TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'aba11c1733834a62715c188a70b5ed085ba4e21f0328e26f77277db1c95f75b3' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'aba11c1733834a62715c188a70b5ed085ba4e21f0328e26f77277db1c95f75b3' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 737 Requirements Bulletin ALERT Number: 737-27A1312 RB Original Issue: June 04, 2019 ATA System: 2781 SUBJECT: FLIGHT CONTROLS - Leading Edge Flap and Slat Control System Main Slat Track Assembly Inspection and Replacement Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.
9E991ECCN:
Copyright © 2019 Boeing.
Unpublished Work. All Rights Reserved.
Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.
Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.
Original Issue: June 04, 2019 737-27A1312 RB 1 of 66
5.0
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 2 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
BLANK PAGE
Table of Contents
1 . E F F E C T I V I T Y5
A. Airplanes5
B . S p a r e s A f f e c t e d6
2. CONCURRENT REQUIREMENTS6
3 . C O M P L I A N C E6
4. APPROVAL ................................................ 1 3
5. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 5 A. General Information ......................................... 1 5 B. Work Instructions ........................................... 1 6 FIGURE 1: LEFT WING MAIN SLAT TRACK ASSEMBLIES - INSPECTION [Gro u p 1 , 3 ] ....... 2 5 FIGURE 2: RIGHT WING MAIN SLAT TRACK ASSEMBLIES - INSPECTION [Gr oup 1, 3] ...... 2 9 FIGURE 3: LEFT WING MAIN SLAT TRACK ASSEMBLIES - INSPECTION [Gro u p 2 , 4 ] ....... 3 3 FIGURE 4: RIGHT WING MAIN SLAT TRACK ASSEMBLIES - INSPECTION [Gr oup 2, 4] ...... 3 8 FIGURE 5: LEFT WING MAIN SLAT TRACK ASSEMBLIES - REPLACEMENT [Gr o u p 1 , 3 ] ..... 4 3 FIGURE 6: RIGHT WING MAIN SLAT TRACK ASSEMBLIES - REPLACEMENT [G roup 1, 3] ..... 4 7 FIGURE 7: LEFT WING MAIN SLAT TRACK ASSEMBLIES - REPLACEMENT [Gr o u p 2 , 4 ] ..... 5 1 FIGURE 8: RIGHT WING MAIN SLAT TRACK ASSEMBLIES - REPLACEMENT [G roup 2, 4] ..... 5 6 FIGURE 9: INSPECTION REPORTING FORM .............................. 6 1 FIGURE 10: SUSPECT MAIN SLAT TRACK ASSEMBLY RETURN FORM AND INST RUCTIONS . . . 63 APPENDIX A: PART STAMP INFORMATION ................................ 6 4 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 3 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 4 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
BLANK PAGE
Commercial Airplanes 737 Requirements Bulletin ALERT Number: 737-27A1312 RB Original Issue: June 04, 2019 ATA System: 2781 SUBJECT: FLIGHT CONTROLS - Leading Edge Flap and Slat Control System Main Slat Track Assembly Inspection and Replacement
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING
PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.
1. EFFECTIVITY A. Airplanes This bulletin is applicable to 737-700C, 737-800, 737-900ER Airplane(s), line number(s) 7094, 7097, 7099, 7101-7102, 7104, 7106-7107, 7109, 7112, 7116-7117, 7119, 7121-7122, 7124, 7126-7127, 7129, 7131, 7134, 7136-7137, 7139, 7141-7142, 7146, 7149, 7151, 7154, 7156-7157, 7159, 7161-7162, 7164, 7167, 7169, 7171-7172, 7174, 7176-7177, 7179, 7182, 7187, 7189, 7191, 7194, 7197, 7199, 7202, 7204, 7206, 7209, 7212, 7214, 7217, 7221, 7224, 7227, 7229, 7232, 7234-7235, 7239, 7242, 7244, 7247, 7249, 7251, 7257, 7259, 7262, 7264, 7266, 7269, 7272, 7274, 7277, 7279-7280, 7284, 7287, 7292, 7294, 7299, 7302, 7304, 7307, 7309, 7312, 7314, 7317, 7319, 7322, 7327, 7329, 7332, 7334, 7337, 7339, 7342, 7344, 7347, 7349, 7354, 7357, 7364, 7367, 7369, 7372, 7374, 7379, 7382, 7387, 7397, 7402, 7407, 7412, 7422, 7432, 7437, 7442, 7447, 7452, 7467, 7472, 7477, 7482, 7487, 7492, 7502 in 4 Group(s). Where the effectivity is presented with hyphens between line numbers, the airplane applicability means "through" and "inclusive", e.g. line numbers 1-9 means line numbers 1 through 9 inclusive.
