Copy · SB 737-53A1370 RB · 62 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2018-0273; AD 2018-18-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'e54464816d4984738a4557ee87ebfd611055779be2265b691512ebf1e6ad15f4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Commercial Airplanes 737 Requirements Bulletin ALERT Number: 737-53A1370 RB Original Issue: December 13, 2017 ATA System: 5313 5261 SUBJECT: FUSELAGE - Floor Beam - Forward Airstair - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Stop Fitting No. 2, No. 5, and No. 8 - Inspection Export of this technology is controlled under the United States Export Administration Regulations (EAR) (15 CFR 300-774). An export license may be required before it is used for development, production or use by foreign persons from specific countries. The controller of this data has the individual responsibility to abide by all export laws.

9E991ECCN:

Copyright © 2017 Boeing.

Unpublished Work. All Rights Reserved.

Treatment of this document and its content is governed by contract with Boeing. Rights to use this document are licensed on a per aircraft basis and such rights may not be transferable. For more information, contact The Boeing Company.

Boeing, the Boeing signature, the Boeing symbol, 707, 717, 727, 737, 747, 757, 767, 777, 787, Dreamliner, BBJ, DC-8, DC-9, DC-10, KC-10, KC-46, KDC-10, MD-10, MD-11, MD-80, MD-88, MD-90, P-8, Poseidon and Boeing liveries are all trademarks owned by The Boeing Company; and no trademark license is granted in connection with this document unless provided in writing by Boeing.

Original Issue: December 13, 2017 737-53A1370 RB 1 of 62

4.0

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 2 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

BLANK PAGE

Table of Contents

1 . E F F E C T I V I T Y5

A. Airplanes5

B . S p a r e s A f f e c t e d6

2. CONCURRENT REQUIREMENTS6

3 . C O M P L I A N C E6

4. APPROVAL ................................................ 1 0

5. ACCOMPLISHMENT INSTRUCTIONS .................................. 1 1 A. General Information ......................................... 1 1 B. Work Instructions ........................................... 1 2 FIGURE 1: FORWARD AIRSTAIR DOOR CUTOUT - STA 312 FLOOR BEAM - LOWER CHORD - HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION [Group 2] ............. 1 9 FIGURE 2: FORWARD AIRSTAIR DOOR - STOP FITTINGS NO. 2, NO. 5 AND NO. 8 - HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION [Group 2] ..................... 2 2 FIGURE 3: FORWARD AIRSTAIR DOOR CUTOUT - UPPER SILL AND BRACKET - INSPECTION [Group 2, Configuration 1] ....................................... 2 6 FIGURE 4: FORWARD AIRSTAIR DOOR CUTOUT - UPPER SILL AND BRACKET - INSPECTION [Group 2, Configuration 2] ....................................... 3 0 FIGURE 5: FORWARD AIRSTAIR DOOR CUTOUT - UPPER SILL AND BRACKET - INSPECTION [Group 2, Configuration 3] ....................................... 3 4 FIGURE 6: FORWARD AIRSTAIR DOOR CUTOUT - UPPER SILL AND BRACKET - INSPECTION [Group 2, Configuration 4] ....................................... 3 8 FIGURE 7: FORWARD AIRSTAIR DOOR - STOP FITTING NO. 2 - REMOVAL AND INSTALLATION [Group 2 ] ................................................ 4 2 FIGURE 8: FORWARD AIRSTAIR DOOR - STOP FITTING NO. 5 - REMOVAL AND INSTALLATION [Group 2 ] ................................................ 4 7 FIGURE 9: FORWARD AIRSTAIR DOOR - STOP FITTING NO. 8 - REMOVAL AND INSTALLATION [Group 2 ] ................................................ 5 2 APPENDIX A: DOOR ADJUSTMENT INSTRUCTIONS: FORWARD AIRSTAIR DOOR [Group 2] .... 5 7 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 3 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 4 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

BLANK PAGE

Commercial Airplanes 737 Requirements Bulletin ALERT Number: 737-53A1370 RB Original Issue: December 13, 2017 ATA System: 5313 5261 SUBJECT: FUSELAGE - Floor Beam - Forward Airstair - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Stop Fitting No. 2, No. 5, and No. 8 - Inspection

THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. THIS IS AN ENHANCED REQUIRED FOR COMPLIANCE DOCUMENT. THE BOEING

PROCESSES USED TO CREATE THE SERVICE BULLETIN (SB) AND THE REQUIREMENTS BULLETIN (RB) ENSURE THAT THE INFORMATION BETWEEN "RC START" AND "RC END" IN THE SB ARE IDENTICAL TO THE INFORMATION IN THE SAME SECTIONS (COMPLIANCE, WORK INSTRUCTIONS…) OF THE RB WHICH THE SB REFERS TO AS THE RELATED DOCUMENT.

