6, Procedure 51-00-26, (LFEC). Additionally, perform LFEC at the external doublers between fasteners at the area common to the stringers and at the area common to the frame tees.

Page 10OCROpen in PDF

ASTRONICS CONNECTIVITY SYSTEMS & CERTIFICATION SERVICE BULLETIN VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT REF. SB44-9642-01 REV.

15. Inspection Method 2 - Feed-Through Doubler Inspection STA 727H

2.06 ÷.10 BL

0.00

2.00 ‡.10 Feed-Through Doubler Inspection Locations (From Outside of Aircraft Looking Down, Internal Nutplates Shown for Reference Only) Figure 3 Inspection:

Perform External LFEC inspection of the skin at the alteration installation area, doubler fastener holes in the first two rows of attachments between the doubler and fuselage skin, and fastener and connector hole locations per 737 Non-Destructive Test Manual Part 6, Procedure 51-00-26, (LFEC).

© Astronics Page: 10 / 14

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 11 / 14 11 / 14

16. Inspection Method 3 – Intercostal Inspection

Intercostal Inspection Locations (From Inside of Aircraft Looking Up through Fuselage Skin) Figure 4

Inspection:

Perform Internal HFEC inspection of the intercostal at the fastener locations per 737 Non-Destructive Test Manual Part 6, Procedure 51-00-00, Procedure 4 (HFEC).

VIASAT IFC INSTALLATION, BOEING 737 SERIES AIRCRAFT

SERVICE BULLETIN REF. SB44-9642-01 REV. -

© Astronics © Astronics Page:

Page: 12 / 14 12 / 14

17. Inspection Method 4 – Frame Inspection

Frame Inspection Locations (From Inside of Aircraft Looking Up through Fuselage Skin) Figure 5

Inspection:

Perform internal detailed visual inspection of the frames between stringers 3L and 3R as shown in Figure 5.

Per 737 Non-Destructive Test Manual Part 6, Procedure 51 -00-00, Procedure 4 perform internal HFEC inspection of the frames in the area of added frame segments as shown in Figure 6. NOTE: A typical frame segment for frames 727F, 727G, and 727H is shown in Figure 6. The inspection is to be performed for all eight (8) instances of the frame segments.

Typical Frame Segment Inspection Location Figure 6

Pages 13–14 of 14