TextPartly OCR
Some pages are OCR from a scan. OCR can misread letters and numbers.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8be4fa4ba4e85edb16a97fe81f1d16e656fcb14a398b2ee83051ee2c58f65828' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '8be4fa4ba4e85edb16a97fe81f1d16e656fcb14a398b2ee83051ee2c58f65828' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Commercial Airplanes 747 Service Bulletin ALERT Number: 747-57A2343 Original Issue: September 12, 2013 Revision 1: June 23, 2014 ATA System: 5752 2751 SUBJECT: WINGS - Trailing Edge Flaps - Outboard Flap Inboard Actuator Attach Fittings (Gimbals No.s 2 and 7) - Inspection, Rework, and Replacement
THIS BULLETIN IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS SERVICE BULLETIN TO THE NEW OWNER.
1. PLANNING INFORMATION A. Effectivity
1. Airplanes This service bulletin is for the airplane(s) shown below. Refer to PRR 85901-129RS for data about this change.
Refer to Service Bulletin Index D6-30300 Part 3 for Airplane Variable Number, Line Number, and Serial Number data.
DESCRIPTIONCONFIGURATIONGROUP 747-100, -100B, -100B SUD, -200B, -200C, -200F, -300, -400, -400D, -400F, 747SR Airplanes line numbers 1 through 1263. These airplanes were not delivered with a 65B08564-7 Actuator Attach Fitting, but could have had a 65B08564-7 Actuator Attach Fitting installed by service bulletin 747-57A2316.
-1 747-400 and -400F Airplanes line numbers 1264 through 1419. These airplanes were delivered with a 65B08564-7 Actuator Attach Fitting and could have replaced the 65B08564-7 Actuator Attach Fitting by service bulletin 747-57A2316 with an Actuator Attach Fitting not affected by this service bulletin.
-2 Airplane Models:
747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 13 of 68
GroupVariable Number 1RA001 - RA034 1RA101 - RA115 1RA161 - RA164 1RA201 - RA203 1RA216 - RA217 1RA245 - RA246 1RA251 - RA266 1RA301 - RA318 1RA351 - RA360 1RA369 - RA373 1RA401 - RA418 1RA501 - RA502 1RA521 - RA528 1RA532 - RA548 1RA551 - RA552 1RA559 - RA561 1RA581 - RA582 1RA585 1RA601 - RA602 1RA631 - RA635 1RA651 - RA652 1RA671 - RA677 1RA701 - RA702 1RA721 - RA731 1RA741 - RA745 1RA749 - RA750 1RA761 - RA762 1RA781 - RA784 1RA901 - RA916 1RB001 - RB016 1RB041 - RB044 1RB071 - RB075 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 14 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RB101 - RB102 1RB411 - RB413 1RB421 1RB601 - RB607 1RB681 - RB697 1RB711 1RB721 - RB723 1RB741 - RB748 1RD001 - RD004 1RD021 - RD022 1RD041 - RD059 1RD071 - RD072 1RD081 - RD083 1RD091 - RD092 1RD101 - RD104 1RD121 - RD127 1RD131 - RD144 1RD166 - RD167 1RD171 - RD172 1RD181 - RD183 1RD201 - RD204 1RD221 - RD227 1RD231 - RD235 1RD241 - RD243 1RD251 - RD262 1RD271 - RD272 1RD291 - RD292 1RD301 - RD302 1RD311 1RD351 - RD358 1RD361 - RD366 1RD381 - RD383 1RD411 - RD414 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 15 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RD421 - RD426 1RD431 - RD435 1RD441 - RD442 1RD451 - RD456 1RD461 1RD471 - RD475 1RD513 - RD519 1RD531 - RD533 1RD551 1RD561 1RD571 1RD581 - RD583 1RD591 - RD593 1RD601 - RD607 1RD621 - RD623 1RD641 - RD649 1RD651 - RD659 1RD661 1RD671 1RD681 - RD682 1RD691 - RD692 1RD701 - RD702 1RD721 - RD722 1RD741 - RD742 1RD751 - RD755 1RD761 1RD771 - RD775 1RD781 - RD783 1RD791 - RD792 1RE001 2RF001 - RF006 1RJ131 - RJ133 1RJ151 - RJ152 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 16 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RJ301 - RJ303 1RJ321 - RJ322 1RJ331 - RJ333 1RL401 2RL402 - RL403 1RL411 - RL414 2RL415 - RL436 2RL451 - RL456 2RL461 - RL462 2RL471 - RL481 2RL491 - RL492 2RL501 - RL502 2RL511 - RL516 2RL521 - RL522 2RL531 - RL534 2RL551 2RL561 - RL568 2RL571 - RL572 2RL576 - RL577 2RL579 2RL581 - RL586 1RL651 - RL653 2RL654 - RL655 2RL671 - RL675 2RL681 - RL684 2RL751 - RL752 1RM001 - RM004 2RM005 - RM007 2RM010 1RM011 - RM012 2RM013 1RM021 - RM024 1RM026 - RM027 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 17 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 2RM028 - RM030 1RM036 - RM039 2RM040 1RM041 2RM042 - RM045 1RM051 2RM052 - RM053 1RM071 1RM081 - RM084 1RM091 1RM096 - RM097 1RM116 - RM117 1RM126 - RM131 2RM132 1RM136 - RM147 1RM156 - RM157 2RM158 1RM166 - RM177 1RM191 - RM192 1RM231 - RM233 1RM241 - RM244 2RM245 - RM246 1RM261 - RM264 1RM316 - RM318 1RM331 - RM333 1RM341 2RM351 - RM355 2RM366 - RM367 2RM401 - RM403 2RM426 2RM431 