Copy · U.S. DOT/FAA - Service Information · 81 pages

© The Boeing Company. Filed by the FAA in regulations.gov docket FAA-2011-0915; AD 2012-07-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '09d1efdf7bf38691404334b8bb86dc033914e087806c1441b600155bf9fc356a'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Show pages 25–36
Page 37OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT NOTE:

NUMBERS ADJACENT TO

LATCH FITTINGS DENOTE

LATCH FITTING LOCATIONS

DOORWAY LOWER SILL 2 LOCATIONS

SOME STRUCTURE NOT SHOWN FOR CLARITY 1980850 FIGURE 1: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PININSPECTIONS (SHEET 1 OF 3) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 37 of 81

Page 38OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT

BEARING PLATE

TYPICAL PRACI

LOCATIONS

TYPICAL

LATCH FITTING LOCATIONS 1, 3, 5 AND 7

BEARING PLATE

TYPICAL CRACK

LOCATIONS

TYPICAL

I LATCH FITTING LOCATIONS 2,4,6 AND 8 1980876 FIGURE 1: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN INSPECTIONS (SHEET 2 OF 3) Original Issue: October 28, 2010 747-53A2835

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 38 of 81

The step numbers shown below agree with the numbers shown in the circle symbols in the figure.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a)869B02005-( )LATCH PINInspect1

(b)869B02005-( )LATCH PINInspect2

(a) Do a general visual inspection of the latch pin to find if the pin is broken into two or more pieces or is missing.

(b) Do a detailed inspection of the visible external surfaces of the latch pin for cracking. Removal of the bearing plate is not required. This step is not necessary if the latch pin is broken.

FIGURE 1: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN INSPECTIONS (SHEET 3 OF 3)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 28, 2010 747-53A2835 39 of 81 BOEING SERVICE BULLETIN 747-53A2835

ALERTALERT

Page 40OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT This Figure applies only to: Group 1-2, Configuration 1; Group 3.

NOTE:

NUMBERS ADJACENT TO

LATCH FITTINGS DENOTE

LATCH FITTING LOCATIONS

DOORWAY LOWER SILL

- LOCATION:

OME STRUCTURE NOT SHOWN FOR CLARIT 1980858 FIGURE 2: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 1 OF 5) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 40 of 81

Page 41OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT

TYPICAL

LATCH FITTING LOCATIONS 1, 3, 5 AND 7 B INBD A-A 1980898 FIGURE 2: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 2 OF 5) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 41 of 81

Page 42OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT B

TYPICAL

LATCH FITTING LOCATIONS 2, 4, 6 AND 8 C INBD B-B 1981399 FIGURE 2: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 3 OF 5) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 42 of 81

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary to replace all latch pins in this figure. It may not be necessary to replace all latch pins.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a)--SEALANTRemove1

(a)8-BOLTRemove / Keep2

(a)8-WASHERRemove / Keep

(a)8-BRACKET ASSYRemove / Keep

(a) (b)869B02005-( )LATCH PINRemove3

(a) (c)869B02005-6 (69B02005-4 or 69B02005-5 optional) LATCH PINInstall (New)4

(a)8-BOLTInstall (Kept)5

(a)8-WASHERInstall (Kept)

(a)8-BRACKET ASSYInstall (Kept)

(a) (d)-BMS5-95 TYPE 1,

CLASS B

PRESSURE AND ENVI-

RONMENTAL

SEALANT-CHROMATE TYPE Apply6

(e)--SEALANTRemove7

(e)8-BOLTRemove / Keep8

(e)8-WASHERRemove / Keep

(e)8-BRACKET ASSYRemove / Keep

(e) (b)869B02005-( )LATCH PINRemove9

(e) (c)869B02005-6 (69B02005-4 or 69B02005-5 optional) LATCH PINInstall (New)10

(e)8-BOLTInstall (Kept)11

(e)8-WASHERInstall (Kept)

(e)8-BRACKET ASSYInstall (Kept)

(e) (d)-BMS5-95 TYPE 1,

CLASS B

PRESSURE AND ENVI-

RONMENTAL

SEALANT-CHROMATE TYPE Apply12

(a) Do this step where a new latch pin is being installed at latch fitting locations 1, 3, 5 and/or 7.