DESCRIPTIONCONFIGURATIONGROUP 737-800 Airplanes with a high probability of delivery with suspect main slat tracks.
- 1 737-900ER Airplanes with a high probability of delivery with suspect main slat tracks.
- 2 737-700C/-800 Airplanes with a low probability of delivery with suspect main slat tracks.
- 3 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 5 of 66
DESCRIPTIONCONFIGURATIONGROUP 737-900ER Airplanes with a low probability of delivery with suspect main slat tracks.
- 4 B. Spares Affected None.
2. CONCURRENT REQUIREMENTS None.
3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to the requirements bulletin. The Airworthiness Directive will make the compliance tasks and times given in the requirements bulletin mandatory.
Accomplish the required action(s), based on the applicable condition(s) in the Tables 1-4, in accordance with the Accomplishment Instructions.
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that CONDITION or OPTION.
Group 1:
Table 1: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Do a maintenance records check for the removal of any main slat track assembly prior to the original issue date of requirements bulletin 737-27A1312 RB.
All Airplanes --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Contact The Boeing Company to inform them of the removed main slat track assembly or assemblies.
CONDITION 1: ANY
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 6 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 1:
Table 1: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition ---No further action for this condition.CONDITION 2: NO
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Inspect the main slat track assemblies for a suspect lot number.
All Airplanes --Within 3 days after accomplishing the inspection.
Report all inspection results to The Boeing Company.
CONDITION 3: NO
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS-
PECT LOT NUMBER --Before further flight.
CONDITION 4 (ACTION 1): Remove all main slat track assemblies with a suspect lot number and install serviceable main slat track assembly or assemblies.
CONDITION 4: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS- PECT LOT NUMBER --Within 3 days after accomplishing the inspection.
CONDITION 4 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 4 (ACTION 3): Ship all main slat track assemblies with a suspect lot number to The Boeing Company.
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 7 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 1:
Table 1: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Before further flight.
CONDITION 5 (ACTION 1): Remove all main slat track assemblies which have a suspect lot number that cannot be determined and install serviceable main slat track assembly or assemblies.
CONDITION 5: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WHERE THE
SUSPECT LOT NUM-
BER CANNOT BE DE- TERMINED --Within 3 daysafter accomplishing the inspection.
CONDITION 5 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 5 (ACTION 3): Ship all main slat track assemblies with a suspect lot number that cannot be determined to The Boeing Company.
Group 2:
Table 2: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Do a maintenance records check for the removal of any main slat track assembly prior to the original issue date of 737- 27A1312 RB.
All Airplanes --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Contact The Boeing Company to inform them of the removed main slat track assembly or assemblies.
CONDITION 1: ANY
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB ---No further action for this condition.CONDITION 2: NO
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 8 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 2:
Table 2: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Inspect the main slat track assemblies for a suspect lot number.
All Airplanes --Within 3 days after accomplishing the inspection.
Report all inspection results to The Boeing Company.
CONDITION 3: NO
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS-
PECT LOT NUMBER --Before further flight.
CONDITION 4 (ACTION 1): Remove all main slat track assemblies with a suspect lot number and install serviceable main slat track assembly or assemblies.
CONDITION 4: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS- PECT LOT NUMBER --Within 3 days after accomplishing the inspection.