1. EFFECTIVITY A. Airplanes This bulletin is applicable to 737-100, -200, -200C, -300, -400, -500 Airplanes, line numbers 1-3132, with a forward airstair door installed.

DESCRIPTIONCONFIGURATIONGROUP 737-100/-200/-200C Airplanes, line numbers 1-291 with a forward airstair door installed.

-1 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 5 of 62

DESCRIPTIONCONFIGURATIONGROUP 737-200/-200C/-300/-400/-500 Airplanes, line numbers 292-3132 with a forward airstair door installed.

-2 737-200/-200C/-300/-400/-500 Airplanes with no radius filler installed on the bracket at STA 322.7 and with no modification to the upper sill, installed in accordance with Service Bulletin 737-53A1269.

1 737-200/-200C/-300/-400/-500 Airplanes with a radius filler installed on the bracket at STA 322.7 and a modification to the upper sill, installed in accordance with Service Bulletin 737-53A1269.

2 737-200/-200C/-300/-400/-500 Airplanes with a radius filler installed on the bracket at STA 322.7 and with no modification to the upper sill, installed in accordance with Service Bulletin 737-53A1269.

3 737-200/-200C/-300/-400/-500 Airplanes with no radius filler installed on the bracket at STA 322.7 and with a modification to the upper sill, installed in accordance with Service Bulletin 737-53A1269.

4 B. Spares Affected None

2. CONCURRENT REQUIREMENTS None.

3. COMPLIANCE The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Requirements Bulletin 737-53A1370 RB. The Airworthiness Directive will make the compliance tasks and times given in Requirements Bulletin 737-53A1370 RB mandatory.

Accomplish the required actions, based on the applicable conditions in Table 1 and Table 2, in accordance with the Accomplishment Instructions.

When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

Group 1:

Boeing endorses the FAA rules related to Limit of Validity (LOV) and recommends immediate and permanent removal from service of any airplanes upon reaching the LOV, whether or not it is operated under FAA jurisdiction. As such, Boeing no longer provides maintenance instructions for airplanes that have accumulated flight cycles beyond the LOV. Airplanes in Group 1 (line numbers 1-291) have accumulated flight cycles beyond the LOV of the maintenance program. 14 CFR 121.1115 and 129.115 prohibit operation of an airplane beyond its LOV.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 6 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Group 2:

Table 1: Forward Airstair Door Cutout - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Door Stop Fittings No. 2, No. 5 and No. 8 - Initial High Frequency Eddy Current (HFEC) and Detailed Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 4,500 flight cycles after the original issue date of Requirements Bulletin 737-53A1370 RB.

Before 16,000 total flight cycles.

ACTION 1:

Do a HFEC inspection of the STA 312 floor beam lower chord for any crack.

All Airplanes.

-Before further flight.CONDITION 1 (ACTION 1):CONDITION 1: ANY

CRACK FOUND IN THE STA 312 FLOOR BEAM LOWER CHORD.

Contact The Boeing Company for repair instructions and do the repair.

Before further flight.CONDITION 1 (ACTION 2):

Do a detailed inspection of the upper sill common to stop fittings No.

1 and No. 2 and the bracket at stop fitting No. 2 for any crack.

-Before further flight.CONDITION 1.1 (ACTION 1):CONDITION 1.1: ANY

CRACK FOUND IN THE

UPPER SILL COMMON TO STOP FITTING NO. 1 OR NO. 2 OR IN THE

BRACKET AT STOP FIT- TING NO. 2.

Contact The Boeing Company for repair instructions and do the repair.

Before further flight.CONDITION 1.1 (ACTION 2):

Do an adjustment of the forward airstair door. (a) In accordance with Table 2.CONDITION 1.1 (ACTION 3):

Do inspections of the STA 312 floor beam lower chord in accordance with Table 2 .

-Before further flight.CONDITION 1.2 (ACTION 1):CONDITION 1.2: NO

CRACK FOUND IN THE

UPPER SILL COMMON TO STOP FITTING NO. 1 OR NO. 2 OR IN THE

BRACKET AT STOP FIT- TING NO. 2.

Do an adjustment of the forward airstair door. (a) In accordance with Table 2.CONDITION 1.2 (ACTION 2):

Do inspections of the STA 312 floor beam lower chord in accordance with Table 2.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 7 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Group 2:

Table 1: Forward Airstair Door Cutout - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Door Stop Fittings No. 2, No. 5 and No. 8 - Initial High Frequency Eddy Current (HFEC) and Detailed Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Before further flight.CONDITION 2 (ACTION 1):CONDITION 2: NO

CRACK FOUND IN THE STA 312 FLOOR BEAM LOWER CHORD.