(b) Discard broken or cracked latch pins and discard latch pins adjacent to broken latch pins.

FIGURE 2: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 4 OF 5)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 28, 2010 747-53A2835 43 of 81 BOEING SERVICE BULLETIN 747-53A2835

ALERTALERT

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(c) Install latch pin wet with BMS5-95 TYPE 1, CLASS B sealant on the faying surface. Make sure sealant is applied to both the outside diameter of the latch pin and the inside diameter of the latch fitting. Make sure all excess sealant is removed. Refer to SOPM 20-50-19 as an accepted procedure.

(d) Refer to SOPM 20-50-19 as an accepted procedure.

(e) Do this step where a new latch pin is being installed at latch fitting locations 2, 4, 6 and/or 8.

FIGURE 2: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 5 OF 5)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 28, 2010 747-53A2835 44 of 81 BOEING SERVICE BULLETIN 747-53A2835

ALERTALERT

Page 45OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT This Figure applies only to: Group 1-2, Configuration 2.

NOTE:

NUMBERS ADJACENT TO

LATCH FITTINGS DENOTE

LATCH FITTING LOCATIONS

DOORWAY LOWER SILL 2 LOCATIONS

SOME STRUCTURE NOT SHOWN FOR CLARITY 1980859 FIGURE 3: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 1 OF 5) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 45 of 81

Page 46OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT

TYPICAL

LATCH FITTING LOCATIONS 1, 3, 5 AND 7 INBD A-A 1981400 FIGURE 3: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 2 OF 5) Original Issue: October 28, 2010 BOEING PROPRIETARY - 747-53A2835 Copyright © Unpublished Work - See page 1 for details. 46 of 81

Page 47OCROpen in PDF

BOEING SERVICE BULLETIN 747-53A2835

ALERT ALERT B

TYPICAL

I LATCH FITTING LOCATIONS 2, 4, 6 AND 8 1 12 INBD B-B 1981401 FIGURE 3: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 3 OF 5) Original Issue: October 28, 2010 747-53A2835

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 47 of 81

The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary to replace all latch pins in this figure. It may not be necessary to replace all latch pins.

MORE DATAQTYIDENTIFICATIONNAMETASKSTEP

(a)--SEALANTRemove1

(a)8-BOLTRemove / Keep2

(a)8-WASHERRemove / Keep

(a)8-NUTRemove / Keep

(a) (b)869B02005-( )LATCH PINRemove3

(a) (c)869B02005-6 (69B02005-4 or 69B02005-5 optional) LATCH PINInstall (New)4

(a)8-BOLTInstall (Kept)5

(a)8-WASHERInstall (Kept)

(a)8-NUTInstall (Kept)

(a) (d)-BMS5-95 TYPE 1,

CLASS B

PRESSURE AND ENVI-

RONMENTAL

SEALANT-CHROMATE TYPE Apply6

(e)--SEALANTRemove7

(e)8-BOLTRemove / Keep8

(e)8-WASHERRemove / Keep

(e)8-NUTRemove / Keep

(e) (b)869B02005-( )LATCH PINRemove9

(e) (c)869B02005-6 (69B02005-4 or 69B02005-5 optional) LATCH PINInstall (New)10

(e)8-BOLTInstall (Kept)11

(e)8-WASHERInstall (Kept)

(e)8-NUTInstall (Kept)

(e) (d)-BMS5-95 TYPE 1,

CLASS B

PRESSURE AND ENVI-

RONMENTAL

SEALANT-CHROMATE TYPE Apply12

(a) Do this step where a new latch pin is being installed at latch fitting locations 1, 3, 5 and/or 7.

(b) Discard broken or cracked latch pins and discard latch pins adjacent to broken latch pins.

FIGURE 3: LOWER LOBE FORWARD AND AFT CARGO DOORS - LATCH PIN REPLACEMENT (SHEET 4 OF 5)

BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.

Original Issue: October 28, 2010 747-53A2835 48 of 81 BOEING SERVICE BULLETIN 747-53A2835

ALERTALERT

Pages 49–60 of 81