TextOCR
This text is OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '401770403398f69ef60470b3e0606d9bdb4f6fe686563b7fb34cebbd741f01c0' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '401770403398f69ef60470b3e0606d9bdb4f6fe686563b7fb34cebbd741f01c0' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
BAE SYSTEMS (Operations) Limited, Prestwick International Airport, Ayrshire, KA9 2RW, Scotland.
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A TITLE: AUTOPILOT - BAe 146 AUTOPILOT DISCONNECT VIA ELECTRIC PITCH
TRIM SWITCH
1.Planning information A.Effectivity
(1) Aircraft Aircraft affected by this modification are defined below:- All BAe 146 100, 200, 300, 301 Series Check the aircraft technical records for embodiment of this modification and those listed above before actioning this Service Bulletin (SB).
(2) Spares Not applicable.
B. Reason To make sure the Autopilot disengages when the Electric Trim Switches are operated and a SYNC button is not held in.
C.Description Introduces a change to the BAe 146 autopilot engagement circuit (achieved through aircraft wiring changes) to make sure that if the autopilot is engaged, operation of either pilot's control column electric pitch trim switch without a SYNC button held in, will cause the autopilot to disconnect.
Modification of aircraft Kit SB22-072a01. All aircraft listed/defined (Ref.para.1.A.(1)) Work comprises:- Perform pre-rewiring testing of the pitch trim system.
- At roof panel, reroute wires for the essential services and hydraulic panels.
Replace module block and delete/reroute associated wires to autopilot junction box.
Add relay, label and associated wires to avionic relay box.
Add wires between autopilot junction box and avionic relay box.
Conduct post rewiring testing.
Closing up.
Date: 14-SEP-2021 SB. 22-072-36262A Revision: Initial issue Page 1 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
- Amending aircraft records.
- Informing BAE Systems of SB embodiment.
D. Compliance Optional.
E. Approval The technical content of this document is approved under the authority of the DOA Ref.UK.21J.0047.
The technical content of this document is approved under the authority of the UK CAA design organisation approval reference:
AD/ 1852/05.
F. Manpower Man-hours per aircraft Kit SB22-072a01 Preparation 12 Modification 95 Test 15 close up 8 Total man-hours 130 This man-hour estimate does not include sealant cure time or paint drying time.
G.Materials - Cost and Availability Cost and Availability is by arrangement between the Operator and BAE Systems.
H.Tooling - Cost and Availability Not applicable.
I.weight and Balance Table 1.
Aircraft Weight Moment BAe 146-100 +0.44 lb +0.2 kg - 10.6 lbft -1.46 kgm Date: 14-SEP-2021 SB. 22-072-36262A Revision: Initial issue Page 2 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A Aircraft Weight Moment BAe 146-200 +0.44 lb +0.2 kg -12.2 lbft -1.68 kgm BAe 146-300 +0.44 lb +0.2 kg - 14.1 lbft -1.95 kgm J. References Aircraft Maintenance Manual, AMM Chapter 12-10-24, 22-10-00.
ISL2207201, Issue 4.
Wiring Manual, WM Chapter 91-00-01.
K.Publications Affected Aircraft Maintenance Manual Illustrated Parts Catalogue Flight Crew Operating Manual Wiring Manual L.Electrical Load Data Not applicable.
M.Software Accomplishment Summary Not applicable.
N.Aircraft Noise Levels Not applicable.
Date: 14-SEP-2021 SB. 22-072-36262A Revision: Initial issue Page 3 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A This Page Is Intentionally Left Blank.
Date: 14-SEP-2021 SB. 22-072-36262A Revision: Initial issue Page 4 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
2.Accomplishment Instructions A.General
(1) The following abbreviations are used within this document:-
- AMM (Aircraft Maintenance Manual).
assy. (assembly).
DOI (Design Office Instruction)
i.a.w. (in accordance with).
ISL (In Service Loom).
- No. (number).
- p/n (part number).
- Qty. (Quantity).
SB (Service Bulletin).
- WM (Wiring Manual).
(2) Observe all WARNINGS and CAUTIONS appearing in the AMM.
(3) Remove and discard wire bundle ties, as necessary.
(4) For cable routing details refer to WM 91-00-01.
(5) Due to varying modification states of aircraft, spare wires coded MZ may already be installed in some Raychem connectors or bungs. If a spare wire is installed in a location used by this SB, it should be removed.
(6) Where new cable routes can touch adjacent structure using light finger pressure:-
(a) Apply panel edge protection (S1221***).
or
(b) Apply Scotch No.69 Glass Cloth insulation tape to cable assy.
