TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '09d1efdf7bf38691404334b8bb86dc033914e087806c1441b600155bf9fc356a' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '09d1efdf7bf38691404334b8bb86dc033914e087806c1441b600155bf9fc356a' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Group 1, Configuration 4:
Table 4: Forward and Aft Lower Lobe Cargo Door - Latch Pin Inspection and Replacement Repeat Interval (Not to Exceed) Compliance Time (Whichever Occurs Later) ActionCondition -Within 1,000 flight cycles after the original issue date of this service bulletin Before 6,000 total flight cycles Do a general visual inspection for broken or missing latch pins and a detailed inspection of the latch pins for cracking in accordance with Paragraph 3.B., Work Instructions, Step 5.
All airplanes -Before further flight.Replace each broken or missing latch pin and replace the latch pin(s) adjacent to each broken or missing latch pin in accordance with Paragraph 3.B., Work Instructions, Step 5.a.
OPTION 1 or OPTION 2.
If a latch pin is broken into two or more pieces -Before further flightReplace each cracked latch pin in accordance with Paragraph
3.B., Work Instructions, Step
5.a. OPTION 1 or OPTION 2.
If any crack is found in a latch pin 1,600 flight cycles
(a) Within 6,000 flight cycles after replacement of latch pins.
For each door:
Repeat the general visual inspection for broken or missing latch pins and the detailed inspection of the latch pins for cracking in accordance with Paragraph 3.B., Work Instructions, Step 5.
Doors with all latch pins replaced with new latch pins at all latch fitting locations and at the same maintenance visit in accordance with this service bulletin.
1,600 flight cycles
(a) Within 1,600 flight cycles after the previous inspection of all latch pins.
For each door:
Repeat the general visual inspection for broken or missing latch pins and the detailed inspection of the latch pins for cracking in accordance with Paragraph 3.B., Work Instructions, Step 5.
Doors without all latch pins replaced with new latch pins at all latch fitting locations and at the same maintenance visit in accordance with this service bulletin.
(a) Replacement of a latch pin is not terminating action for the inspections of that latch pin.
F. Approval This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this service bulletin comply with the applicable regulations and are FAA approved, as well as European Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 25 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval before incorporating this service bulletin.
G. Manpower The table below shows an estimate of the task hours necessary to do this inspection for each airplane.
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour data if necessary. The estimate does not include lost time. These are some examples of lost time:
Time to adjust to the workplace Time to schedule the work Time to inspect the work Time to cure the materials Time to make the parts Time to find the tools.
Group 1-2, Configuration 1; Group 3:
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
4.008.002FIGURE 2 (a)
0.250.251Close Access
5.509.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes replacement of all 16 latch pins. It may not be necessary to replace all 16 latch pins.
Group 1-2, Configuration 2:
Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
4.008.002FIGURE 3 (a)
0.250.251Close Access
5.509.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes replacement of all 16 latch pins. It may not be necessary to replace all 16 latch pins.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 26 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
Group 1, Configuration 3:
OPTION 1: DO NOT MODIFY THE LATCH FITTINGS Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
4.008.002FIGURE 4 (a)
0.250.251Close Access
5.509.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes replacement of all 16 latch pins. It may not be necessary to replace all 16 latch pins.
Group 1, Configuration 3:
OPTION 2: MODIFY THE LATCH FITTINGS Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
18.0036.002FIGURE 6 (a)
0.250.251Close Access
19.5037.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes modification of all latch pins and latch fitting bearing plates. It is acceptable to replace latch pins and bearing plates with new parts.
Group 1, Configuration 4:
OPTION 1: DO NOT MODIFY THE LATCH FITTINGS Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
4.008.002FIGURE 5 (a)
0.250.251Close Access
5.509.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes replacement of all 16 latch pins. It may not be necessary to replace all 16 latch pins.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 27 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
Group 1, Configuration 4:
OPTION 2: MODIFY THE LATCH FITTINGS Elapsed HoursTask HoursNumber of PersonsTask
0.250.251Open Access
1.001.001FIGURE 1
18.0036.002FIGURE 7 (a)
0.250.251Close Access
19.5037.50TOTAL FOR EACH AIRPLANE (a)
(a) This estimate includes modification of all latch pins and latch fitting bearing plates. It is acceptable to replace latch pins and bearing plates with new parts.
