Copy · 737-53A1382-00--RB - BOEING · 227 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0670, the docket of AD 2020-02-16. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 73–84

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --CONDITION 2CONDITION 2:

ACTION 1:NO REPAIR FOUND and the inspection area has magnetic or protruding head fasteners installed Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s) -FIGURE 5CONDITION 2 FIGURE 7ACTION 2:

Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack at areas that do not have magnetic or protruding head fasteners installed -FIGURE 5Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack CONDITION 3:

NO REPAIR FOUND and the inspection area does not have magnetic or protruding head fasteners installed FIGURE 7 -737-300 SRM 53-00-01, Repair 30, Category A or B only CONDITION 4 ACTION 1:

CONDITION 4:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC Do the REPAIR in accordance with the applicable 737 Structural Repair Manual (SRM) Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 5CONDITION 4 FIGURE 7ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 85 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only CONDITION 5 ACTION 1:

CONDITION 5:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished Do the REPAIR in accordance with the applicable 737 Structural Repair Manual Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 5 FIGURE 7 CONDITION 5 ACTION 2, OPTION 1:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Do PART 1:-CONDITION 5 Open accessACTION 2, OPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 25 FIGURE 27 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 86 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only CONDITION 6 ACTION 1:

CONDITION 6:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Do the REPAIR in accordance with the applicable 737 Structural Repair Manual Or Contact The Boeing Company for alternative repair instructions and do the repair Do PART 1:-CONDITION 6 Open accessACTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 25 FIGURE 27 -FIGURE 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 7:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC FIGURE 7 -FIGURE 5CONDITION 8CONDITION 8:

FIGURE 7OPTION 1:NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) Do PART 1:

Open access -CONDITION 8 OPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) -FIGURE 25 FIGURE 27 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 87 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) CONDITION 9:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Open access -FIGURE 25 FIGURE 27 -737-300 SRM 53-00-01, Repair 30, Category A or B only CONDITION 10 ACTION 1:

CONDITION 10:

ANY CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION Do the REPAIR in accordance with the applicable 737 Structural Repair Manual Do PART 2:

Close access - Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 5CONDITION 10 FIGURE 7ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Do PART 2:-Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 11:

NO CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION Close access -FIGURE 5 FIGURE 7 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 88 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-300 SRM 53-00-01, Repair 30, Category A or B only CONDITION 12 ACTION 1:

CONDITION 12:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE -

HFEC INSPECTION previously accomplished Do the REPAIR in accordance with the applicable 737 Structural Repair Manual Or Contact The Boeing Company for alternative repair instructions and do the repair FIGURE 5CONDITION 12 FIGURE 7ACTION 2:

Repeat the external DFEC Inspection of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 13:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE

HFEC INSPECTION previously accomplished FIGURE 7

(a) It is not required to contact Boeing or do the inspections in the area under the existing repair where one of the following repairs has been installed:

1) Boeing ODA-approved and consists of 3 or more fastener rows above and below the production lap splices.

2) Published SRM repair and consists of 3 or more fastener rows above and below the production lap splice.

3) In accordance with 737-300, SRM 53-00-01, Repairs 30 or 31, Category A or B repairs only.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 89 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 5, 8:

Table 3: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --Do the external DETAILED INSPECTION of the DFEC inspection areas for any repairs and any magnetic or protruding head fasteners installed All Airplanes --CONDITION 1CONDITION 1:

ACTION 1:ANY REPAIR FOUND.

Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s)

(a) -FIGURE 7Group 5CONDITION 1 ACTION 2:

Do the EXTERNAL DUAL

FREQUENCY EDDY CUR-

RENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 15Group 8 --CONDITION 2CONDITION 2:

ACTION 1:NO REPAIR FOUND and the inspection area has magnetic or protruding head fasteners installed Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s) -FIGURE 7Group 5CONDITION 2 ACTION 2:

Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack at areas that do not have magnetic or protruding head fasteners installed -FIGURE 15Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 90 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 5, 8:

Table 3: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 7Group 5Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack CONDITION 3:

NO REPAIR FOUND and the inspection area does not have magnetic or protruding head fasteners installed -FIGURE 15Group 8 --CONDITION 4CONDITION 4:

ACTION 1:ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC Contact Boeing for repair instructions and do the repair (b) -FIGURE 7Group 5CONDITION 4 ACTION 2: -FIGURE 15Group 8Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) --CONDITION 5CONDITION 5:

ACTION 1:ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished Contact Boeing for repair instructions and do the repair (b) -FIGURE 7Group 5CONDITION 5 ACTION 2, OPTION 1:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 15Group 8 Do PART 1:-CONDITION 5 Open accessACTION 2, OPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 27Group 5 -FIGURE 35Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 91 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 5, 8:

Table 3: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --CONDITION 6CONDITION 6:

ACTION 1:ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Contact Boeing for repair instructions and do the repair (b) Do PART 1:

Open access -CONDITION 6 ACTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 27Group 5 -FIGURE 35Group 8 -FIGURE 7Group 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 7:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC -FIGURE 15Group 8 -FIGURE 7Group 5CONDITION 8CONDITION 8:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished OPTION 1:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) -FIGURE 15Group 8 Do PART 1:

Open access -CONDITION 8 OPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) -FIGURE 27Group 5 -FIGURE 35Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 92 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 5, 8:

Table 3: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) CONDITION 9:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Open access -FIGURE 27Group 5 -FIGURE 35Group 8 --CONDITION 10CONDITION 10:

ANY CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION ACTION 1:

Contact Boeing for repair instructions and do the repair (b) Do PART 2:

Close access - -FIGURE 7Group 5CONDITION 10 ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 15Group 8 Do PART 2:-Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 11:

NO CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION Close access -FIGURE 7Group 5 -FIGURE 15Group 8 --CONDITION 12CONDITION 12:

ACTION 1:ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE

HFEC INSPECTION previously accomplished Contact Boeing for repair instructions and do the repair (b) -FIGURE 7Group 5CONDITION 12 ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 15Group 8 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 93 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 5, 8:

Table 3: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 7Group 5Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 13:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE

HFEC INSPECTION PREVIOUSLY accomplished -FIGURE 15Group 8

(a) It is not required to contact Boeing or do the inspections in the area under the existing repairs if an installed repair is Boeing ODA-approved and consists of 3 or more fastener rows above and below the production lap splices.

(b) The SRM does not have an applicable repair for these airplanes in Groups 5 and 8.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 94 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 10:

Table 4: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --ACTION 1:All Airplanes Do the external DETAILED INSPECTION of the DFEC inspection areas between STA 827 and STA 908 for any repairs and any magnetic or protruding head fasteners installed --ACTION 2:

Do the external DETAILED INSPECTION of the DFEC inspection areas between STA 727A and STA 827 for any repairs and any magnetic or protruding head fasteners installed --CONDITION 1CONDITION 1:

ACTION 1:ANY REPAIR FOUND.

Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s)

(a) -FIGURE 17CONDITION 1 FIGURE 19ACTION 2:

Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 95 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 10:

Table 4: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --CONDITION 2CONDITION 2:

ACTION 1:NO REPAIR FOUND and the inspection area has magnetic or protruding head fasteners installed Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s) -FIGURE 17CONDITION 2 FIGURE 19ACTION 2:

Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack at areas that do not have magnetic or protruding head fasteners installed -FIGURE 17Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row for any crack CONDITION 3:

NO REPAIR FOUND and the inspection area does not have magnetic or protruding head fasteners installed FIGURE 19 -737-500 SRM 53-00-01, Repair 30, Category A or B only CONDITION 4 ACTION 1:

CONDITION 4:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC Do the REPAIR in accordance with the applicable 737 Structural Repair Manual (SRM) Or Contact The Boeing Company for alternative repair instructions and do the repair -FIGURE 17CONDITION 4 FIGURE 19ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 96 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Pages 97–108 of 227