(7) Where wiring is to bypass MTC connectors refer to WM 91-00-01.
(8) Where new wiring is added to existing cable routes, wiring must be secured as existing installation. If routing to new equipment or bypassing production breaks and a minimum clipping distance of 20.0 in. (508 mm.) cannot be achieved, it is the responsibility of installer to inform BAE Systems.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 5 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A B.Preparation
(1) Refer to AMM Chapter 22-10-00. Section G. Pitch Trim Checks.
(2) Complete Pitch Trim Checks i.a.w. AMM Chapter 22-10-00. and confirm satisfactory operation of the Pitch Trim system.
(3) Refer to AMM Chapter 12-10-24. Remove all aircraft electrical power.
(4) Display a warning notice in the flight compartment 'DO NOT APPLY POWER TO THE AIRCRAFT'.
C. Modification Kit SB22-072a01. All aircraft listed/defined (Ref.para.1.A.(1)).
At 211-50-20 (Roof Panel - Essential Services and Hydraulics Panel)
(1) With reference to (Drawing 3 and ISL2207201).
(a) Reroute wire as shown.
At 132-26-00 (Autopilot Junction Box)
(2) With reference to Drawing 1, Drawing 2, Drawing 4, Drawing 5, Drawing 6, Drawing 7 and ISL2207201.
(a) Replace Module Block G2 (p/n S3406157) and add Module Block E7 and E8 (p/n S3406901 two positions) and delete/reroute wires as shown.
At 131-10-00 (Avionics Relay Box)
(3) With reference to ISL2207201, Drawing 1, Drawing 2 and Drawing 8 or Drawing 9.
(a) Add Relay CA46 (p/n S2708001), label A/P DISC CA46 (SL5102B0614A) and wires as shown.
Between 131-10-00 (Avionics Relay Box) and 132-26-00 (Autopilot Junction Box)
(4) With reference to Drawing 8 or Drawing 9 and ISL2207201.
(a) Add new wires as shown.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 6 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A D. Test Refer to AMM 22-10-00, Functional Test of autopilot and yar damper, in particular section G. Pitch Trim Checks.
NOTE: Before engaging the autopilot, the elevator trim wheel is to be moved to its mid position, the control column is to be in the neutral position, and the aileron control wheel is to be centralized. If a control moves onto its stops, the autopilot is to be disengaged, the control re-centralized, and the autopilot re-engaged.
Pitch Trim Checks (Mod.36262A)
ACTION RESULT
(1) Make sure flap system is inhibited. Set the flap selector lever to UP position.
(2) On the autopilot controller, press and release the AP engage button.
(3) Restrain either control column and, on autopilot controller, press PITCH switch to UP and hold.
(4) On autopilot controller, press PITCH switch to DOWN and hold.
(5) Release PITCH switch and control column.
- Autopilot engages.
- After a few seconds, on panel 211-21-01 and 212-21-01, EL TRIM annunciators come on.
- On panels 211-21-01 and 212-21-01:
- EL TRIM annunciators go off.
- After a few seconds, EL TRIM annunciators come on again.
- On panels 211-21-01 and 212-21-01, EL TRIM annunciators go off.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 7 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
ACTION RESULT
(6) Pull and hold either - On centre console, elevator trim control column rearwards. wheel rotates nose down.
- On autopilot controller, ELEV trim pointer rotates clockwise.
(7) Centralize the control - Elevator trim wheel stops.
column.
- On panels 211-21-01 and 212-21-01, amber EL TRIM annunciators go off.
(8) On Captain's aileron - Elevator trim wheel rotates nose control wheel, press and up. (Autopilot remains engaged) hold the SYNC button.
Set trim switch to nose up -
(9) On Captain's aileron - Elevator trim wheel rotates nose control wheel, press and down. (Autopilot remains hold the SYNC button. engaged) Set trim switch to nose down.
(10) Whilst operating the trim - The autopilot disengages *.
switch, release the SYNC button.
NOTE: * AP disconnect indications:-
- continuous audio warning (cavalry charge).
- visual warning (red AP legend) on each mode annunciator panel.
- Cancel the warning by pressing an AP DISC button.
- NOTE: After the AP Disconnect, Electric Trim will be active, so the trim wheel will rotate in response to trim switch operation.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 8 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
ACTION RESULT
(11) On the autopilot - Autopilot engages.
controller, press and release the AP engage button.