H. Weight and Balance Changes None.
I. Electrical Load Data Not changed.
J. References
1. Existing Data
a. Engineering Change Memo PRR 85901-105RS
b. Service Related Problem (SRP) 747-SRP-53-0351
c. Boeing Service Bulletin 747-52-2105 and 747-52-2260
d. Overhaul Manual (OHM) 52-34-11, 52-35-11
e. Standard Overhaul Practices Manual (SOPM) 20-10-02, 20-10-03, 20-20-01, 20-30-02, 20-42-03, 20-42-05, 20-50-08, 20-50-10, 20-50-19
f. 747 Maintenance Planning Document (MPD)
2. Data supplied with this Service Bulletin None.
3. Installation Drawings Used in the Preparation of this Service Bulletin TitleDrawing Number SILL INSTL - LOWER MAIN, FWD CARGO DOOR65B04216 SILL INSTALLATION - LOWER MAIN, AFT CARGO DOOR65B04642
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 28 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
These drawings were used to prepare this service bulletin. These drawings are not necessary to make the specified changes, and are not supplied with this service bulletin. These drawings may not be applicable to all airplane configurations or operators.
K. Publications Affected
1. Publications:
None.
2. Damage Tolerance Based Structural Inspections:
Boeing has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance Program. This service bulletin affects FCS. DTI requirements for the structure affected are contained in Paragraph 1.E., Compliance of this service bulletin.
L. Interchangeability and Intermixability of Parts Refer to Paragraph 2.C., Parts Necessary for Each Airplane, for interchangeability and intermixability information.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 29 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 30 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
BLANK PAGE
2. MATERIAL INFORMATION A. Material - Price and Availability The operator can supply the parts and materials shown in Paragraph 2.C., Parts Necessary for Each Airplane. As an alternative, operators can purchase the parts from Boeing Spares. This service bulletin does not show the Boeing price and supply data.
B. Industry Support Information Boeing warranty remedies are not available for the configuration changes, inspection and/or repair procedures given in this service bulletin.
C. Parts Necessary For Each Airplane
1. Kits/Parts None.
2. Parts and Materials Supplied by the Operator Group 1, Configuration 1-2; Group 2-3:
NotesExisting Part Number NameQTYPart Number / Specification
(a) (b)69B02005-4 ORPIN, LATCH1669B02005-6 (69B02005-4 or 65B02005-5 optional) 69B02005-5 OR 69B02005-6
(c)-PRESSURE AND ENVIRON-
MENTAL SEALANT-CHRO-
MATE TYPE 8 OzBMS5-95 TYPE 1, CLASS B
(a) One new latch pin is required for each latch pin location where the existing latch pin is broken or missing. There are 16 latch pins on each airplane.
(b) Discard existing latch pins that are broken or cracked and discard existing latch pins adjacent to broken latch pins.
(c) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
Group 1, Configuration 3-4:
NotesExisting Part Number NameQTYPart Number / Specification
(a)65B04299-1 OR 65B04299-5 BEARING PLATE865B04299-15 (65B04299-7 or 65B04299-13 optional)
(a)65B04299-2 OR 65B04299-6 BEARING PLATE865B04299-16 (65B04299-8 or 65B04299-14 optional)
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 31 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
Group 1, Configuration 3-4:
NotesExisting Part Number NameQTYPart Number / Specification
(b) (c) (d)69B02005-3LATCH PIN1669B02005-6 (69B02005-3, 69B02005-4 or 65B02005-5 optional)
(e)-SOLID FILM LUBRICANT,
LIQUID DISPERSED 8 OzBMS3-8 TYPE I
(e)-PRESSURE AND ENVIRON-
MENTAL SEALANT-CHRO-
MATE TYPE 8 OzBMS5-95 TYPE 1, CLASS B
(e)-PRESSURE AND ENVIRON-
MENTAL SEALANT-CHRO-
MATE TYPE 8 OzBMS5-95 TYPE 1, CLASS C
(a) New bearing plates are required if Option 2, 'Modify the latch fittings', is selected. Alternatively, the existing bearing plates can be modified.
