TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1f0cd8aee6e2a5bba22b89726972f9575ba3b698d482164d7c770238de91aea6' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1f0cd8aee6e2a5bba22b89726972f9575ba3b698d482164d7c770238de91aea6' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)6BACR15ET9D OR BACR15BB10AD RivetInstall (New)1
(a) Refer to 747-100/200/300 SRM 51-30-02 or 747-SP SRM 51-30-02 as an accepted procedure.
(b) The same size fasteners can be used if the quality of the existing hole meets SRM requirements. The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
FIGURE 9: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – RIVET INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 73 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
BOEING SERVICE BULLETIN 747-53A2887
ALERT ALERT This Figure applies only to: Group 1.
STA 260 STA 260 CANTED STA 340 320 - LBL 22 — LBL 10
- RBL 10 RBL 22 2456080 FIGURE 10: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - RIVET INSTALLATION (SHEET 1 OF 2) Original Issue: December 02, 2015 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. S810 AL
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b)6BACR15ET9D OR BACR15BB10AD RivetInstall (New)1
(a) Refer to 747-100/200/300 SRM 51-30-02 or 747-SP SRM 51-30-02 as an accepted procedure.
(b) The same size fasteners can be used if the quality of the existing hole meets SRM requirements. The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
FIGURE 10: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – RIVET INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 75 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
BOEING SERVICE BULLETIN 747-53A2887
ALERT ALERT This Figure applies only to: Group 4.
STA 260 STA ^ STA CANTED STA 260 ¡ 280 340 RBL 22. STA 340 RBL 10 - LBL 10 - LBL 22 ~ 2454871 FIGURE 11: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - BOLT INSTALLATION (SHEET 1 OF 2) Original Issue: December 02, 2015 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 76 of 85
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b) (c) (d)6BACB30MY6K6X OR BACB30MY6K6Y BoltInstall (New)1
(a) (b) (c) (d)6BACC30M6 OR BACC30AC6 CollarInstall (New)
(a) BACB30MY6K6X bolt is to be installed with a BACC30M6 collar. BACB30MY6K6Y bolt is to be installed with a BACC30AC6 collar.
(b) Kept or the same size fasteners can be used if the quality of the existing hole meets SRM requirements.
The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
(c) Install wet with BMS 5-95 sealant. Refer to SOPM 20-50-19 as an accepted procedure.
(d) Refer to 747-100/200/300 SRM 51-30-02 as an accepted procedure.
FIGURE 11: LEFT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – BOLT INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 77 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
BOEING SERVICE BULLETIN 747-53A2887
ALERT ALERT This Figure applies only to: Group 4.
STA 260 STA 260 CANTED STA 340 STA 300
STA STA 340 320 LBL 22 -LBL 10
- RBL 10
- RBL 22 2456077 FIGURE 12: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB - BOLT INSTALLATION (SHEET 1 OF 2) Original Issue: December 02, 2015 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 98 10 82
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. The QTY numbers shown below are the number of parts necessary for this figure.
More DataQtyIdentificationNameTaskStep
(a) (b) (c) (d)6BACB30MY6K6X OR BACB30MY6K6Y BoltInstall (New)1
(a) (b) (c) (d)6BACC30M6 OR BACC30AC6 CollarInstall (New)
(a) BACB30MY6K6X bolt is to be installed with a BACC30M6 collar. BACB30MY6K6Y bolt is to be installed with a BACC30AC6 collar.
(b) Kept or the same size fasteners can be used if the quality of the existing hole meets SRM requirements.
The maximum size of any new fastener is 0.312" diameter, maintain 1.5D minimum edge margin.
(c) Install wet with BMS 5-95 sealant. Refer to SOPM 20-50-19 as an accepted procedure.
(d) Refer to 747-100/200/300 SRM 51-30-02 as an accepted procedure.
FIGURE 12: RIGHT SIDE STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB – BOLT INSTALLATION (SHEET 2 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 79 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
This Appendix applies only to: Group 1, 4.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle MODIFICATION.PART 1 NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION.PART 2 STA 280-320 VERTICAL BEAM OUTER CHORD AND WEB SURFACE OR OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION.