CONDITION 4 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 4 (ACTION 3): Ship all main slat track assemblies with a suspect lot number to The Boeing Company.
--Before further flight.
CONDITION 5 (ACTION 1): Remove all main slat track assemblies which have a suspect lot number that cannot be determined and install serviceable main slat track assembly or assemblies.
CONDITION 5: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WHERE THE
SUSPECT LOT NUM-
BER CANNOT BE DE- TERMINED --Within 3 daysafter accomplishing the inspection.
CONDITION 5 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 5 (ACTION 3): Ship all main slat track assemblies with a suspect lot number that cannot be determined to The Boeing Company.
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 9 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 3:
Table 3: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Do a maintenance records check for the removal of any main slat track assembly prior to the original issue date of 737- 27A1312 RB.
All Airplanes --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Contact The Boeing Company to inform them of the removed main slat track assembly or assemblies.
CONDITION 1: ANY
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB ---No further action for this condition.CONDITION 2: NO
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Inspect the main slat track assemblies for a suspect lot number.
All Airplanes --Within 3 days after accomplishing the inspection.
Report all inspection results to The Boeing Company.
CONDITION 3: NO
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS-
PECT LOT NUMBER Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 10 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 3:
Table 3: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Before further flight.
CONDITION 4 (ACTION 1): Remove all main slat track assemblies with a suspect lot number and install serviceable main slat track assembly or assemblies.
CONDITION 4: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS- PECT LOT NUMBER --Within 3 days after accomplishing the inspection.
CONDITION 4 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 4 (ACTION 3): Ship all main slat track assemblies with a suspect lot number to The Boeing Company.
--Before further flight.
CONDITION 5 (ACTION 1): Remove all main slat track assemblies which have a suspect lot number that cannot be determined and install serviceable main slat track assembly or assemblies.
CONDITION 5: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WHERE THE
SUSPECT LOT NUM-
BER CANNOT BE DE- TERMINED --Within 3 daysafter accomplishing the inspection.
CONDITION 5 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 5 (ACTION 3): Ship all main slat track assemblies with a suspect lot number that cannot be determined to The Boeing Company.
Group 4:
Table 4: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Do a maintenance records check for the removal of any main slat track assembly prior to the original issue date of 737- 27A1312 RB.
All Airplanes Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 11 of 66 REQUIREMENTS BULLETIN 737-27A1312
ALERTALERT
Group 4:
Table 4: Main Slat Track Assembly Inspection NotesRepeat Interval Compliance Time ActionCondition --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Contact The Boeing Company to inform them of the removed main slat track assembly or assemblies.
CONDITION 1: ANY
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB ---No further action for this condition.CONDITION 2: NO
MAIN SLAT TRACK
ASSEMBLY WAS RE-
MOVED PRIOR TO
THE ORIGINAL ISSUE
DATE OF REQUIRE-
MENTS BULLETIN 737-27A1312 RB --Within 10 days after the original issue date of the requirements bulletin 737-27A1312 RB.
Inspect the main slat track assemblies for a suspect lot number.
All Airplanes --Within 3 days after accomplishing the inspection.
Report all inspection results to The Boeing Company.
CONDITION 3: NO
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS-
PECT LOT NUMBER --Before further flight.
CONDITION 4 (ACTION 1): Remove all main slat track assemblies with a suspect lot number and install serviceable main slat track assembly or assemblies.
CONDITION 4: ANY
MAIN SLAT TRACK
ASSEMBLY WAS
FOUND WITH A SUS- PECT LOT NUMBER --Within 3 days after accomplishing the inspection.
CONDITION 4 (ACTION 2): Report all inspection results to The Boeing Company.
--Within 30 days after removal from the airplane.
CONDITION 4 (ACTION 3): Ship all main slat track assemblies with a suspect lot number to The Boeing Company.
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: June 04, 2019 737-27A1312 RB 12 of 66 REQUIREMENTS BULLETIN 737-27A1312