(b) One new latch pin is required for each latch pin location where the existing latch pin is broken or missing. There are 16 latch pins on each airplane.
(c) Discard existing latch pins that are broken or cracked and discard existing latch pins adjacent to broken latch pins.
(d) If a 69B02005-3 latch pin is removed, it is necessary to rework the latch fitting before installing a 69B02005-4, 69B02005-5 or 69B02005-6 latch pin.
(e) See the Qualified Products List at the end of the Boeing Material Specification (BMS) for supplier data.
3. Parts Modified and Reidentified None.
4. Parts Removed and Not Replaced None.
D. Parts Necessary to Change Spares None.
E. Special Tooling - Price and Availability None.
F. Special Tooling Necessary to do this Service Bulletin No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine operator tool supply to make sure all necessary tools are available.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 32 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
3. ACCOMPLISHMENT INSTRUCTIONS A. GENERAL INFORMATION CAUTION: KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR OTHER ELECTRICAL DAMAGE.
NOTE: 1. The instructions identified in Paragraph 3.B., Work Instructions, and the Figure(s) give the recommended sequence of steps. The sequence of steps to do this service bulletin can be changed.
2. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for definition of the acronyms.
3. Obey all of the warnings and cautions given in the specified manual sections.
4. Unless shown differently, these dimensions and tolerances are used:
– Linear dimensions are in inches – Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 inch – Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch – Angular tolerance is plus or minus 2 degrees – Torque limits to tighten nuts and bolts are in 747 SRM 51.
5. Use the approved fastener and process material substitutions in accordance with 747 SRM 51. Alternate fasteners are listed in 747 SRM 51 and Boeing Drawing 012W6100.
6. If the length of any fastener specified in this service bulletin does not meet the installation standards in 747 SRM 51, then a fastener of the same specification, or an approved substitute, with a length which meets the installation standards in 747 SRM 51 may be used.
7. A Detailed Inspection is defined as: An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirrors, magnifying lenses, etc. may be necessary. Surface cleaning and elaborate access procedures may be required.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 33 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
8. A General Visual Inspection is defined as: A visual examination of an interior or exterior area, installation or assembly to detect obvious damage, failure or irregularity.
This level of inspection is made from within touching distance unless otherwise specified. A mirror may be necessary to enhance visual access to all exposed surfaces in the inspection area. This level of inspection is made under normally available lighting conditions such as daylight, hangar lighting, flashlight or drop-light and may require removal or opening of access panels or doors. Stands, ladders or platforms may be required to gain proximity to the area being checked.
9. These work instructions refer to procedures included in other Boeing documents.
When the words "refer to" are used and the operator has an accepted alternative procedure, the accepted alternative procedure can be used. When the words "in accordance with" are included in the instruction, the procedure in the Boeing document must be used.
10. Where the work instructions include installation of a kept part, a new or serviceable part with the same part number can be installed as an alternative to the kept part.
The removed part can be discarded if a new or serviceable part is installed.
B. WORK INSTRUCTIONS
1. Open the lower lobe forward and aft cargo doors to get access to the latch pins on the lower sill.
2. Group 1-2, Configuration 1; Group 3:
Do a general visual inspection for broken or missing latch pins and a detailed inspection of the latch pins for cracking in accordance with FIGURE 1.
NOTE: It is optional to replace all latch pins with new latch pins at all latch fitting locations in accordance with FIGURE 2. Refer to Paragraph 1.E., Compliance.
a. If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s) in accordance with FIGURE 2.
b. If any crack is found in a latch pin, replace the cracked latch pin in accordance with FIGURE
2.
c. Repeat the inspections at the time given in Paragraph 1.E., Compliance.
NOTE: The inspections for broken or cracked latch pins provided by this service bulletin do not replace inspections for latch pin wear. OHM 52-34-11 and OHM 52-35-11 give wear limits for the latch pins.