PART 3 SECONDARY INSPECTION AND REPAIR.PART 4 ANY CRACK FOUND during PART 2.CONDITION 1 NO CRACK FOUND during PART 2.CONDITION 2
SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION DONE. ANY CRACK FOUND during PART 3.
CONDITION 3
SURFACE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION DONE. NO CRACK FOUND during PART 3.
CONDITION 4
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION DONE. ANY CRACK FOUND during PART 3.
CONDITION 5
OPEN HOLE HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION DONE. NO CRACK FOUND during PART 3.
CONDITION 6 APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION (SHEET 1 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 80 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION (SHEET 2 OF 4) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 81 of 85 BOEING SERVICE BULLETIN 747-53A2887
ALERTALERT
BOEING SERVICE BULLETIN 747-53A2887
ALERT ALERT
WHICHEVER OCCURS LATER WITHIN 12 BEFORE WITHIN 3,000 MONTHS AFTER 25,000 TOTAL FLIGHT CYCLES THE ORIGINAL
FLIGHT AFTER THE PART ISSUE DATE OF CYCLES 1 MODIFICATION THIS SERVICE
BULLETIN DO PART 2 CONDITION 1 CONDITION 2
NOT TO EXCEED BEFORE FURTHER 3,000 FLIGHT
FLIGHT CYCLES REPEAT PART 2 AT DO PART 4 UNREPAIRED AREAS ONLY NOT TO EXCEED 3,000
FLIGHT CYCLES REPEAT PART 2 AT UNREPAIRED AREAS ONLY 2459396 APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION (SHEET 3 OF 4) Original Issue: December 02, 2015 Export Controlled ECCN: 9E991 - BOEING 747-53A2887 PROPRIETARY - Copyright © Unpublished Work - See page 1 for details. 82 of 85
BOEING SERVICE BULLETIN 747-53A2887
ALERT ALERT
WHICHEVER OCCURS LATER WITHIN 2,200 FLIGHT BEFORE 30,000 TOTAL FLIGHT CYCLES CYCLES AFTER THE ORIGINAL ISSUE DATE OF THIS SERVICE
BULLETIN DO PART 3 CONDITION 3 CONDITION 4 CONDITION 5 CONDITION 6 BEFORE FURTHER NOT TO EXCEED 3,000 BEFORE FURTHER BEFORE FURTHER
FLIGHT FLIGHT CYCLES FLIGHT FLIGHT DO PART 4 DO PART 4 INSTALL NEW
FASTENERS NOT TO EXCEED 3,000 NOT TO EXCEED 6,000
FLIGHT CYCLES
FLIGHT CYCLES REPEAT PART 3 AT
UNREPAIRED AREAS ONLY REPEAT PART 3 AT
UNREPAIRED AREAS ONLY 2459997 APPENDIX A: LOGIC DIAGRAM FOR TABLE 1 - MODIFICATION AND INSPECTION (SHEET 4 OF 4) Original Issue: December 02, 2015 PROPRIETARY - Copyright ® Unpublished Export Controlled ECCN: 9E991 - BOEING 747-53A2887 Work - See page 1 for details. 83 of 85
This Appendix applies only to: Group 2-3, 5-6.
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source for tasks required for compliance.
1. The table below gives the description for the parts and conditions called out in the logic diagrams.
DescriptionTitle NOSE WHEEL WELL BODY STRUCTURE DETAILED INSPECTION.PART 2 SECONDARY INSPECTION AND REPAIR.PART 4 ANY CRACK FOUND during PART 2.CONDITION 1 NO CRACK FOUND during PART 2.CONDITION 2 APPENDIX B: LOGIC DIAGRAM FOR TABLE 2 - DETAILED INSPECTION (SHEET 1 OF 2) Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: December 02, 2015 747-53A2887 84 of 85 BOEING SERVICE BULLETIN 747-53A2887