TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd2179ce386cf49c9f9617e38d65e69a6b4c3ff842f0d88ecb5bd6afa83b98251' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'd2179ce386cf49c9f9617e38d65e69a6b4c3ff842f0d88ecb5bd6afa83b98251' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
412CF-20-67 Page 1 of 4 Approved for public release.
ALERT SERVICE BULLETIN 412CF-20-67 15 April 2020
MODEL AFFECTED: 412CF
SUBJECT: TAILBOOM LEFT HAND FIN SPAR CAP P/N 212 - 030-447-117, INSPECTION OF.
HELICOPTERS AFFECTED: Serial Numbers 46400 through 46499
COMPLIANCE: Within the next 100 flight hours or 90 days whichever occurs first after the release date of this bulletin and every 100 flight hours thereafter.
DESCRIPTION:
Bell has received a report of a fractured fin spar cap P/N 212 -030-447-117. The crack occurred at vertical fin station (F.S.) 71 through the first rivet hole attaching the skin 212-030-099-105 to the spar cap. If undetected, the fin spar cap cracking may lead to additional structural damage. This bulletin introduces a 100 flight-hour inspection of the affected area of the fin spar cap using 10X magnifying glass.
Applicability of this bulletin to any spare part shall be determined prior to its installation on an affected helicopter.
APPROVAL:
The engineering design aspects of this bulletin are FAA approved.
CONTACT INFO:
For any questions regarding this bulletin, please contact:
Bell Product Support Engineering Tel: 1-450-437-2862 / 1-800-363-8023 / productsupport@bellflight.com
412CF-20-67 Page 2 of 4 Approved for public release.
MANPOWER:
Approximately 1 man-hour is required to complete this bulletin. This estimate is based on hands-on time and may vary with personnel and facilities available.
WARRANTY:
There is no warranty credit applicable for parts or labor associated with this bulletin.
MATERIAL:
Required Material:
None required.
Consumable Material:
None required.
SPECIAL TOOLS:
None required.
WEIGHT AND BALANCE:
Not affected.
ELECTRICAL LOAD DATA:
Not affected.
REFERENCES:
No reference.
PUBLICATIONS AFFECTED:
C-12-146-000/MF-001, Maintenance Manual.
412CF-20-67 Page 3 of 4 Approved for public release.
ACCOMPLISHMENT INSTRUCTIONS:
1. Prepare the helicopter for maintenance.
2. Gain access to the spar cap angle by removing the 42 -degree gearbox cover and opening the vertical fin driveshaft cover.
3. Clean exposed surfaces of spar cap to facilitate inspection.
4. Inspect both flanges of the spar cap between F.S. 50 and F.S. 71 using 10x magnifying glass and a bright light for cracks, loose rivets and other damage (Figure
1).
5. Inspect the exterior of the fin skin in the area in contact with the spar cap for cracks, loose rivets and/or distortion.
6. If no cracks or other damage is found, close the driveshaft cover, reinstall the 42 - degree gearbox cover and return the helicopter to service.
7. If a crack or other damage is found, contact Product Support Engineering before further flight:
Bell Product Support Engineering Tel: 1-450-437-2862 / 1-800-363-8023 / productsupport@bellflight.com
8. Make an entry in the helicopter logbook and historical service records indicating findings and compliance with this Alert Service Bulletin.
SEE DETAIL A 50 IN. (1270 mm) FIN STA 50 Area to be inspected with 10X power magnafying glass _ FIN STA 71
INSPECT THESE AREAS
• HINGE
INSPECT
THIS AREA
DETAIL A SPAR CAP — SKIN (PARTS OMITTED FOR CLARITY) 19898_001 Figure 1. Spar cap inspection.
412CF-20-67 Page 4 of 4 Approved for public release.