3. Group 1-2, Configuration 2:
Do a general visual inspection for broken latch pins and a detailed inspection of the latch pins for cracking in accordance with FIGURE 1.
NOTE: It is optional to replace all latch pins with new latch pins at all latch fitting locations in accordance with FIGURE 3. Refer to Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 34 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
a. If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s) in accordance with FIGURE 3.
b. If any crack is found in a latch pin, replace the cracked latch pin in accordance with FIGURE
3.
c. Repeat the inspections at the time given in Paragraph 1.E., Compliance.
NOTE: The inspections for broken or cracked latch pins provided by this service bulletin do not replace inspections for latch pin wear. OHM 52-34-11 and OHM 52-35-11 give wear limits for the latch pins.
4. Group 1, Configuration 3:
Do a general visual inspection for broken or missing latch pins and a detailed inspection of the latch pins for cracking in accordance with FIGURE 1.
NOTE: It is optional to replace all latch pins with new latch pins at all latch fitting locations in accordance with FIGURE 4 or FIGURE 6. Refer to Paragraph 1.E., Compliance.
a. If a latch pin is broken or missing or if any crack is found in a latch pin, do one of the following:
(1) OPTION 1 - DO NOT MODIFY THE LATCH FITTINGS NOTE: This option requires that 69B02005-3 latch pins are installed. 69B02005-3 latch pins are not available from Boeing Spares.
(a) If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s) in accordance with FIGURE 4.
(b) If any crack is found in a latch pin, replace the cracked latch pin in accordance with FIGURE 4.
(2) OPTION 2 - MODIFY THE LATCH FITTINGS NOTE: Accomplishment of this option will change the configuration of the airplane. Refer to Paragraph 1.A., Effectivity.
(a) Modify or replace the latch pins and bearing plates at all latch fitting locations in accordance with FIGURE 6.
1) If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s). Do not modify these latch pins.
2) If any crack is found in a latch pin, replace the cracked latch pin. Do not modify the latch pin.
b. Repeat the inspections at the time given in Paragraph 1.E., Compliance.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 35 of 81 BOEING SERVICE BULLETIN 747-53A2835
ALERTALERT
NOTE: The inspections for broken or cracked latch pins provided by this service bulletin do not replace inspections for latch pin wear. OHM 52-34-11 and OHM 52-35-11 give wear limits for the latch pins.
5. Group 1, Configuration 4:
Do a general visual inspection for broken or missing latch pins and a detailed inspection of the latch pins for cracking in accordance with FIGURE 1.
NOTE: It is optional to replace all latch pins with new latch pins at all latch fitting locations in accordance with FIGURE 5 or FIGURE 7. Refer to Paragraph 1.E., Compliance.
a. If a latch pin is broken or missing or if any crack is found in a latch pin, do one of the following:
(1) OPTION 1 - DO NOT MODIFY THE LATCH FITTINGS NOTE: This option requires that 69B02005-3 latch pins are installed. 69B02005-3 latch pins are not available from Boeing Spares.
(a) If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s) in accordance with FIGURE 5.
(b) If any crack is found in a latch pin, replace the cracked latch pin in accordance with FIGURE 5.
(2) OPTION 2 - MODIFY THE LATCH FITTINGS NOTE: Accomplishment of this option will change the configuration of the airplane. Refer to Paragraph 1.A., Effectivity.
(a) Modify or replace the latch pins and modify the bearing plates at all latch fitting locations in accordance with FIGURE 7.
1) If a latch pin is broken into two or more pieces or is missing, replace the latch pin and replace the latch pin(s) at the adjacent latch fitting location(s). Do not modify these latch pins.
2) If any crack is found in a latch pin, replace the cracked latch pin. Do not modify the latch pin.
b. Repeat the inspections at the time given in Paragraph 1.E., Compliance.
NOTE: The inspections for broken or cracked latch pins provided by this service bulletin do not replace inspections for latch pin wear. OHM 52-34-11 and OHM 52-35-11 give wear limits for the latch pins.
6. Put the airplane back to a serviceable condition.
BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: October 28, 2010 747-53A2835 36 of 81 BOEING SERVICE BULLETIN 747-53A2835