2RM441 - RM443 2RM445 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 18 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RM801 - RM802 2RM803 1RM811 - RM813 1RM851 - RM853 2RM854 - RM855 1RM856 2RM857 - RM859 1RM861 2RM862 - RM863 1RM871 - RM873 2RM874 - RM880 1RM881 - RM885 2RM886 - RM890 1RM891 - RM899 1RM901 - RM903 2RM904 - RM906 1RM911 1RR001 - RR005 1RR021 - RR025 1RR031 1RR201 - RR206 1RR221 - RR226 1RR261 - RR267 1RR301 - RR310 1RR331 - RR332 1RR336 1RR341 - RR345 1RR361 - RR362 1RR421 - RR422 1RR431 - RR432 1RR441 - RR442 1RR451 1RR501 - RR504 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 19 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RR521 - RR522 1RR526 1RR531 1RR551 - RR556 1RR561 1RR566 1RR701 1RR721 - RR724 1RR746 - RR748 1RR851 - RR856 1RR861 - RR862 1RR951 - RR952 1RS001 - RS002 1RS201 1RS211 - RS212 1RS221 - RS222 1RS231 - RS241 1RS251 - RS259 1RS263 1RS265 - RS268 1RS271 - RS276 1RS291 - RS292 1RS301 - RS306 1RS311 - RS320 1RS331 - RS333 1RS341 - RS342 1RS699 1RS701 - RS703 1RS711 - RS713 1RS721 - RS722 1RS731 - RS732 1RS741 - RS743 1RS751 - RS752 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 20 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RS761 - RS762 1RS771 1RS781 - RS782 1RS786 1RT001 - RT014 1RT021 - RT022 1RT031 - RT035 1RT041 - RT047 1RT061 1RT071 - RT075 1RT101 - RT103 1RT121 1RT131 - RT137 1RT151 - RT152 1RT161 - RT168 1RT401 - RT412 1RT431 - RT447 1RT451 - RT469 1RT471 - RT499 1RT501 - RT535 1RT551 - RT568 1RT571 - RT591 1RT601 - RT657 1RT671 - RT673 1RT681 - RT682 1RT691 - RT699 1RT701 - RT704 1RT711 - RT717 1RT741 - RT757 1RT776 - RT777 1RT781 - RT784 1RT801 - RT803 1RT811 - RT814 Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 21 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
GroupVariable Number 1RT831 - RT837 1RT861 - RT864 1RT876 - RT880 1RT931 - RT932 1RT945 - RT949 1RT951 - RT955 1RT966 - RT967 1RU001 - RU006 1RU016 - RU017 1RU031 - RU032 1RU051 - RU052 1RU059 - RU062 1RU081 - RU083 1RU101 - RU102 1RU121 - RU132 1RU801 - RU809 1RU831 - RU841
2. Spares Affected Examine your spares supply for the parts or components identified below. If any parts or components are found, refer to Paragraph 3.B., Work Instructions for the recommended action.
Part Number 65B08564-7 B. Concurrent Requirements None.
C. Reason The inspections and replacement in this service bulletin will help prevent fracture of the outboard flap, inboard actuator support fitting assembly (no. 2 or no. 7 gimbal). A fractured inboard actuator fitting combined with the loss of the outboard actuator load path could result in the uncontrolled retraction of the outboard flap and subsequent damage to flight control systems at the rear spar. Uncontrolled retraction of the flap or damage to flight control systems could lead to reduced controllability of the airplane.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 22 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
One operator reported the fracture of a 65B08564-7 actuator attach fitting. The actuator attach fitting had approximately 5,500 flight-cycles and 20,600 flight-hours. The actuator attach fitting was installed by service bulletin 747-57A2316. The actuator attach fitting fractured in the internal conical machined area. Inspection of the actuator attach fitting revealed that a portion of the interior surface was machined with a cylindrical profile instead of a conical profile. This results in reduced wall thickness. The thickness of the fitting in the cylindrical area was approximately half the design wall thickness. The operator inspected the remaining airplanes in their fleet and found another actuator attach fitting with the cylindrical defect with a wall thickness below design requirements. An inspection of spare 65B08564-7 actuator attach fittings at Boeing revealed some actuator attach fittings with the cylindrical defect with reduced wall thicknesses. In addition, some actuator attach fittings which did not have the cylindrical defect had wall thicknesses which were below design requirements. Reduced wall thickness results in the inability of the actuator attach fitting to carry required loads. Some of the actuator assemblies inspected at Boeing also were found to have a machining defect at the point where the tapered machining transitioned to the hemispherical machining at the top of the inner surface. This defect was visible under the finishes.