Do an adjustment of the forward airstair door. (a) In accordance with Table 2.CONDITION 2 (ACTION 2):

Do inspections of the STA 312 floor beam lower chord in accordance with Table 2.

-Within 4,500 flight cycles after the original issue date of Requirements Bulletin 737-53A1370 RB.

Before 16,000 total flight cycles.

ACTION 2:

Do a HFEC inspection of stop fittings No. 2, No. 5, and No. 8 on the forward airstair door for any crack.

All Airplanes.

-Before further flight.CONDITION 3 (ACTION 1):CONDITION 3: ANY

CRACK FOUND IN THE NO. 2 OR NO. 5 OR NO.

8 STOP FITTING.

Install a new stop fitting at the affected location.

Before further flight.CONDITION 3 (ACTION 2):

Do an adjustment of the forward airstair door. (a) In accordance with Table 2.CONDITION 3 (ACTION 3):

Do inspections of stop fittings No.

2, No. 5, and No. 8 on the forward airstair door in accordance with Table 2.

-Before further flight.CONDITION 4 (ACTION 1):CONDITION 4: NO

CRACK FOUND IN THE NO. 2 OR NO. 5 OR NO.

8 STOP FITTING.

Do an adjustment of the forward airstair door. (a) In accordance with Table 2.CONDITION 4 (ACTION 2):

Do inspections of stop fittings No.

2, No. 5, and No. 8 on the forward airstair door in accordance with Table 2.

(a) Forward airstair door adjustment can be done after all corrective actions have been accomplished.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 8 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Group 2:

Table 2: Forward Airstair Door Cutout - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Door Stop Fittings No. 2, No. 5 and No. 8 - Repeat High Frequency Eddy Current (HFEC) and Detailed Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 4,500 flight cycles after accomplishment of the initial HFEC inspection of the STA 312 floor beam lower chord.

ACTION 1:

Do a HFEC inspection of the STA 312 floor beam lower chord for any crack.

Airplanes that have accomplished the initial HFEC inspection of the STA 312 floor beam lower chord in accordance with Table 1.

-Before further flight.CONDITION 5 (ACTION 1):CONDITION 5: ANY

CRACK FOUND IN THE STA 312 FLOOR BEAM LOWER CHORD.

Contact The Boeing Company for repair instructions and do the repair.

Before further flight.CONDITION 5 (ACTION 2):

Do a detailed inspection of the upper sill common to stop fittings No.

1 and No. 2 and the bracket at stop fitting No. 2 for any crack.

-Before further flight.CONDITION 5.1 (ACTION 1):CONDITION 5.1: ANY

CRACK FOUND IN THE

UPPER SILL COMMON TO STOP FITTING NO. 1 OR NO. 2 OR IN THE

BRACKET AT STOP FIT- TING NO. 2.

Contact The Boeing Company for repair instructions and do the repair.

-Before further flight.CONDITION 5.1 (ACTION 2):

Do an adjustment of the forward airstair door. (a) 4,500 flight cycles-CONDITION 5.1 (ACTION 3):

Repeat the HFEC inspection of STA 312 floor beam lower chord for any crack.

-Before further flight.CONDITION 5.2 (ACTION 1):CONDITION 5.2: NO

CRACK FOUND IN THE

UPPER SILL COMMON TO STOP FITTING NO. 1 OR NO. 2 OR IN THE

BRACKET AT STOP FIT- TING NO. 2.

Do an adjustment of the forward airstair door. (a).

4,500 flight cycles.-CONDITION 5.2 (ACTION 2):

Repeat the HFEC inspection of the STA 312 floor beam lower chord for any crack.

4,500 flight cycles.-Repeat the HFEC inspection of the STA 312 floor beam lower chord for any crack.

CONDITION 6: NO

CRACK FOUND IN THE STA 312 FLOOR BEAM LOWER CHORD.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 9 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Group 2:

Table 2: Forward Airstair Door Cutout - Station (STA) 312 Floor Beam Lower Chord, Upper Sill Structure, and Door Stop Fittings No. 2, No. 5 and No. 8 - Repeat High Frequency Eddy Current (HFEC) and Detailed Inspection Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 9,000 flight cycles after accomplishment of the initial HFEC inspection of stop fittings No. 2, No. 5, and No. 8 on the forward airstair door.

ACTION 2:

Do a HFEC inspection of stop fittings No. 2, No. 5, and No. 8 on the forward airstair door for any crack.

Airplanes that have accomplished the initial HFEC inspection of stop fittings No.

