Copy · RB737-27A1330 R0 · 46 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2025-0469, the docket of a proposed AD (Federal Register 2025-06274). Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '52fbfb3fda4e4c347b5ca91bc4fcc4d94903425cdc50ac19a0270dda1befac41'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 13–24
Page 25OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

JACKSCREW

FITTING

- JACKSCREW

• JACKSCREW

GEARBOX

STABILIZER

TRIM MOTOR

HORIZONTAL STABILIZER

TRIM ACTUATOR FWD

STA CABLE

STB CABLE 3035181 FIGURE 1: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ATTACHMENT HARDWARE INSPECTION (SHEET 1 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 25 of 46

Page 26OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT FWD

PARTS REMOVED

FOR CLARIT

PARTS REMOVED

FOR CLARITY 3035193 FIGURE 1: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ATTACHMENT HARDWARE INSPECTION (SHEET 2 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 26 of 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)6BACN10YR4CDNUT, SELF-LOCKINGInspect1

(a)6BACW10BN4APWASHERInspect

(a)6BACB30NR4K12BOLT, HEX HEADInspect

(a)6BACW10BN4ACWASHERInspect

(a)6BACN10YR4CDNUT, SELF-LOCKINGInspect2

(a)6BACW10BN4APWASHERInspect

(a)6BACB30NR4K12BOLT, HEX HEADInspect

(a)6BACW10BN4ACWASHERInspect

(a) Do a General Visual Inspection of the 12 fastener locations on the lower gimbal assembly to see if all attachment hardware is installed.

FIGURE 1: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ATTACHMENT HARDWARE INSPECTION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 27 of 46 REQUIREMENTS BULLETIN 737-27A1330

ALERTALERT

Page 28OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

JACKSCREW

FITTING

- JACKSCREW

- JACKSCREW

GEARBOX

STABILIZER

TRIM MOTOR

HORIZONTAL STABILIZER

TRIM ACTUATOR FWD

STA CABLE

STB CABLE 3035323 FIGURE 2: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ADJACENT STRUCTURE INSPECTION FOR CRACKS OR CORROSION (SHEET 1 OF 3) Original Issue: October 07, 2024 737-27A1330 RB Export Controlled ECCN: 9E991 See page 1 for details 28 of 46

Page 29OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

INSPECTION AREA

STABILIZER TRIM ACTUATOR NOT SHOWN 3076027 FIGURE 2: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ADJACENT STRUCTURE INSPECTION FOR CRACKS OR CORROSION (SHEET 2 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 29 of 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep

(a)--FITTINGInspect1

(a) Do a General Visual Inspection of the fitting and associated bushings for any crack and any corrosion.

FIGURE 2: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- ADJACENT STRUCTURE INSPECTION FOR CRACKS OR CORROSION (SHEET 3 OF 3) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 30 of 46 REQUIREMENTS BULLETIN 737-27A1330

ALERTALERT

Page 31OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

JACKSCREW

FITTING

- JACKSCREW

• JACKSCREW

GEARBOX

STABILIZER

TRIM MOTOR

HORIZONTAL STABILIZER

TRIM ACTUATOR FWD

STA CABLE

STB CABLE 3035243 FIGURE 3: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- LOWER GIMBAL ASSEMBLY FASTENER INSTALLATION (SHEET 1 OF 5) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 31 of 46

Page 32OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

BOLT BOLT WASHER VASHE! 7 WASHER WASHER

NUT NUT BOLT WASHER WASHER NUT BOLT WASHER WASHER NUT

PARTS REMOVED

FWD FOR CLARITY BOLT WASHER WASHER NUT \ BOLT WASHER WASHER NUT WASHER 19 BOLT NUT WASHER 15) WASHER BOLT WASHER NUT BOLT WASHER WASHER NUT 7 BOL

J WASHE WASHER NUT

PARTS REMOVED

FOR CLARITY

BOLT BOLT WASHER WASHER WASHER WASHER 3035244

NUT NUT FIGURE 3: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- LOWER GIMBAL ASSEMBLY FASTENER INSTALLATION (SHEET 2 OF 5) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 32 of 46

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.

More DataQtyIdentificationNameTaskStep Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)1

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply2 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)3

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply4 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)5

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply6 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)7

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply8 FIGURE 3: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- LOWER GIMBAL ASSEMBLY FASTENER INSTALLATION (SHEET 3 OF 5) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 33 of 46 REQUIREMENTS BULLETIN 737-27A1330

ALERTALERT

More DataQtyIdentificationNameTaskStep Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)9

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply10 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)11

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply12 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)13

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply14 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)15

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply16 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)17

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply18 FIGURE 3: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- LOWER GIMBAL ASSEMBLY FASTENER INSTALLATION (SHEET 4 OF 5) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 34 of 46 REQUIREMENTS BULLETIN 737-27A1330

ALERTALERT

More DataQtyIdentificationNameTaskStep Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)19

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply20 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)21

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply22 Under the bolt head.

(a)(b) 1BACW10BN4ACWASHERInstall (Kept)23

(a)1BACB30NR4K12BOLT, HEX HEADInstall (Kept) Under the nut. (b)(c)1BACW10BN4APWASHERInstall (Kept)

(c)(d)(e)1BACN10YR4CDNUT, SELF-LOCKINGInstall (New)

(a)(f)-BMS3-38CORROSION INHIBIT-

ING COMPOUND Apply24

(a) This step is only necessary if the fastener at this location is removed.

(b) Install new washer if existing was found missing. Inspect kept washer for damage. Install new washer if kept washer is damaged. Damage is defined as any crack, deformation, or corrosion.

(c) This step is only necessary if the nut at this location is removed.

(d) If tightening the nut, tighten the nut to a torque of 63-67 in-lb. If tightening the fastener head, tighten the fastener head to a torque of 73-77 in-lb.

(e) If new nut does not generate 5 in-lb of torque while installing, the fastener must be replaced. Remove the HSTA as necessary for fastener replacement.

(f) Apply BMS3-38 Corrosion Inhibiting Compound to the protruded bolt end and new nut.

FIGURE 3: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- LOWER GIMBAL ASSEMBLY FASTENER INSTALLATION (SHEET 5 OF 5) Export Controlled ECCN: 9E991 See page 1 for details Original Issue: October 07, 2024 737-27A1330 RB 35 of 46 REQUIREMENTS BULLETIN 737-27A1330

ALERTALERT

Page 36OCROpen in PDF

REQUIREMENTS BULLETIN 737-27A1330

ALERT ALERT

JACKSCREW FITTING

- JACKSCREW

JACKSCREW

GEARBOX

STABILIZER

TRIM MOTOR

HORIZONTAL STABILIZER

TRIM ACTUATOR FWD

STA CABLE

STB CABLE 3035231 FIGURE 4: HORIZONTAL STABILIZER CONTROL SYSTEM - HORIZONTAL STABILIZER TRIM ACTUATOR

- NUT TORQUE CHECK (SHEET 1 OF 3) Original Issue: October 07, 2024 Export Controlled ECCN: 9E991 737-27A1330 RB See page 1 for details 36 of 46

Pages 37–46 of 46