(12) On First Officer's - Elevator trim wheel rotates nose aileron control wheel, up. (Autopilot remains engaged) press and hold the SYNC button.
Set trim switch to nose up -
(13) On First Officer's aileron control wheel, press and hold the SYNC button.
Set trim switch to nose down.
- Elevator trim wheel rotates nose down. (Autopilot remains engaged)
(14) Whilst operating the trim - The autopilot disengages *.
switch, release the SYNC button.
NOTE: * AP disconnect indications:- continuous audio warning (cavalry charge).
- visual warning (red AP legend) on each mode annunciator panel.
- Cancel the warning by pressing an AP DISC button.
- NOTE: After the AP Disconnect, Electric Trim will be active, so the trim wheel will rotate in response to trim switch operation.
(15) On Captain's aileron - Elevator trim wheel does not control wheel, separately run.
operate each trim switch HALF in nose up and nose down direction.
Date: 14-SEP-2021 SB. 22-072-36262A Revision: Initial issue Page 9 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
ACTION RESULT
(16) On First Officer's - Elevator trim wheel does not aileron control wheel, run.
separately operate each trim switch HALF in nose up and nose down direction.
(17) On Captain's aileron control wheel, set trim switch (both halves of switch) to nose up or nose down.
(18) Set the flap selector lever to 24 degrees position.
(19) On First Officer's aileron control wheel, set trim switch to nose up or nose down.
(20) On the autopilot controller, press and release the AP engage button.
- Elevator trim wheel rotates.
- Elevator trim wheel rotates.
- Autopilot engages.
(21) On Captain's aileron control wheel, separately operate each trim switch HALF in nose up, then nose down direction.
Each half of the split switch causes the autopilot to disengage (with continuous audio/visual warning).
NOTE: To complete this test, engage the autopilot via the controller AP Engage button as necessary.
(22) Engage autopilot using - Autopilot is engaged.
the autopilot controller AP Engage button.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 10 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
ACTION RESULT
(23) On First Officer's - Each half of the split switch aileron control wheel, causes the autopilot to separately operate each disengage (with continuous trim switch HALF in nose audio/visual warning).
up. then nose down direction.
NOTE: To complete this test, engage the autopilot via the controller AP Engage button as necessary.
(24) Engage autopilot using - Autopilot is engaged.
the autopilot controller AP Engage button.
(25) On Captain's aileron control wheel, set trim switch (both halves of switch) to nose up or nose down.
- The autopilot disengages (with continuous audio/visual warning).
NOTE: After the AP Disconnect, Electric Trim will be active, so the trim wheel will be rotate in response to trim switch operation.
(26) Engage autopilot using - Autopilot is engaged.
the autopilot controller AP Engage button.
(27) On First Officer's aileron control wheel, set trim switch (both halves of switch) to nose up or nose down.
- The autopilot disengages (with continuous audio/visual warning).
NOTE: After the AP Disconnect, Electric Trim will be active, so the trim wheel will be rotate in response to trim switch operation.
(28) On Captain's or First - Elevator trim wheel rotates.
Officer's aileron control wheel, set trim switch to nose up or nose down.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 11 of 28 Printed in England
BAE SYSTEMS
MODIFICATION SERVICE BULLETIN BAe 146 SERIES/AVRO 146-RJ SERIES AIRCRAFT MOD. HCM36262A
ACTION RESULT
(29) On panel 211-50-30, open - Elevator trim wheel stops.
circuit breaker ELEV TRIM MOTOR (grid ref. F8).
(30) Close circuit breaker - Elevator trim wheel rotates.
ELEV TRIM MOTOR.
E. Close Up
(1) Make sure work area is clean, and clear of tools and miscellaneous equipment.
(2) Remove the warning notice in the flight compartment 'DO NOT APPLY POWER TO THE AIRCRAFT'.
F. Documentation
(1) Record, in aircraft technical records, embodiment and removal of modification(s) detailed on Advice Note attached to this SB _ On receipt of Advice Note, relevant modification records will be updated to provide required manual revisions and correct spares allocation.
NOTE: The manuals listed (Ref.para.1.K) are affected by embodiment of this SB. BAE Systems cannot update the affected manuals until the Advice Note is received.
Failure to return the Advice Note will result in inappropriate data being retained in the manuals.
(2) Complete a copy of Advice Note attached to this SB and return by mail.
OR Return all required Advice Note details via e-mail.
Date: 14-SEP-2021 SB.22-072-36262A Revision: Initial issue Page 12 of 28 Printed in England