TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '52fbfb3fda4e4c347b5ca91bc4fcc4d94903425cdc50ac19a0270dda1befac41' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '52fbfb3fda4e4c347b5ca91bc4fcc4d94903425cdc50ac19a0270dda1befac41' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
REQUIREMENTS BULLETIN 737-27A1330
ALERT ALERT FWD
PARTS REMOVED
FOR CLARITY
PARTS REMOVED
FOR CLARITY 3035232 FIGURE 4: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- NUT TORQUE CHECK (SHEET 2 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 37 of 46
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a)6BACN10YR4CDNUT, SELF-LOCKINGTorque1
(a)6BACN10YR4CDNUT, SELF-LOCKINGTorque2
(a) Using a dial torque wrench, apply torque gradually to the nut until the nut rotates or up to 63 in-lb of torque.
If the nut rotates before 63 in-lb, the nut is under-torqued. If torque is at 63 in-lb or greater, then the nut has passed the torque check.
FIGURE 4: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- NUT TORQUE CHECK (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 38 of 46 REQUIREMENTS BULLETIN 737-27A1330
ALERTALERT
REQUIREMENTS BULLETIN 737-27A1330
ALERT ALERT
JACKSCREW
FITTING
- JACKSCREW
• JACKSCREW
GEARBOX
STABILIZER
TRIM MOTOR
HORIZONTAL STABILIZER
TRIM ACTUATOR FWD
STA CABLE
STB CABLE 3035233 FIGURE 5: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER REMOVAL (SHEET 1 OF 4) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 39 of 46
REQUIREMENTS BULLETIN 737-27A1330
ALERT ALERT FWD
PARTS REMOVED
FOR CLARITY
PARTS REMOVED
FOR CLARITY 3035235 FIGURE 5: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER REMOVAL (SHEET 2 OF 4) Original Issue: October 07, 2024 737-27A1330 RB Export Controlled ECCN: 9E991 See page 1 for details 40 of 46
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
ONLY ONE FASTENER LOCATION CAN BE REMOVED AT A TIME.
CAUTION More DataQtyIdentificationNameTaskStep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove1
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove2
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove3
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove4
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove5
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove6
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep FIGURE 5: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER REMOVAL (SHEET 3 OF 4) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 41 of 46 REQUIREMENTS BULLETIN 737-27A1330
ALERTALERT
More DataQtyIdentificationNameTaskStep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove7
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove8
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove9
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove10
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove11
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a)(b)1BACN10YR4CDNUT, SELF-LOCKINGRemove12
(a)(b)(c)1BACW10BN4APWASHERRemove / Keep
(b)(c)(d)1BACW10BN4ACWASHERRemove / Keep
(b)(c)(d)1BACB30NR4K12BOLT, HEX HEADRemove / Keep
(a) This step is only necessary if the nut at this location needs to be removed.
(b) Use the applicable step in this figure for the location of each under-torqued nut that was found. Do the work necessary in this figure and the subsequent actions at each location one at a time to maintain clampup of the lower gimbal assembly.
(c) Discard if damaged.
(d) This step is only necessary if the fastener at this location needs to be removed.
FIGURE 5: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER REMOVAL (SHEET 4 OF 4) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 42 of 46 REQUIREMENTS BULLETIN 737-27A1330
ALERTALERT
REQUIREMENTS BULLETIN 737-27A1330
ALERT ALERT
JACKSCREW
FITTING
- JACKSCREW
• JACKSCREW
GEARBOX
STABILIZER
TRIM MOTOR
HORIZONTAL STABILIZER
TRIM ACTUATOR FWD
STA CABLE
STB CABLE 3035236 FIGURE 6: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER HOLE INSPECTION (SHEET 1 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 See page 1 for details 737-27A1330 RB 43 of 46
REQUIREMENTS BULLETIN 737-27A1330
ALERT ALERT FWD
PARTS REMOVED
FOR CLARITY
PARTS REMOVED
FOR CLARITY AREA TO BE 3035237
INSPECTED FIGURE 6: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER HOLE INSPECTION (SHEET 2 OF 3) Original Issue: October 07, 2024 737-27A1330 RB Export Controlled ECCN: 9E991 See page 1 for details 44 of 46
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
ONLY ONE FASTENER LOCATION CAN BE INSPECTED AT ONE TIME.
CAUTION More DataQtyIdentificationNameTaskStep
(a)(b)(c)-251A4530-2GIMBAL ASSY - STABI-
LIZER TRIM, LOWER Inspect1
(a)(b)(c)-251A4530-2GIMBAL ASSY - STABI-
LIZER TRIM, LOWER Inspect2
(a) Do a General Visual Inspection of the lower gimbal assembly at each fastener location where the nut was removed or missing, for any crack or any corrosion. Refer to 737-600 SRM 51-00-06, 737-700 SRM 51- 00-06, 737-700CONV SRM 51-00-06,737-800 SRM 51-00-06, 737-800BCF SRM 51-00-06, 737-900 SRM 51-00-06 or 737-900ER SRM 51-00-06 as an accepted procedure.
(b) The locations identified are the maximum number of locations that need to be inspected.
(c) Inspect one fastener at a time to maintain clamp-up of the lower gimbal assembly.
FIGURE 6: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR
- LOWER GIMBAL ASSEMBLY FASTENER HOLE INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 45 of 46 REQUIREMENTS BULLETIN 737-27A1330
ALERTALERT
This table is a list of the BCS messages that were sent to operators with inspection requirements and corrective actions.
BCS MessageService Related NumberOperator Code TBC-TBC-22-44993-5481541280TBC TBC-0F0-22-00033-54815462160F0 TBC-P1D-22-00083-5481546096P1D TBC-BRI-22-00143-5481541097BRI TBC-ETH-22-00253-5481531612ETH TBC-SFZ-22-00023-5481540836SFZ TBC-JOY-22-00013-5481513253JOY TBC-AMX-22-00173-5481513425AMX TBC-TLB-22-00083-5481541185TLB TBC-TVF-22-00033-5481513339TVF TBC-KLM-22-00173-5481530778KLM TBC-SCA-22-00033-5481541403SCA TBC-JJU-22-00053-5481545975JJU TBC-RAM-22-00113-5481531305RAM TBC-AAR-22-00023-5481513512AAR TBC-ANA-22-00653-5481540923ANA TBC-TAV-22-00033-5481531039TAV TBC-NSB-22-00103-5481545851NSB TBC-AXE-22-00013-5481540749AXE TBC-YYR-22-00013-5481545736YYR TBC-RYR-22-00323-5481531451RYR TBC-OMR-22-00063-5481541010OMR TBC-VLS-22-00043-5481513138VLS TBC-SHG-22-00073-5481513022SHG TBC-MAS-22-00033-5481531175MAS TBC-SWA-22-00593-5481513642SWA TBC-WJI-22-00273-5481530916WJI APPENDIX A: BOEING PROVIDED INSPECTION REQUIREMENTS AND CORRECTIVE ACTIONS (SHEET 1 OF 1) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 46 of 46 REQUIREMENTS BULLETIN 737-27A1330