This defect could eventually lead to fatigue cracks and subsequent fracture.
This service bulletin provides instructions to inspect and replace 65B08564-7 no. 2 and no. 7 actuator attach fittings which could have insufficient wall thickness or the machining defect.
Boeing Service Related Problem (SRP) 747-SRP-57-0264 is related to this service bulletin.
Boeing Fleet Team Digest (FTD) 747 FTD 57-13003 is related to this service bulletin.
Revision 1 is sent to:
1. Add an inspection for a machining defect that can reduce the durability of the fitting. During inspection of the actuator fittings, many actuators were found to have a machining defect, visible under the protective finishes, in the area where the tapered machining transitioned to the hemispherical machining at the top of the inner surface.
2. Limit the compliance time that fitting assemblies with a wall thickness 0.130 inch or greater and less than 0.140 inch and do not have a machining defect can remain in-service, to 48 months or 3,000 flight-cycles after the original issue date of this service bulletin, whichever occurs first.
D. Description Part 1: Outboard Flap, Inboard Actuator Attach Fitting - Part Number Inspection Extend the trailing edge flaps to detent 30 and deactivate. Disconnect actuator ball screw nut from the actuator attach fitting. Do an inspection of the Actuator Attach Fitting to determine if a 65B08564-7 actuator attach fitting is installed. Attach actuator ball screw to the actuator attach fitting. Activate and retract the trailing edge flaps.
Part 2: Outboard Flap, Inboard Actuator Attach Fitting - DET Inspection Extend the trailing edge flaps to detent 30 and deactivate. Disconnect actuator ball screw nut from the actuator attach fitting. Do a Detailed (DET) inspection of the Actuator Attach Fitting to determine if it has the cylindrical defect. Attach actuator ball screw to the actuator attach fitting. Activate and retract the trailing edge flaps.
Part 3: Outboard Flap, Inboard Actuator Attach Fitting - Minimum Thickness and Machining Defect Inspection Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 23 of 68 BOEING SERVICE BULLETIN 747-57A2343
ALERTALERT
Extend the trailing edge flaps to detent 30 and deactivate. Remove the Actuator Attach Fitting. Do an Ultrasonic (UT) inspection or mechanically determine the minimum wall thickness of the Actuator Attach Fitting. Do a DET to determine if the machining defect is present on the inner wall. Install the Actuator Attach Fitting. Activate and retract the trailing edge flaps.
Part 4: Outboard Flap, Inboard Actuator Attach Fitting - Replacement Extend the trailing edge flaps to detent 30 and deactivate. Remove the Actuator Attach Fitting. Install actuator attach fitting assemblies not affected by this service bulletin. Activate and retract the trailing edge flaps.
Part 5: Outboard Flap, Inboard Actuator Attach Fitting - Overhaul Extend the trailing edge flaps to detent 30 and deactivate. Remove the Actuator Attach Fitting. Overhaul the Actuator attach fitting and remove the machining defect. Install the Actuator Attach Fitting. Activate and retract the trailing edge flaps.
Revision 1 - More work is required on airplanes with an actuator attach fitting 65B08564-7 installed which accomplished PART 3: OUTBOARD FLAP, INBOARD ACTUATOR ATTACH FITTING - MINIMUM THICKNESS INSPECTION in accordance with the Original Issue of this service bulletin. These airplanes should do PART 3: OUTBOARD FLAP, INBOARD ACTUATOR ATTACH FITTING - MINIMUM THICKNESS AND MACHINING DEFECT INSPECTION to determine if the machining defect is present and accomplish any required follow-on actions within the compliance time in Paragraph 1.E., Compliance.
The work in this service bulletin is done in the maintenance zone(s) given below.
Group 1:
Affected Maintenance Zones ZoneModel 587, 687747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR Group 2:
Affected Maintenance Zones ZoneModel 587, 687747-400, 747-400F E. Compliance Federal Aviation Administration (FAA) Airworthiness Directive AD 2013-23-03 is related to this service bulletin. The effective date of AD 2013-23-03 is November 29, 2013.
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to Revision 1 of this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in Revision 1 of this service bulletin mandatory.
Export Controlled ECCN: 9E991 - BOEING PROPRIETARY - Copyright © Unpublished Work - See page 1 for details.
Original Issue: September 12, 2013 747-57A2343Revision 1: June 23, 2014 24 of 68 BOEING SERVICE BULLETIN 747-57A2343