TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --CONDITION 2CONDITION 2:
ACTION 1:NO REPAIR FOUND and the inspection area has magnetic or protruding head fasteners installed Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s) -FIGURE 10Group 4CONDITION 2 FIGURE 12ACTION 2:
Do the external DUAL FRE-
QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack at areas that do not have magnetic or protruding head fasteners installed -FIGURE 24 FIGURE 26 Group 10 -FIGURE 10Group 4Do the external DUAL FRE-
QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack CONDITION 3:
NO REPAIR FOUND and the inspection area does not have magnetic or protruding head fasteners installed FIGURE 12 -FIGURE 24 FIGURE 26 Group 10 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 121 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 4CONDITION 4 ACTION 1:
Do the REPAIR in accordance with the applicable 737 Structural Repair Manual (SRM) CONDITION 4:
ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has less than 67,500 TFC -737-500 SRM53-00-01, Repair 30, Category A or B only Group 10Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 10Group 4CONDITION 4 FIGURE 12ACTION 2:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 24 FIGURE 26 Group 10 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 122 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 4CONDITION 5 ACTION 1:
Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 5:
ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE
- HFEC INSPECTION previously not accomplished -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 10Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 10 FIGURE 12 Group 4CONDITION 5 ACTION 2, OPTION 1:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 24 FIGURE 26 Group 10 Do PART 1:-CONDITION 5 Open accessACTION 2, OPTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack
(a) -FIGURE 38 FIGURE 40 Group 4 -FIGURE 46 FIGURE 47 Group 10 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 123 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 4CONDITION 6 ACTION 1:
Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 6:
ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -
HFEC INSPECTION previously not accomplished -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 10Or Contact The Boeing Company for alternative repair instructions and do the repair Do PART 1:-CONDITION 6 Open accessACTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack
(a) -FIGURE 38 FIGURE 40 Group 4 -FIGURE 46 FIGURE 47 Group 10 -FIGURE 10Group 4Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 7:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has less than 67,500 TFC FIGURE 12 -FIGURE 24 FIGURE 26 Group 10 -FIGURE 10Group 4CONDITION 8CONDITION 8:
FIGURE 12NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE
- HFEC INSPECTION previously not accomplished OPTION 1:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) -FIGURE 24 FIGURE 26 Group 10 Do PART 1:
Open access -CONDITION 8 OPTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) -FIGURE 38 FIGURE 40 Group 4 -FIGURE 46 FIGURE 47 Group 10 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 124 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) CONDITION 9:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -
HFEC INSPECTION previously not accomplished Open access -FIGURE 38 FIGURE 40 Group 4 -FIGURE 46 FIGURE 47 Group 10 -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 4CONDITION 10 ACTION 1:
Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 10:
ANY CRACK FOUND during the OPEN HOLE
- HFEC INSPECTION -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 10Or Contact The Boeing Company for alternative repair instructions and do the repair Do PART 2:- Close access -FIGURE 10Group 4CONDITION 10 FIGURE 12ACTION 2:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 24 FIGURE 26 Group 10 Do PART 2:-Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 11:
NO CRACK FOUND during the OPEN HOLE
- HFEC INSPECTION Close access -FIGURE 10 FIGURE 12 Group 4 -FIGURE 24Group 10 FIGURE 26 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 125 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 4, 10:
Table 7: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01 Repair 30, Category A or B only Group 4CONDITION 12 ACTION 1:
Do the REPAIR in accordance with the applicable 737 Structural Repair Manual (SRM) CONDITION 12:
ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE
HFEC INSPECTION previously accomplished -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 10Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 10Group 4CONDITION 12 FIGURE 12ACTION 2:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 24 FIGURE 26 Group 10 -FIGURE 10Group 4Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 13:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE
HFEC INSPECTION previously accomplished FIGURE 12 -FIGURE 24 FIGURE 26 Group 10
(a) It is not required to contact Boeing or do the inspections in the area under the existing repair where one of the following repairs has been installed:
1) Boeing ODA-approved and consists of 3 or more fastener rows above and below the production lap splices.
2) Published SRM repair and consists of 3 or more fastener rows above and below the production lap splice.
3) In accordance with 737-300, -500 SRM 53-00-01, Repairs 30 or 31, Category A or B repairs only.
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 126 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 5, 8:
Table 8: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --Do the external DETAILED INSPECTION of the DFEC inspection areas for any repairs and any magnetic or protruding head fasteners installed All Airplanes --CONDITION 1CONDITION 1:
ACTION 1:ANY REPAIR FOUND.
Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s)
(a) -FIGURE 12Group 5CONDITION 1 ACTION 2:
Do the external DUAL FRE-
QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 20Group 8 --CONDITION 2CONDITION 2:
ACTION 1:NO REPAIR FOUND and the inspection area has magnetic or protruding head fasteners installed Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s) -FIGURE 12Group 5CONDITION 2 ACTION 2:
Do the external DUAL FRE-
QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack at areas that do not have magnetic or protruding head fasteners installed -FIGURE 20Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 127 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 5, 8:
Table 8: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 12Group 5Do the external DUAL FRE-
QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack CONDITION 3:
NO REPAIR FOUND and the inspection area does not have magnetic or protruding head fasteners installed -FIGURE 20Group 8 --CONDITION 4CONDITION 4:
ACTION 1:ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has less than 67,500 TFC Contact Boeing for repair instructions and do the repair (b) -FIGURE 12Group 5CONDITION 4 ACTION 2: -FIGURE 20Group 8Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) --CONDITION 5CONDITION 5:
ACTION 1:ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE
- HFEC INSPECTION previously not accomplished Contact Boeing for repair instructions and do the repair (b) -FIGURE 12Group 5CONDITION 5 ACTION 2, OPTION 1:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 20Group 8 Do PART 1:-CONDITION 5 Open accessACTION 2, OPTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack
(a) -FIGURE 40Group 5 -FIGURE 44Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 128 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 5, 8:
Table 8: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --CONDITION 6CONDITION 6:
ACTION 1:ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -
HFEC INSPECTION previously not accomplished Contact Boeing for repair instructions and do the repair (b) Do PART 1:
Open access -CONDITION 6 ACTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack
(a) -FIGURE 40Group 5 -FIGURE 44Group 8 -FIGURE 12Group 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 7:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has less than 67,500 TFC -FIGURE 20Group 8 -FIGURE 12Group 5CONDITION 8CONDITION 8:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE
- HFEC INSPECTION previously not accomplished OPTION 1:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) -FIGURE 20Group 8 Do PART 1:
Open access -CONDITION 8 OPTION 2:
Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) -FIGURE 40Group 5 -FIGURE 44Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 129 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 5, 8:
Table 8: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) CONDITION 9:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -
HFEC INSPECTION previously not accomplished Open access -FIGURE 40Group 5 -FIGURE 44Group 8 --CONDITION 10CONDITION 10:
ANY CRACK FOUND during the OPEN HOLE
- HFEC INSPECTION ACTION 1:
Contact Boeing for repair instructions and do the repair (b) Do PART 2:
Close access - -FIGURE 12Group 5CONDITION 10 ACTION 2:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 20Group 8 Do PART 2:-Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 11:
NO CRACK FOUND during the OPEN HOLE
- HFEC INSPECTION Close access -FIGURE 12Group 5 -FIGURE 20Group 8 ---CONDITION 12CONDITION 12:
ACTION 1:ANY CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE
HFEC INSPECTION previously accomplished Contact Boeing for repair instructions and do the repair (b) -FIGURE 12Group 5CONDITION 12 ACTION 2:
Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 20Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 130 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
Group 5, 8:
Table 8: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14R Lap Splice Skin (Right Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 12Group 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) CONDITION 13:
NO CRACK FOUND during the external
DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE
HFEC INSPECTION previously accomplished -FIGURE 20Group 8
(a) It is not required to contact Boeing or do the inspections in the area under the existing repairs if an installed repair is Boeing ODA-approved and consists of 3 or more fastener rows above and below the production lap splices.
(b) The SRM does not have an applicable repair for these airplanes in Groups 5 and 8.
Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.
Original Issue: May 06, 2019 737-53A1382 RB 131 of 227 REQUIREMENTS BULLETIN 737-53A1382
ALERTALERT
REQUIREMENTS BULLETIN 737-53A1382
ALERT ALERT This Figure applies only to: Group 1, Configuration 1.
STA 1016 STA 727 * 1000 STA 727
- S-1 000000000 - S-14L
FRAME WD
UPPER SKIN
LOWER SKIN
TYPICAL CRACK
STRINGER
TYPICAL SKIN LAP SPLICE / INSPECTION AREA 2835331 FIGURE 1: SECTION 46 - SKIN LAP SPLICE AT STRINGER S-14L - EXTERNAL DUAL FREQUENCY EDDY
CURRENT INSPECTION (SHEET 1 OF 2) Original Issue: May 06, 2019 Export Controlled ECCN: 9E991 737-53A1382 RB Copyright © Unpublished Work - See page 1 for details. 132 of 227