Copy · 737-53A1382-00--RB - BOEING · 227 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2019-0670, the docket of AD 2020-02-16. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'bb296ea55e6be421081a2726fe2bdb4004709894f5cd44cc6a0fc1ef92e80be4'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 61–72

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-100/200 SRM 53-30-03 Figure 42, Category A or B only Group 1CONDITION 4 ACTION 1:

Do the REPAIR in accordance with the applicable 737 Structural Repair Manual (SRM) CONDITION 4:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC Or Contact The Boeing Company for alternative repair instructions and do the repair -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 2,3,11 -737-400 SRM 53-00-01, Repair 30, Category A or B only Group 6, 7 -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 9 -FIGURE 1Group 1CONDITION 4 ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 73 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-100/200 SRM 53-30-03 Figure 42, Category A or B only Group 1CONDITION 5 ACTION 1:

Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 5:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished Or Contact The Boeing Company for alternative repair instructions and do the repair -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 2, 3, 11 -737-400 SRM 53-00-01, Repair 30, Category A or B only Group 6, 7 -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 9 -FIGURE 1Group 1CONDITION 5 ACTION 2, OPTION 1:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 74 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-CONDITION 5 Open accessACTION 2, OPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 21Group 1 -FIGURE 23Group 2 -FIGURE 23Group 3 -FIGURE 31Group 6, Configuration 1 -FIGURE 29Group 6, Configuration 2-3 -FIGURE 33Group 7 -FIGURE 37Group 9 -FIGURE 23Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 75 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-100/-200 SRM 53-30-03, Repair 42, Category A or B only Group 1CONDITION 6 ACTION 1:

Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 6:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Or Contact The Boeing Company for alternative repair instructions and do the repair -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 2, 3, 11 -737-400 SRM 53-00-01, Repair 30, Category A or B only Group 6, 7 -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 9 Do PART 1:-CONDITION 6 Open accessACTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice at the unrepaired areas for any crack

(a) -FIGURE 21Group 1 -FIGURE 23Group 2 -FIGURE 23Group 3 -FIGURE 31Group 6, Configuration 1 -FIGURE 29Group 6, Configuration 2-3 -FIGURE 33Group 7 -FIGURE 37Group 9 -FIGURE 23Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 76 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 1Group 1Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 7:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has less than 67,500 TFC -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 77 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 1Group 1CONDITION 8CONDITION 8:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more, but less than 70,000 TFC and OPEN HOLE

- HFEC INSPECTION previously not accomplished OPTION 1:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Do PART 1:-CONDITION 8 Open accessOPTION 2:

Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) -FIGURE 21Group 1 -FIGURE 23Group 2 -FIGURE 23Group 3 -FIGURE 31Group 6, Configuration 1 -FIGURE 29Group 6, Configuration 2-3 -FIGURE 33Group 7 -FIGURE 37Group 9 -FIGURE 23Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 78 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 1:-Do the OPEN HOLE - HFEC INSPECTION of the lower skin at all the lower fastener row holes of the lap splice for any crack (a) CONDITION 9:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 70,000 TFC or more and OPEN HOLE -

HFEC INSPECTION previously not accomplished Open access -FIGURE 21Group 1 -FIGURE 23Group 2 -FIGURE 23Group 3 -FIGURE 31Group 6, Configuration 1 -FIGURE 29Group 6, Configuration 2-3 -FIGURE 33Group 7 -FIGURE 37Group 9 -FIGURE 23Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 79 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-100/-200 SRM 53-30-03, Repair 42, Category A or B only Group 1CONDITION 10 ACTION 1:

Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 10:

ANY CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION Or Contact The Boeing Company for alternative repair instructions and do the repair -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 2, 3, 11 -737-400 SRM 53-00-01, Repair 30, Category A or B only Group 6, 7 -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 9 Do PART 2:- Close access -FIGURE 1Group 1CONDITION 10 ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 80 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition Do PART 2:-Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 11:

NO CRACK FOUND during the OPEN HOLE

- HFEC INSPECTION Close access -FIGURE 1Group 1 -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 81 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -737-100/-200 SRM 53-30-03, Repair 42, Category A or B only Group 1CONDITION 12 ACTION 1:

Do the REPAIR in accordance with the applicable 737 Structural Repair Manual CONDITION 12:

ANY CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE -

HFEC INSPECTION previously accomplished Or Contact The Boeing Company for alternative repair instructions and do the repair -737-300 SRM 53-00-01, Repair 30, Category A or B only Group 2, 3, 11 -737-400 SRM 53-00-01, Repair 30, Category A or B only Group 6, 7 -737-500 SRM 53-00-01, Repair 30, Category A or B only Group 9 -FIGURE 1Group 1CONDITION 12 ACTION 2:

Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11 Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 82 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 1-3, Configuration 1; Group 6-7; Group 9, 11, Configuration 1:

Table 1: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition -FIGURE 1Group 1Repeat the external DFEC IN- SPECTION of the lower skin along the lap splice lower fastener row for any crack (a) CONDITION 13:

NO CRACK FOUND during the external

DFEC INSPECTION and the airplane has 67,500 TFC or more and OPEN HOLE

HFEC INSPECTION previously accomplished -FIGURE 3Group 2 -FIGURE 3Group 3 -FIGURE 11Group 6, Configuration 1 -FIGURE 9Group 6, Configuration 2-3 -FIGURE 13Group 7 -FIGURE 17Group 9 -FIGURE 3Group 11

(a) It is not required to contact Boeing or do the inspections in the area under the existing repairs or modifications where one of the following repairs or modifications has been installed:

1) Boeing ODA-approved and consists of 3 or more fastener rows above and below the production lap splices.

2) Published SRM repair and consists of 3 or more fastener rows above and below the production lap splice.

3) In accordance with 737-100/200 SRM 53-30-03, Figure 42, Category A or B repairs only.

4) In accordance with 737-300, -400, -500 SRM 53-00-01, Repairs 30 or 31, Category A or B repairs only.

5) In accordance with either SB 737-53A1177 or SB 737-53A1255.

Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 83 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Group 4:

Table 2: Detailed Inspection, Dual Frequency Eddy Current, and Open Hole - High Frequency Eddy Current Inspections of the S-14L Lap Splice Skin (Left Side) Refer to the listed procedures in SB 737-53A1382 Original Issue or later approved revisions as an accepted procedure Method of ComplianceActionCondition --ACTION 1:All Airplanes Do the external DETAILED INSPECTION of the DFEC inspection areas between STA 787 and STA 908 for any repairs and any magnetic or protruding head fasteners installed --ACTION 2:

Do the external DETAILED INSPECTION of the DFEC inspection areas between STA 727A and STA 787 for any repairs and any magnetic or protruding head fasteners installed --CONDITION 1CONDITION 1:

ACTION 1:ANY REPAIR FOUND.

Contact The Boeing Company for alternative inspection(s), do the inspection(s) and applicable on-condition action(s)

(a) -FIGURE 5CONDITION 1 FIGURE 7ACTION 2:

Do the external DUAL FRE-

QUENCY EDDY CURRENT (DFEC) INSPECTION of the lower skin along the lap splice lower fastener row at the unrepaired areas for any crack (a) Export Controlled ECCN: 9E991 Copyright © Unpublished Work - See page 1 for details.

Original Issue: May 06, 2019 737-53A1382 RB 84 of 227 REQUIREMENTS BULLETIN 737-53A1382

ALERTALERT

Pages 85–96 of 227