2, No. 5, and No. 8 on the forward airstair door in accordance with Table 1.

-Before further flight.CONDITION 7 (ACTION 1):CONDITION 7: ANY

CRACK FOUND IN THE NO. 2 OR NO. 5 OR NO.

8 STOP FITTING.

Install a new stop fitting at the affected location.

-Before further flight.CONDITION 7 (ACTION 2):

Do an adjustment of the forward airstair door. (a) 9,000 flight cycles.-CONDITION 7 (ACTION 3):

Repeat the HFEC inspection of stop fittings No. 2, No. 5, and No. 8 on the forward airstair door for any crack.

9,000 flight cycles.-Repeat the HFEC inspection of stop fittings No. 2, No. 5, and No. 8 on the forward airstair door for any crack.

CONDITION 8: NO

CRACK FOUND IN THE NO. 2 OR NO. 5 OR NO.

8 STOP FITTING.

(a) Forward airstair door adjustment can be done after all corrective actions have been accomplished.

4. APPROVAL This Requirements Bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this document comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This document and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other Boeing changes.

If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this Requirements Bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this Requirements Bulletin.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 10 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

5. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION NOTE: 1. Unless shown differently, these dimensions and tolerances are used:

– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual (SRM) Chapter 51 – Torque Values:

— Values for structural fasteners are given in 737 Structural Repair Manual, Chapter 51.

— Values for airframe maintenance tasks are included in Chapter 20 of 737 Aircraft Maintenance Manual (AMM).

2. Use the approved fastener, process and material substitutions in accordance with SRM Chapter 51.

3. If the length of any fastener specified in this bulletin does not meet installation standards given in SRM Chapter 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards given in SRM Chapter 51 may be used. In addition, washers may be installed for fastener grip length in accordance with SRM Chapter 51. Refer to SOPM 20-50-01 for alternate full threaded fasteners (screws) needed for installation in this bulletin.

4. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate procedures may be required.

5. These work instructions refer to procedures included in other Boeing documents.

When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.

6. Boeing Service Letter 737-SL-51-042, Damage Reporting and Repair Plan/Design Guidelines, is an acceptable procedure to request information from Boeing for additional structural repair instructions. The Service Letter describes what information must be provided to Boeing before a structural repair can be provided.

7. The instructions in the Work Instructions and the figures can include operation of tools or test equipment. Boeing Engineering Tool Drawings, the Illustrated Tool and Equipment Manual, and the Special Tool and Ground Handling Drawing Index contain data on versions of the tools or test equipment that you can use. It is permitted to use replaced tools. It is not permitted to use superseded tools Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 11 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

8. If it is necessary to remove more parts for access, you can remove those parts. If you can get access without removing identified parts, it is not necessary to remove all of the identified parts. Jacking and shoring limitations must be observed.

9. If shading is used, shaded areas in Figures are to separate the non-critical and non-authoritative information from the critical and authoritative information.

10. When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION numbers for that CONDITION number or OPTION number.

11. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS are in Paragraph 1.E., Compliance.

12. Some Boeing parts are supplied in a temporary configuration. Those parts are identified with a 'U', 'W', or 'Y' in place of the '-' (dash) in the part number. It is permitted to install parts identified with a 'U', 'W', or 'Y' as an alternative to the '-' (dash) part number. Boeing Drawing 005W0900 contains more data.

13. This is an Enhanced Required for Compliance document. There will be a separate Service Bulletin (SB) and a separate Requirements Bulletin (RB). If an RB is mandated by an Airworthiness Directive (AD), then all applicable requirements specified in the RB must be done. For the related SB, some locations are marked RC Start and RC end to identify the requirements that are restated from the RB. For the related SB, the areas between RC Start and RC End, including sub-steps and any figures identified between RC Start and RC End, must be done to comply with the AD.

Therefore, an Alternative Method of Compliance (AMOC) is required for any deviations to steps between RC Start and RC End, including substeps and identified figures.

For the related SB, the steps not between RC Start and RC End may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC; this is provided that the steps between RC Start and RC End, including sub-steps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition.

Figures not required for compliance are omitted from the RB.

14. This is an Enhanced Required for Compliance document. The Boeing processes used to create the Service Bulletin (SB) and the Requirements Bulletin (RB) ensure that the information between "RC Start" and "RC End" in the SB are identical to the information in the same sections (Compliance, Work Instructions...) of the RB which the SB refers to as the related document.

B. WORK INSTRUCTIONS Actions Required for Compliance:

1. Requirements Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: December 13, 2017 737-53A1370 RB 12 of 62 REQUIREMENTS BULLETIN 737-53A1370

ALERTALERT

Pages 13–24 of 62